Top Aluminum Profile Pipe Reviews

Flashers #3 Silicone High Temp Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 1/4\ to 5\) - 100% Made in The USA

  • MANUFACTURER DIRECT: 100% Made in the USA by an American Workforce.
  • Silicone Flashers are rated to service a continuous temperature range of -100 to +450 degrees Fahrenheit..
  • Flashers’ flexible rubber won’t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile..
  • Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors..
  • Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC)..
Check Stock

3 1 x 29 6 Runner Hand Knotted Sky Blue Fine Turkish Oushak Oriental Rug G9742

  • Bi-metal type, HSS M42 grade, 64-1/2" long, 1/2" wide, 0.025" thick, 14/18tpi.
  • Perfect for cutting soft ferrous metal only.
  • 14/18tpi is suitable for cutting thin pipe tube profiles etc, do not cut any non-ferrous metal like aluminum etc..
  • Suits all bandsaws which use 64-1/2" long, 1/2" wide bandsaw blade.
Check Stock

Flashers #7 Silicone Grey High Temp Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 6\ to 11\) - 100% Made in The USA

  • MANUFACTURER DIRECT: 100% Made in the USA by an American Workforce.
  • Silicone Flashers are rated to service a continuous temperature range of -100 to +450 degrees Fahrenheit..
  • Flashers’ flexible rubber won’t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile..
  • Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors..
  • Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC)..
Check Stock

TOLESA Pipe Cutter Tool 3/16-2 Inch 5-50mm Heavy Duty Metal Pipe Cutter With Deburring Tool Pipe Reamer Sharp Copper Tube Cutter Speed Cutting Tubing Cutter For Stainless Steel Aluminum Brass Pipe

  • ...y ball bearing rollers to ensure a firm grip on pipe during tube cutting process, especially for various metal, stainless steel, copper pipes and tubes. It saves you from the trouble of uneven cutting surface due to unstable clamping..
  • 【Heavy Duty】 - The copper pipe cutter is made of high-density but lightweight aluminum alloy, which is durable and compact. Copper tubing cutter can ensure your cutting work is smooth and will not break after many cuts, and has a longer service life. And the aluminum alloy body makes the conduit cutter more suitable for cutting high-density metal materials..
  • 【Clean Cutting】 - The stainless steel pipe cutter with 6 ball bearings provides you with smooth cutting and improved cutting efficiency. However, some small burrs on the edges are inevitable in the process of cutting tube. That's why our aluminum pipe cutter is equipped with a deburring tool pipe reamer, which consists of a sturdy plastic construction and a high-speed steel blade. It can ream the inside and outside of the cut to prevent scratching..
  • 【Ease Of Use】 - The bottom of the brass pipe cutter is equipped with a knob, which is comfortable to hold, can quickly adjust the conduit cutter , and provides a strong clamping force to ensure the stability of....
Check Stock

Loreso Mini Copper Pipe Tubing Cutter - Mini Tube Cutter for Copper Brass Aluminum, Thin Stainless Steel for 1/8 to 1 1/8 (3-28mm) OD Pipes)

  • MINI TUBING AND PIPE CUTTER – Manufactured with high-quality, heavy duty alloy steel, this tube cutter will efficiently cut copper, brass, aluminum and thin steel pipes. This pipe cutter provides a fast, economical way to do a clean cut..
  • VERSATILE PIPE CUTTER FOR ALL INDUSTRIES – This copper pipe cutter is suitable for use on construction sites, HVAC and refrigeration, plumbing jobs, manufacturing, heating, decorating or even at garage repair shops.
  • EASY TO OPERATE – Cut like a BOSS with Loreso manual pipe cutter, Rotate the knob to grip tube, Revolve tube cutter around the pipe, Tighten grip smoothly after each full circle until full cut..
  • VARIOUS TUBE CUTS – Cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 1/8 to 1 1/8 Inch ( 3-28mm ) Outer Diameter OD..
  • STURDY ALUMINUM CAST FRAME – Tube Cutter body is made of light weight and durable Aluminum Casting, Blade is built using CNC machining with most durable and high quality Alloy Steel..
Check Stock

Imachinist S601314 Bi-Metal Metal Cutting Band Saw Blades 60-inch X 1/2-inch X 14 TPI

  • Bi-metal type, HSS M42 grade, 64-1/2" long, 1/2" wide, 0.025" thick, 14/18tpi.
  • Perfect for cutting soft ferrous metal only.
  • 14/18tpi is suitable for cutting thin pipe tube profiles etc, do not cut any non-ferrous metal like aluminum etc..
  • Suits all bandsaws which use 64-1/2" long, 1/2" wide bandsaw blade.
Check Stock

RIDGID 31115 Model 848 Aluminum Straight Pipe Wrench, 48-inch Plumbing Wrench

  • Professional strength aluminum pipe wrench is nearly 40% lighter than comparable same-size heavy-duty models with the same durability and ease of use.
  • Sturdy I-beam handle with full floating forged hook jaw for superior gripping and quick adjustments.
  • Aluminum pipe wrench features a non-stick adjustment nut, and self-cleaning threads with easily replaceable hook jaw, heel jaw and spring assembly.
  • Straight pipe wrench is suitable for all types of pipe work.
  • 48-inch (1200 mm) pipe wrenches are ideal for pipe diameters of 3 inch (80 mm) to 5 inch (125 mm) with a capacity of up to 6 inches (150 mm).
Check Stock

60mm Preheater Hose Air Inlet Pipe,Air Duct Drain Hose Car Heater Duct Vent Warm Air Outlet for 2000/6000 W Air Heaters, Aluminum Foil Heater Duct Pipe Car Air Ducting Hose/1pc

  • 【Aluminum Foil Heater Duct】- Made of high quality aluminum foil material, durable and practical to use. Anti-shock, corrosion, flame resistant, Car Heater Pipe Auto Aluminum Foil Flexible Air Ducting..
  • 【Hot & Cold Air Ducting Hose, Car Warm Heater Duct Pipe Air Ducting Replacement】- Hot & cold air ducting,for Domestic, for Planer etc. Perfect to replacement the old or broken Heater Duct. Vent Warm Air Outlet Aluminum Foil Replacement Hose Extendable Pipe..
  • 【Retractable Car Air Heater Duct Pipe】- Extendable 60, 75 mm diameter air inlet pipe can be extendable up to 800 mm.42mm extendable:42 mm diameter air inlet pipe can be extendable up to 1000 mm..
  • 【Three diameters】-Three diameters, suitable for most outlet hose to meet your needs..
  • 【Occasions】- Mainly used for 2000 W or 6000 W air heaters.Hot and cold, air ducting for heater, etc..
Check Stock

FILOL 2PCS Blue Aluminum Alloy Universal Car Turbo Whistle, Car Refitting Turbo Whistle Exhaust Pipe Sound Turbo Tail (L)

  • ✿After installed this product, the pressure blowing out of your exhaust will make your vehicle sounds like a turbo vehicle with the turbo system or blow off valve..
  • ✿Size Exhaust volume Exhaust Pipe Diameter S:10.26x5.25cm, M:10.3x5.9cm,L:11.6x6.3cm,XL:12x6.9cm.
  • ✿Made of durable material,anti-corrosion and wear resistance.Light weight.Easy to install on the car’s tailpipe..
  • ✿Beautiful appearance, very fashionable,it is the first choice for decorative car.Perfect match and make your car fashionable and unique..
  • ✿KEY: Turbo Sound Noise Exhaust Muffler Pipe Whistle - Aluminum Sound Exhaust Muffler Pipe Whistle Blow Off Valve BOV Simulator - Small to Extra Large Aluminum Alloy Universal Car Turbo Whistle Car Refitting Turbo Whistle Exhaust Pipe Sound Turbo Tail Turbo Sound Noise Exhaust Muffler Pipe Whistle - Aluminum Sound Exhaust Muffler Pipe Whistle Blow Off Valve BOV Simulator - Small to Extra Large.
Check Stock

Bravex Tube Cutter 1/4\ to 2\

  • [High-quality Blade] This pipe cutter blade is made form aluminum alloy, wear-resistant. It will never get rust..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube. Cutting range is up to 2" (50mm)(OUTER DIAMETER)..
  • [Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel blades. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes)..
  • [Cutting Efficiency] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
  • [100% Money-Back Guarantee] If you're not satisfied, return back to us, no-hassle refund or product replacement..
Check Stock

RIDGID 47057 Model 812 Aluminum Straight Pipe Wrench, 12-inch Plumbing Wrench , Small , Silver

  • Professional strength, lightweight aluminum wrench is nearly 40% lighter than a same-size RIDGID heavy-duty model with the same durability and ease of use.
  • I-beam handle with full floating forged hook jaw for superior gripping and quick adjustments.
  • Features self-cleaning threads with easily replaceable hook jaw, heel jaw, and spring assembly.
  • Aluminum pipe wrench includes special hook and heel jaws for plastic coated pipe.
  • 12-inch (300 mm) pipe wrenches are ideal for pipe diameters of 1/2 inch (13 mm) to 1-1/2 inch (40 mm) with a pipe capacity of up to 2 inches (50 mm).
Check Stock

MAXPOWER 14-Inch Pipe Wrench, 40% Lighter Aluminum Plumbing Wrench, Heavy Duty Straight Pipe Wrenches Jaw Max Capacity 2 inch

  • 14-inch Aluminum straight pipe wrench, clamping capacity Up to 2 inch, Overall length 350mm.
  • Nearly 40% lighter than traditional iron pipe wrench of same size, this aluminum pipe wrench offers a great durability, and lightweight for easy transport.
  • This plumber pipe wrench is suitable for tightening and loosening threaded pipes of all forms, easy for use in residential plumbing works and repair.
  • Straight pipe wrench has serrated jaw and adjustable nut, covered self-cleaning threads, replaceable hook jaw and spring assembly, Do Not recommend to use this wrench as hammer.
  • I-beam handle for powerfully gripping and quick adjustments.
  • MAXPOWER pipe wrench, maximum torque exceeds ANSI standards.
Check Stock

NDS 640 Square Grate with Low-Profile Adapter Fits 3 in. & 4 in. Drain Pipes & Fittings, 6 in, Black Plastic

  • Protect your drainage system by using a grate and low-profile adapter on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining moderate water flows from lawns, landscaped areas, patios, walkways, and under downspouts.
  • Fits 3 in. & 4 in. Sewer and Drain Pipes & Fittings, 3 in. & 4 in. Single-Wall Corrugated Pipes, 3 in. & 4 in. Triple-Wall Pipes. 44 GPM flow rate. 14.4 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installed—recommended for pedestrians, bicycles, and wheelchair traffic.
  • Place low-profile adapter on top of drain pipe or drain fitting, for a soil-tight fit.
  • place 6 in. drain grate on top of low-profile adapter. 6 in. Square Drain Grates (with Low-Profile Adapters) are available in a variety of colors and materials.
  • Grate top is 5-7/8 in. square with ¼ in. grate openings.
  • Low-profile adapter is 2-1/2 in. high, top opening is 6-3/16 in. square.
  • Comes with one 6 in. Square Grate and Low-Profile Adapter. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects—or we’ll replace it.
  • NDS grates are a proven alternative to traditional concrete d....
Check Stock