Top Aluminum Products Alloys Reviews

Midwest Tungsten Service TIG Welding Tungsten Electrodes 10-Pack Blue - 2% Lanthanated Tungsten WL20/EWLa-2 3/32

  • PREMIUM ten (10) pack of 3/32" tungsten electrodes for TIG welding for the beginner, intermediate, and professional TIG welder. From students to industrial and artistic users, these fit your use.
  • HIGHEST RATED and most reviewed 2% Lanthanated Tungsten TIG electrodes on Amazon ready to help you make the perfect weld. Noted for their reliability and consistent performance..
  • EXCEPTIONAL for both AC & DC applications and for welding aluminum alloys, magnesium alloys, nickel alloys, copper alloys, titanium alloys, low-alloyed steels, and non-corroding steels.
  • UNITED STATES based manufacturing & knowledgeable customer service staff are here to help you pick the perfect TIG tungsten for your welding job, large or small..
  • FREE materials safety data sheet (MSDS) and certificate of conformance linked below, the tungsten electrodes adhere to American Welding Society standard A5.12M/A5.12:2036.
Check Stock

AMTAST Barcol Impressor Portable Indentation Hardness Tester, Test Range 0~100HBa Equal to 25~150HBW

  • Portable indentation hardness tester. Single hand operation.
  • Easy conversion. The test results can be converted to HB, HR,HV and HW easily through conversion table..
  • High sensitivity. Featured with 100 scales, much more sensitive than Webster hardness testers applied in aluminum alloys industry..
  • Wide valid testing range equivalent to Brinell hardness 25-150HBW..
  • Barcol Impressor is mainly applied to test aluminum and aluminum alloys..
Check Stock

Tungsten Electrodes for Tig Welding 2% Grey Ceriated Tungsten Assorted- 5PCS 3/32 + 5PCS 1/16

  • Premium 10PK tig welding tungsten electrodes 2% ceriated gray WC20/EWCe-2, 5PCS 1/16" & 5pk 3/32" ceriated tungsten electrodes for tig welding.
  • The ceriated tungsten tig electrode is with high performance: No spitting,stable consistent arc starts and good stability with low burn-off rate..
  • The 2% ceriated tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length 2% grey ceriated tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

uxcell 4Pcs 6063 Seamless Aluminum Round Straight Tubing Tube 1 Feet Length 0.234 Inches ID 0.312 Inches OD

  • The aluminium tube is commonly used for frames, boat building, gardening products, general fabrications and shop fitting,DIY aircrafts or other remote control models..
  • Aluminum Round Tubes are available in alloys 6063 offering better corrosion resistance and weldability than other Aluminum Round Tub.
  • The interior is smooth with no seam and is available in an extruded structural or a drawn seamless aluminum round tube for higher precision applications..
  • It can be easily cut and drilled, and can be welded with the right equipment..
  • Different size aluminum tubing for your needs. Please check it right before purchasing..
Check Stock

Captain America 20 inch Metal Shield Cosplay Shield Original Version 1

  • ✪Full-size replica made of aviation aluminum, high-quality finishes and details, with iconic red, white and blue patterns, leather straps, precise....
  • ✪Aerospace aluminum alloy is the leader among aluminum alloys, with high strength and excellent resistance to peeling corrosion, and is usually used....
  • ✪The protective cover is made by die-casting process, which completely exceeds the stamping process on the market. Has die-caster. The protective....
  • ✪The diameter is 20 inches, which can be compared with 1: 1 measurement. The handle is made of leather material, which is comfortable to wear，It....
  • ✪After-sales service guarantee: If there is damage during transportation, or if you are dissatisfied with our products, please contact us as soon as....
Check Stock

TRIM Cutting & Grinding Fluids E206N/1 Long Life Emulsion, 1 gal Jug

  • Dramatically extends useful life without the need for tank-side biocides or fungicides.
  • Low foaming for todays demanding high-pressure, high-volume applications.
  • Compatible with a very wide range of material including steels, copper, and aluminum alloys, and many plastics and composites.
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys.
  • Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives.
Check Stock

3M Roloc Disc 777F, TR, 2 in x NH, 80 YF-weight

  • A blend of ceramic and aluminum oxide mineral self-sharpens and offers improved durability and cut-rate over aluminum oxide.
  • 3M Roloc attachment system enables efficient and secure attachment and removal of the disc.
  • Polyester backing is extremely tough to support medium-pressure applications while maintaining consistent performance in both wet and dry applications.
  • Grinding aid reduces grinding temperatures for processes involving heat-sensitive alloys such as stainless steel, nickel alloys, and titanium.
  • Heat-resistant resin coating bonds abrasive to backing for durability under pressure, heat, and water.
Check Stock

3mirrors ALUMINUM Tungsten Electrode Sharpener Grinder Head TIG Welding Tool with Cut-Off Slot Multi-Angle & Offsets, 5X 25mm Double Diamond Wheels, 1X Connecting Rod

  • Premium 10PK purple rare earth blend (EWG) tig welding tungsten electrodes , 5pk 1/16" & 5pk 3/32" purple tungsten electrodes for tig welding.
  • The purple tungsten tig electrode is with great welding performance: non radioactive, reliable arc-striking, low burn-off rate and good stability with low burn-off rate..
  • The rare earth blend tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length rare earth blend (EWG) tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

WeldingCity 4-pcs Low Temperature Flux Cored Zinc/Aluminum (Zn98-Al2) Brazing Rod 20″ for Joining Al-Al/Cu Alloy in HVAC/Heat Exchanger

  • Premium quality flux cored low temperature Zinc/Aluminum 20″-long brazing rods Zn78-Al22, Zn98-Al2 and Zn92-Al8 series for joining Al-Al and Al-Cu alloy in HVAC, heat exchanger and refrigeration repairs..
  • Flux core means no manual flux application required. Non corrosive flux and ensures good oxidation protection and capillary fill. Ideal for joining aluminum alloys of the 1000, 3000, and 6000 series as well as aluminum to copper welding..
  • Good replacement to equivalent products such as Lucas Milhaupt AL822/AL802 and Harris Aluxcor Zinc-Aluminum brazing filler metals, etc..
  • Brazing rod dimension: 20-in (500mm) length and .078″ (2.0mm) diameter.
  • brazing temperatures as shown in spec. table in picture. Available packages: 4-pcs, 1/2-lb and 1-lb..
  • U.S. based welding supplier. Strong technical support with experienced customer service to address buyer’s any question..
Check Stock

Benchmark Abrasives Ball Shape Premium Tungsten Carbide Burr with 1/4 Inch Shank Aluminum Cut Rotary Tool Head Diameter 1/2 Inch Die Grinder Drill Bit SD-5NF

  • Benchmark Abrasives aluminum cut carbide burrs are used on aluminum, copper, zinc alloys, and magnesium as well as for non-metal materials such as plastics, hard rubber, and some woods..
  • The strong and durable design of the carbide burrs ensures fast stock removal without loading. Suitable to use for medium stock removal, deburring, finishing, and cleaning..
  • Designed to meet industrial standards, our carbide burrs are recommended to be used with Die Grinders and hand-held pneumatic grinders, and other power drills..
  • Efficient surface conditioning discs are used in various industries like automotive, transportation, mining, shipbuilding, foundries, construction, welding, fabrication, petrochemical, etc..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction lifeline of our brand..
Check Stock

Minisland Large Portable Metal Aluminum Toothpick Holders Keychain Pocket Outdoor Travel Small Q-tips Pill Containers Waterproof Dia.23mm Silver and Black Set -MSL144

  • SPECIFICATIONS: This pair of aluminum alloy metal containers includes 1 silver and 1 black. Outer Size: Diameter 0.91 x 3.43 Inch Height, Inner Size:....
  • LARGE CAPACITY PORTABLE CARRIER: Compared with other mini pocket containers in market, this one is big enough for storing variety of small things less....
  • LIGHT STURDY AND STYLISH: This pocket holder is made of aluminum. To compare with other metal alloys, Aluminum is lighter for easy carrying. And....
  • SCREW CAP AND O-RING SEAL DESIGN: The tight sealing lid and rubber band ring construction help to protect the interior small items from humidity and....
  • NOTICE AND QUALITY GUARANTEE: For easy screwing, we suggest you not filling it too full. Better to leave 1/3 space out. Though our products were 100%....
Check Stock

Benchmark Abrasives Tree Shape - Radius Premium Tungsten Carbide Burr with 1/4 Inch Shank Aluminum Cut Rotary Tool Head Diameter 1/2 Inch Die Grinder Drill Bit SF-5NF

  • Benchmark Abrasives aluminum cut carbide burrs are used on aluminum, copper, zinc alloys, and magnesium as well as for non-metal materials such as plastics, hard rubber, and some woods..
  • The strong and durable design of the carbide burrs ensures fast stock removal without loading. Suitable to use for medium stock removal, deburring, finishing, and cleaning..
  • Designed to meet industrial standards, our carbide burrs are recommended to be used with Die Grinders and hand-held pneumatic grinders, and other power drills..
  • Efficient surface conditioning discs are used in various industries like automotive, transportation, mining, shipbuilding, foundries, construction, welding, fabrication, petrochemical, etc..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction lifeline of our brand..
Check Stock

homEdge Carburetor Cleaning Tool Kits, Carb Carburetor Jet Cleaner for ATV, UTV, Motorcycle Moped Welder Carb, Jet Dirt Remover, Set of 10 Cleaning Needles + 5 Nylon Brushes + 13 Cleaning Wires Set

  • Fast: Once parts are placed in the ultrasonic parts cleaner solution, and cleaning initiated, parts can be very quickly cleaned in an environmentally friendly manner..
  • Safe on All Metals and Non Toxic: This non toxic Ultrasonic Cleaning Solution for Carburetors is safe on all metals including aluminum, aluminum alloys, brass, cast iron, copper, copper alloys, ferrous metals, magnesium, yellow alloys, zinc, and coins. Does not contain borates, phenols, nitrates, SARA 313,EPA 33/50 listed ingredients, or butyl cellusolve..
Check Stock