Top Aluminum Flat Bar 16 Reviews

ImpressArt - Bracelet Bending Bar Kit Tool for Bending Metal Blank Bracelets Cuffs Bangles for Metal Stamping & Metal Engraving

Used to easily bend metal bracelet stamping blanks into cuffs, bracelets, and bangles to a flat top that sits nicely on the wrist with minimal effort..
Bends metals including: aluminum, brass, copper, Alkeme, thin steel and more.
Create unique & personalized metal bracelets with the ImpressArt Bracelet Bending Bar Kit. The kit comes complete with one bracelet bending bar and....
Includes 8 bracelet stamping blanks in 2 different sizes: (4) Aluminum Bracelet Blanks, 1/4" x 6", 14 gauge & (4) Aluminum Bracelet Blanks, 3/8" x 6",....
Bending Bar easily shapes metal strips into bracelets. Simply place the strip into the notch and bend around the curved arch. Then do the same for the....

Check Stock

Highbanker, Gold Sluices and Power Sluice Kits - Gold Mining Equipment (Mini Highbanker + Pump)

... x 3 inch high sides. Weight is about 10 pounds..
Black ribbed matting in the top for fast gold ID, and a built in spray bar. In the bottom of the sluice is ribbed miner's carpet with expanded metal. The expanded metal helps keep the gold in the box and prevents rocks from knocking it loose. The riffles and cage are aluminum..
This Mini Highbanker comes with 12 volt 750-gph pump for plenty of water volume, 4 foot recirculating hose, alligator clips, and a recirculating pump bracket. It has adjustable legs for easy slope control..
The riffles and cage are aluminum. The benefits of aluminum is that it is light weight, and it is easier to use a magnet to remove the black sand build up. The sluice and hopper are made out of strong .080 gauge 5052 aluminum. Riffles are made out of .063 gauge 5052 aluminum, which is as thick as a quarter. The side rails of the riffle cage is made of 3/16" thick flat stock aluminum. Riffle cages are bolted in place..
This Mini-Recirculating Highbanker is made to fit in a plastic tub (not included). All you need to buy is the tub, a 12V lawn mower battery, and a small pail to catch the waste rock. Or just as easily use without a tub -- place the mini hibanker in a stream. Made in the USA. Ships via UPS to street addresses in con....

Check Stock

Tynulox 99.9% Copper Anode Sheet, 1/8' × 1' × 8' Pure Copper Flat Bar, 110 Copper Strip for Copper Electroplating, Jewelry Plating

❀---- Sizes: 9Ga/3mm x 25mm x 200mm (1/8" x 1" x 8" ).
❀---- High Quality Materials:99.9% 110 Copper. During use, pure 110 copper is not affected by corrosion, temperature and pressure. In addition, 99.9% copper has favorable ductility and conductivity..
❀---- Convenient to Use: Copper flat bar is easy to be deformed as needed to meet different needs and has a smooth surface. You can cut the copper metal bar by yourself to choose the desired length..
❀---- Scope of Application: Copper flat stock can be used for DIY handicrafts and electricity consumption system, etc. Copper metal flat bar is suitable for power distribution equipment, bar or electrical engineering and metal smelting, chemical caustic soda and other large current electrolytic smelting engineering..
❀---- Multiple Sizes: You can choose diversiform sizes of copper flat bars. (Thickness: 1/16" ~ 1/4",Width: 0.4" ~ 1", Length:8")..

Check Stock

Mobile Hydraulic Oil Cooler Fan & Shroud Model DC-12 12 Volt w/OC-62 With or Without Bypass No Bypass

Heavy Duty Aluminum Bar and Plate Construction.
No Bypass, 2 Bar Bypass, 5 Bar Bypass, 9 Bar Bypass.
Comparable to D10, D16, 4UJF4, 4UJF5, LDC-007, LDC-011.

Check Stock

MICTUNING 60 inch Aluminum Frame Triple Tailgate Light Bar 864 LED Waterproof with 4-Way Flat Connector Wire - Full Function Amber Sequential Turn Signal, Red Brake Running, White Reverse Light

...ailgate Light Bar equipped with 864pcs SMD 2835 LED chips, twice brighter than others. Really lights up everything behind the truck, adds a clear visibility to the rear drivers and ensure driving safety. Please measure your truck size before purchasing --- 60''(long)×0.8''(wide)×0.5''(high)[1 pcs].
FULL FUNCTION - Aluminum tail light bar can work as full functions of sequential turn signal, brake, running, reverse and strobe light.Sequential turn signals make your driving intention more clearly, not only improve driving safety at night, but also update your truck’s appearance..
HIGH PERFORMANCE - Fully sealed in a weatherproof clear silicone material, with IP68 waterproof rate, it works well in rain, snow, or even -20°F weather. Aluminum frame with fast heat dissipation, more durable, longer service life.24 month warranty, just feel free to contact us..
EASY INSTALLATION - Come with a 4-Way Flat Connector Wire, plug and play. Simply tear off the double-sided tape behind tail light bar and stick on the tailgate. Please read the instruction included in the package carefully before installation..
UNIVERSAL FITMENT - This Aluminum Frame light bar is suitable for most pickup trucks, trailers, cars, SUV, RV, VAN, etc.( ONLY for American cars).For some spe....

Check Stock

Careland Gold Mining Fine Gold Recovery Mini Sluice Box Recirculating with 110V Pump, V Mat & Gold Stop Mat

... x 3 inch high sides. Weight is about 10 pounds..
Black ribbed matting in the top for fast gold ID, and a built in spray bar. In the bottom of the sluice is ribbed miner's carpet with expanded metal. The expanded metal helps keep the gold in the box and prevents rocks from knocking it loose. The riffles and cage are aluminum..
This Mini Highbanker comes with 12 volt 750-gph pump for plenty of water volume, 4 foot recirculating hose, alligator clips, and a recirculating pump bracket. It has adjustable legs for easy slope control..
The riffles and cage are aluminum. The benefits of aluminum is that it is light weight, and it is easier to use a magnet to remove the black sand build up. The sluice and hopper are made out of strong .080 gauge 5052 aluminum. Riffles are made out of .063 gauge 5052 aluminum, which is as thick as a quarter. The side rails of the riffle cage is made of 3/16" thick flat stock aluminum. Riffle cages are bolted in place..
This Mini-Recirculating Highbanker is made to fit in a plastic tub (not included). All you need to buy is the tub, a 12V lawn mower battery, and a small pail to catch the waste rock. Or just as easily use without a tub -- place the mini hibanker in a stream. Made in the USA. Ships via UPS to street addresses in con....

Check Stock

MichaelPro MP018006 6-Inch Deep Coping Saw, Coping Frame comes with Replacement Blades, Hand Woodworking Tool

【HEAVY DUTY FRAME】Specially crafted with durability in mind, our deep coping saws are made of heavy duty frames that allows for longer life span and you do not have to worry about our saws breaking on the job..
【SPECIFICATIONS】6” frame depth, 6-1/2” blade length with 16TPI tooth count. Flat bar frame and with steel pins. Replacement Blades comes in 16T, 20T, 24T and 28T..
【RUST-RESISTANT FINISH】Coated with rust and corrosion resistant finish, you can use this saw over and over again many times, without worrying about having to change it often..
【APPLICATIONS】Use it for woodworking (timber, lumber, angle wood etc.), wood plate, PVC (plastic, pipe, etc.), and light metal (eg. aluminum). Ideal for DIY, craftwork and dismantling jobs..
【NON-SLIP COMFORTABLE GRIP】An ergonomically designed non-slip handle provides a soft grip, hence better control, stability and enhances maneuverability..

Check Stock

NEW 9 pcs 1/2

9 Piece boring bar set features C-6 carbide for use in harder materials but also works great in aluminum and other soft metals All shanks are held to 0.0000-0.0005" from the nominal diameter and made of special heat treated alloy steel. Shank Diameter- 1/2".
Contains: (3) pcs. 5/16" minimum bore (1 ea. 3/4" bore depth x 2-1/4" overall, 1 ea. 1-1/8" x 2-5/8", & 1 ea. 1-1/2" x 3").
Contains: (3) pcs. 7/16" minimum bore (1 ea. 1-1/8" bore depth x 2-5/8" overall, 1 ea. 1-11/16" x 3-3/16", & 1 ea. 2-1/4" x 3-3/4"), (3) pcs. 9/16" minimum bore (1 ea. 1-1/2" bore depth x 3" overall, 1 ea. 2-1/4" x 3-3/4", & 1 ea. 3" x 4-1/2").

Check Stock

FUTURO™ Plantar Fasciitis Night Support 48507ENR, Adjustable.

Cogetoro plantar fasciitis splint night provides relief during the night from the pain and discomfort of plantar fasciitis and Achilles tendonitis. By adjusting the angle the aluminum bar insert , you can change how much tension is applied to your plantar fascia.（80-90 degree.
PRODUCT HIGHLIGHTS:This plantar fasciitis night splint provides two aluminum bars. If your fasciitis symptoms are mild, it is recommended to use thin aluminum bar first. If you feel the effect is not obvious, please try the thick aluminum bar. Then Cogetoro will accompany you throughout the treatment process Cogetoro plantar fasciitis brace has two straps that pulls the toes upward and the foot into a slight dorsiflexion position.Other brands have only one strap..
This plantar fasciitis relief can be used by men and women, and fits either your right or left foot. You can also try to wear the splint for 1 hour at a time, before you go to bed, then work up to wearing it for the entire night..
2 Pack Arch Support for Plantar Fasciitis Support- Soft fabric & SBR arch support distribute pressure for your feet. Ease pain from plantar fasciitis, flat feet, heel spur, high arch aggravation relieve arch pain and heel pain from long time standing and walking..

Check Stock

Thunder Skateboard Trucks Hollow Lights Metallic Script Purple 147 (8.0\) Pair

Independent Trucks Bar trucks feature flat black hanger and baseplate with 2 color bar pad print, red cushions and pivot cup, and black and red hardware..
Durable all purpose truck for any type of skateboarding. 55mm tall for optimal performance and wheel clearance..
A356 T6 Aluminum Hanger & Baseplate. The best lightweight aluminum alloy heat treated to T6 condition for strength, durability, and grind feel..
SCM435 Chromoly Steel Axle. Highest quality and durability available. Grade 8 Kingpin..
149s measure 8.5" from axle tip-to-tip. Recommended deck size 8.25" - 8.75". Includes 2 Trucks..

Check Stock

Chainsaw Mill 24 Inch Portable Planking Milling Bar Size 14 to 24 Inch

24 inch chainsaw mill length fits chainsaw bar length 12"-24”.
Cuts planks from 0.20" to 12" thick works on big and small jobs cuts any length of timber.
High quality steel and aluminum construction totally portable quick and easy set up clamps directly on chainsaw bar no drilling required.
Log milling attachment provides a flat surface for the mill to ride on to get flat even cuts.
Attach portable sawmill with adjustable side bracket to your chainsaw and you're ready for the big or small jobs cutting any log length.

Check Stock

Reese 58369- Replacement Part, Ultra Frame 1500 lbs. Spring Bar

Replacement Weight Distribution Chain Kit.
Replace the hardware and chains for your Reese weight distribution system.
Works with either a trunnion bar or round bar application.
Includes Chains, (2) 3/8"-16 U-bolts, (4) 3/8"-16 Grade 2 lock nuts, (4) 3/8" Flat washers, and 2 Bolts.

Check Stock

UPANBIKE Mountain Bike Road Bike Handlebar Aluminum Alloy Flat Bar 31.8mm*620mm

Fits most kinds of bike,such as mountain bike,road bike and etc..
IMPORTANT NOTE:Before ordering, please do make sure to measure and confirm the diameter that you actually need. Thank you..

Check Stock