Top Aluminum Engine Boat Reviews

Shoreline Marine Universal Dual Flow Motor Flusher with Rectangular Muffs Easy Installation

  • MOTOR ACCESSORY: Keep your boat’s engine in good condition by protecting it with the efficient and durable Shoreline Marine Dual Flow Flusher. This equipment is designed for most inboards and outboards and helps increase its life by protecting it from contaminants..
  • PROTECTS ENGINE: This motor flusher helps extend your outboard engine’s life by regularly flushing away salt, silt, and grime after use. Not only clean, but you can also winterize your boat with the help of this essential boat accessory and keep your investment in good condition..
  • EASY-TO-OPERATE: You can connect this boat motor flusher to a standard garden hose and help keep your motor clean by flushing away sand, salt, silt, and mud. If you need to tune your engine and make minor adjustments when on the water, you can trust this tool..
  • SUITABLE FOR: This boat motor cleaner works efficiently on most outboard and inboard I/O's. It allows idling for engine adjustments when out of the water and provides water to both sides of the water intake. Installs just in seconds and requires no tools for installation or removal..
  • CALCUTTA OUTDOORS: A leading manufacturer of consumer products for the outdoor sports and recreation market providing performance-driven products, including fishing rods, tac....
Check Stock

Newport Vessels 10ft 6in Inflatable Dinghy Boat Transom Sport Tender - 5 Person - 15HP USCG Rated, White/Gray

  • USCG rated triple layered 0.9mm/1,100 denier specialty coated PVC, marine wood flooring Inflatable sport boat tender..
  • Includes: Aluminum Framed Marine Wood Flooring, 1 aluminum bench seat, 2 aluminum oars, carrying & storage bag, foot pump, drain plug, towing D-rings, topside D-rings for Bimini and accessories, carrying handles, oar locks and oar holders.
  • Materials: Boat: Triple Layered 0.9mm / 1,100 denier Polyester reinforced and anti corrosive coated PVC. Material ensures protection against corrosion, sun, salt, and all destructive elements..
  • Recommended tube pressure: 3.6 PSI. Materials: Floor: 24mm thick aluminum framed custom hard marine coated plywood floor..
  • Dimensions and Specificatons: Model: The Newport, Inflated Length: 10 ft 6 in, Tube Diameter 18 in, Inflatted Width: 5 ft, Chambers: 4, Weight: 123 lbs, Max Power: 15hp, Max Load: 1,248 lbs, Max Persons: 5, High pressue inflatable Keel & V hull..
  • (Newport) DIMENSIONS & CAPACITY: Model: Newport. Length: 10 ft 6 in. Tube diameter: 18 in, Inflated width: 63 in. Chambers: 3 + 1 keel. Max Power: 15HP. Max Engine Weight: 105 lbs. Outboard Shaft: Short 15”-17”. Max Load: 1248 lbs, Max Persons: 5..
Check Stock

osemar Jack Plates for Outboard Motor 8'' Setback Aluminum Manual Jack Plate

  • Boat Jack Plate gives you a maximum height of 5.500 inches to lift your long axle engine and make it work on short axle beam boats!.
  • Outboard Jack Plate Weighs 32 lbs, 225 Maximum Horsepower, 8 inches of adjustable vertical movement..
  • Outboard Motor Jack Plate is made of high strength polished Aircraft Quality Aluminum..
  • Outboard Jack Plate adjusts easily by turning one steel bolt, Professional installation is highly recommended..
  • Package Include:1 x Adjustable Outboard Boat Jack Plate..
Check Stock

TUFFIOM Outboard Boat Motor Stand, Engine Carrier for Storage Maintenance, 440lbs Weight Capacity, Easy Assembly

  • STEEL CONSTRUCTION: With tubes made of steel, the boat motor stand, weighing about 13.2lbs, can hold up to 440lbs. And the size of the hanging board is about 15.5” x 7.9” and its thickness is about 1.6”, allowing it to hold outboard engine more securely..
  • EASY ASSEMBLY: Designed with simple structure, the outboard engine stand can be assembled in a breeze..
  • MULTI-PURPOSE: The boat motor stand is ideal for storing and maintaining the outboard engine in the garage. It can help you hold the outboard engine for repair or maintenance..
  • TRIANGLE STRUCTURE FOR STABILITY: The boat motor stand is designed with triangle structure, which allows it to stand more stably..
  • DIMENSIONS: The overall dimensions of the boat motor stand is about 23.4”W x 18.9”D x 35.8”H..
Check Stock

Redneck Convent Boat Motor Flusher Round Circular Cup Muff Plunger with Hose Fitting Flush Kit – Marine Inboard Engine Flushing

  • INBOARD FLUSHER: Use the Redneck Convent Boat Motor Flusher Round Circular Cup Muff Plunger with Hose Fitting Flush Kit – Marine Inboard Engine Flushing to obliterate salt and mineral build up along with other contaminants from your inboard boat engine with through hull water intakes when hooked up to a garden hose.
  • Effective way to flush engine with fresh water to prevent clogging and corrosion and allow for engine adjustments.
  • EASY INSTALLATION: Requires no tools for installation or removal and perfect for hard-to-reach areas.
  • Simply twist on to attach to your intake and connect your garden hose to the included quick connect fitting to run motor out of the water or use to winterize motor.
  • Never turn water supply to full force or damage to drive may occur.
  • FITS YOUR BOAT: Fully adjustable and compatible with inboard engines with through hull water intakes.
  • As long as your boat includes a water pick-up on the bottom of the boat, this flusher is for you.
  • Make sure the boat intake scoop is less than 5 inches (12.7cm) and you have enough clearance under your trailer.
  • NO LEAKAGE: Round (circular) cup is easy to put on and provides maximum water flow while allowing zero leakage once you start the engine.
  • Cup dimensions 5.6-inch outer diameter (OD), 4.9-inc....
Check Stock

VEVOR Outboard Propeller Replace for OEM 48-8M0084495 4 Blades 14 x 19 Aluminium Boat Propeller Compatible w/ 135-300HP 2-Stroke & 4-Stroke Outboards Alpha&Bravo I Stern-Drives RH

  • ...eter and pitch. Pitch is the theoretical distance a propeller will move through the water during each revolution, and diameter is the distance across a circle encompassing all the propeller blades. With 14" diam. x 19" pitch, our outboard boat propeller will ensure your ship moves ahead smoothly and quickly..
  • Sturdy Aluminum Alloy: Our corrosion-proof outboard speed props are made from aluminum alloy and built to last. It features 260-300 MPA tensile strength, making it resistant to rust and deformation, even under seawater and freshwater..
  • Premium Performance: The outboard propeller has a light weight, which will not add additional burden on boat to ensure safe operation. And the propeller is easy to install, and it is uneasy to fall off once installed. Besides the appropriate cup and rake will increase the boat’s speed and fuel economy..
Check Stock

Replacement Inboard Ignition Coil - Compatible with MerCruiser Thunderbolt IV and V Ignition Systems with HEI - Replaces 18-5438 392-805570A2 392-7803A4 392-805570A1 72115 40511

  • Replacement Inboard Marine Engine Ignition Coil - The ignition coils or ignition coil plug provides spark for your engine. Over time the factory....
  • Compatible Replacement for Mercruiser GM V6, V8 308 & 350 Engine With Thunderbolt IV & V Ignition System - Only works with HEI (High Energy Ignition)....
  • Replaces Part# 18-5438, 392-805570A2, 392-7803A4, 392-805570A1, 72115, 40511, 9-29701, 64570, RL5438. The ignition coil of your boat can easily be....
  • OEM Fit, Quality, Finish - While this is not a genuine part, it is a direct replacement for your boat or boat engine and it will appear, fit and work....
  • 2 years or 24,000 Mile Warranty - This ignition coil pack comes complete with a 2 year or 24, 000 mile warranty. If the coil ever fails on your boat....
Check Stock

15 HP Fishing Boat Engine 420cc Outboard Boat Motors Gasoline Engine, 4 Stroke Outboard Motor 6L Big Fuel Tank Up to 20 km/h 3600 RPM Single-Cylinder Trolling Motor for Foam Boats, Fishing Boats

  • 【Motor Parameters】Power: 15hp, single-cylinder, four-stroke, general gasoline fishing engine.
  • Fuel tank capacity: 6L,Engine oil volume: 1.16L.
  • 【Structural Design】 The gasoline engine has a unique and ingenious design. It uses the structure of the gasoline engine to directly drive the propeller, eliminating the need for complex mechanisms such as clutches and transmissions, making the product structure very simple and practical. Both the frame and the armrest adopt excellent pipe design, simple structure, light and portable.
  • 【Strong Power】15 horsepower single-cylinder four-stroke general-purpose gasoline engine is adopted. The power of the fishing boat engine directly drives the propeller to rotate at a high speed through the coupling drive shaft, generating power to propel the boat forward at a speed of up to 20 km/h.
  • 【Easy to Install】the fishing boat motor is very simple to install and use, and it only needs to be mastered and operated in a short time. Just fix the base on the stern, insert the frame into the base, and adjust the propeller draft at the same time to start the gasoline engine. By moving the handrails u....
Check Stock

Seaworks Boat Winterizer Gravity Motor Cleaning Kit - Gravity Flow System DIY Winter Preparation Solution for Marine Engines - For Inboard and Outboard Engines

  • Seaworks Boat Winterizer flow system flushes, prepares and protects your boat engine for winter storage. Compatible for inboard and outboard engines..
  • Kit includes: antifreeze tank with on/off valve, T-Connector, shutoff valve, braided hose with fittings..
  • Fittings designed for uninterrupted antifreeze flow to your engines, cleans impurities and enhances engine performance. Use at regular intervals to improve engine life expectancy..
  • Antifreeze(not included) and flusher (not included) required to operate kit, 5-gallons of compatible antifreeze required for boat winterization. Do not use an antifreeze with a burst protection level of less than -50°F..
  • For front engine mounted raw water pumps (including most Volvos and inboards) a Front Engine Pump adapter (not included) is needed to connect directly to the suction side of the raw water pump. Do not attempt to to connect directly to the suction side of the raw water pump. Do not attempt to winterize a front engine mounted raw water pump system using this method..
Check Stock

GAOLEI 323CC Outboard Motor Boat Engine, 4 Stroke 20 HP Heavy Duty Outboard Motor Marine Inflatable Fish Boat Engine with Water Cooling System CDI Ignition(Black)

  • ...ear shifting. Twist grip throttle handle and engine stop button for improving response and saving time..
  • [Durability]Vertically installed engine design can improve power, performance, Superior outboard anti corrosion system and anodes for increased durability. Durable cast aluminum construction for superior corrosion protection, suitable for both freshwater and saltwater..
  • [Applications and Service]Perfect match for inflatable boats, fishing boats, sailing boats, kayaks and small yachts. Better performance, faster starting, and the motor can be positioned at multiple angles.Application field: used in fishery, aquaculture, outdoor adventure, etc..
Check Stock

Seaworks Boat Winterizer Gravity Motor Cleaner with Flusher Kit - Gravity Flow System DIY Winter Preparation Solution for Marine Engines - For Inboard and Outboard Engines

  • Seaworks Boat Winterizer flow system flushes, prepares and protects your boat engine for winter storage. Compatible for inboard and outboard engines. Flusher included with kit..
  • Kit includes: antifreeze tank with on/off valve, T-Connector, shutoff valve, braided hose with fittings, flusher..
  • Fittings designed for uninterrupted antifreeze flow to your engines, cleans impurities and enhances engine performance. Use at regular intervals to improve engine life expectancy..
  • Antifreeze(not included) and flusher (included) required to operate kit, 5-gallons of compatible antifreeze required for boat winterization. Do not use an antifreeze with a burst protection level of less than -50°F..
  • For front engine mounted raw water pumps (including most Volvos and inboards) a Front Engine Pump adapter (not included) is needed to connect directly to the suction side of the raw water pump. Do not attempt to to connect directly to the suction side of the raw water pump. Do not attempt to winterize a front engine mounted raw water pump system using this method..
Check Stock

Redneck Convent Dual Water Feed Boat Motor Flusher Rectangular Cup Muffs with Hose Fittings Flush Kit – Marine Outboard Engine Flushing

  • ULTIMATE DUAL FEED FLUSHER: Use the Redneck Convent Dual Water Feed Boat Motor Flusher Rectangular Cup Muffs with Hose Fittings Flush Kit – Marine Outboard Engine Flushing to obliterate salt and mineral build up along with other contaminants from your outboard boat engine’s lower unit cooling system when hooked up to a garden hose.
  • Effective way to flush engine with fresh water to prevent clogging and corrosion and allow for engine adjustments.
  • EASY INSTALLATION: Requires no tools for installation or removal.
  • Simply slide the flusher muff cups over the top of the water intake slots on your boat and connect your garden hose to one of the included quick connect fittings to run motor out of the water or use to winterize motor.
  • Never turn water supply to full force or damage to drive may occur.
  • FITS YOUR BOAT: Compatible with most Johnson/Evinrude, Mercury, Yamaha, Chrysler, Force, Honda, Nissan, Suzuki, and Tohatsu outdrives.
  • As long as your boat includes side water inlet ports, this flusher is for you.
  • Rotate muff ears to fit and seal over the water pick-ups on the lower unit (cups swivel to be positioned horizontally or vertically for a multitude of ways to put it on).
  • NO LEAKAGE: Inferior round cups do not always fit correctly over intake ports, but....
Check Stock

FORMA MARINE Boat Chairs High Back Green Deck Folding Marine Aluminum Teak Furniture Set of 2 M150GR

  • Folds Flat to 4.7 “, 8 lbs in weight . Easy to carry around and stow away . Smooth anti-skid leg tips tips do not mark boat decks. Protective storage bags available on demand..
  • Delivered after 9 days from Greece. The factory specializes in Alumunum Boat Chairs since 1978 and offers high quality customer service both before and after sales..
  • Recacryl Fabrics are washable and easy to clean. New color replacement fabrics can be supplied! Spares for all warn parts available, making your chairs always look like new..
  • 23″ high back, the most comfortable boat chair on the market. The Elastic cords absorb the vibrations from the engine and the rough sea waves. Smouth and warm Rounded Iroko or Teak oiled Armrests..
  • 1″ Anodized Aluminum tube, Stainless Steel Hardware, Aviation Grade Rivets. Sturdy Durable Corrosive Resistant Construction to withstand the harsh sea environment..
Check Stock