Top Aluminum Die Cast Enclosure Reviews

Chefman, Slow Cooker with Die-Cast Insert, Stainless Steel

Brown – Sauté vegetables and brown meat directly on the stovetop before slow cooking for greater depth of flavor.
Bake – the nonstick, die-cast aluminum insert can be used for oven roasting or stovetop searing.
Slow – slow cook for a wide range of family favorites like chili, soups, stews and more.
Brushed stainless steel housing and die-cast aluminum insert.

Check Stock

2 Inch Car Speaker Tweeter - Heavy Duty 700 Watt High Power Super Titanium Audio Tweeter System w/ Die Cast Aluminum Frame, 2kHz-25 kHz Frequency, 112 dB, 4-8 Ohm, Crossover Capacitor - Pyle PDBT78

...red audio projection tweeter system has a maximum power output of 700-watt peak power / 350 watt RMS so you can play your favorite tracks as loud as you want and with style.
2kHz - 25 kHz FREQUENCY RESPONSE: This car tweeter speaker has a frequency response of 2kHz - 25 kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction.
4-8 OHM IMPEDANCE: This car tweeter has 112dB/w/m sensitivity and 4-8 ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
2” KAPTON VOICE COIL: Pyle Pro follows the standard size for most car stereo systems and created this 2 inches super titanium car audio tweeter speaker with 2” high-temperature Kapton voice coil. Additional feature includes mylar crossover capacitor.
20 OZ MAGNET: This tweeter has a 20 oz magnet structure w/ heavy-duty housing that provides a strong foundation. Also, feature a diamond chrome cutting finish & die-cast aluminum frame. Easy to install to your vehicle’s sound system w/ 3” mounting depth.

Check Stock

Timpano Horn Driver TPT-DH175 150W 1\ Ferrite Compression Horn Driver 8 Ohm (Single)

Speaker size: 3.75" Type: Super Horn Tweeter Peak power: 600 Watts Tweeter composition: Aluminum dome.
Tweeter size: 3.75" Impedance: 8 ohms Sensitivity: 99 dB Frequency response: 2000 Hz - 20000 Hz.
System: Tweeter Protection: Aluminum frame Voil coil: Aluminum Composition: Die cast aluminum.
Tweeter design: Titanium super tweeter Mounting depth: 1" Diameter: 3.75".
Die cast aluminum frame Tweeters are made from durable materials Spade tweeter terminals for easy installations.

Check Stock

Victrix Pro FS Arcade Fight Stick Game Fighting Joystick Controller Black - PS5/PS4

PERFORMANCE The Pro FS is built from the ground up to deliver the fastest response time achievable (5ms)..
COMFORT From the precise angle of the slope for the wrists to the exact weight to the thickness and the chemical composition of the non-slip pads....
the first of its kind, its full metal enclosure fight stick is made by extruding aircraft grade aluminum into its....
ACCESS Pro FS allows complete control and customization. A large bottom door opens wide to give you access to updates, swaps, and all the eccentric....
A STICK WELL TRAVELLED We built handles, die cast metal shoulder strap attachments, cable organizers and we included a removable stick that stores....

Check Stock

K2 Skate F.I.T. 90 Boa Inline Skate

Boa system- tightens or loosens the boot with a twist of a knob.
Die-cast aluminum frame- responsive and stiff die cast aluminum for acceleration, speed and control..
High-performance wheels - 90mm wheels and ILQ 7 bearings are great for safe speed with the right amount of spin.
Stability plus cuff- provides the right amount of support, flexibility, reliability and comfort to have a good time.

Check Stock

Sundown Audio U-10 D2 10' 1500W RMS Dual 2-Ohm U-Series Subwoofer

Features: Black Aluminum 3” voice coil former for superior heat dissipation, High Temperature Round-Wire CCAW voice coil with high-temp black adhesive, Double stitched surround, Heavy duty cast basket, Spring loaded terminals accept up to 8 gauge, Stitched-on double-XL tinsel leads, Rear vented pole piece, Rear drilled gap-venting, Innovative high-velocity cast aluminum vented frame spacer ring, Magnet ID shorting ring, Top-Plate Cooling Channels, Cast Aluminum surround bolt-on rings, Optimized.
Specifications: 1500 Watts RMS | Linear X-Max by 70% | Magnet Diameter: 8.66 in. | DC Resistance (Re): 3.8 Ω | Resonance Frequency (Fs): 48.5 Hz | Equivalent Volume (Vas): 8.3 L | Electrical Q Factor (Qes): 0.35 | Mechanical Q Factor (Qms): 3.20 | Total Q Factor (Qts): 0.32 | Force Factor (BL): 26.8 NA | Moving Mass (incl. Air Load) (Mms): 216.3 g | Suspension Compliance (Cms): 0.05 mm/N | Sensitivity: 86.2 dB 1w / 1m.
Box Recommendations: Sealed Enclosure Suggestion: 0.5 cu. ft. | Ported Enclosure Suggestion: 1.0 cu. ft. | Displacement: 0.21 cu. ft. | Depth: 7.007 in |Outside Diameter: 10.94 in | Cutout: 9.17 in | Recommended Tuning: 32 Hz | Recommended Port Area: 16 sq. in..

Check Stock

K2 Skate F.I.T. 90 Boa, 10

BOA System - Tightens or loosens the boot with a twist of a knob.
Stability Plus Cuff - Provides the right amount of support, flexibility, reliability and comfort to have a good time.
Die-Cast Aluminum Frame - Responsive and stiff die cast aluminum for acceleration, speed and control..
ILQ 7 Bearings - A classic inline skate bearing that has a 608 standard hub and will allow you to skate just a little bit faster than you are used to..

Check Stock

K2 Skate Alexis 90 Boa, 8

BOA System - Tightens or loosens the boot with a twist of a knob.
Stability Plus Cuff - Provides the right amount of support, flexibility, reliability and comfort to have a good time.
Die-Cast Aluminum Frame - Responsive and stiff die cast aluminum for acceleration, speed and control..
ILQ 7 Bearings - A classic inline skate bearing that has a 608 standard hub and will allow you to skate just a little bit faster than you are used to..

Check Stock

J-4000 Jiffy Garment Steamer with Plastic Steam Head 120 Volt

The machine offers durable die cast aluminum outer shell so your device will have a longer life.
The Garment Steamer will provide steam within 2 minutes after reaching the preheated temp to help keep your garments fresh and wrinkle free.

Check Stock

K2 Skate Alexis 90 BOA, Black_Burgundy, 9.5

BOA System- Tightens or loosens the boot with a twist of a knob.
Die-Cast Aluminum Frame- Responsive and stiff die cast aluminum for acceleration, speed and control..
High-performance wheels - 90mm wheels and ILQ 7 bearings are great for safe speed with the right amount of spin.
Stability Plus Cuff- Provides the right amount of support, flexibility, reliability and comfort to have a good time.

Check Stock

Power Acoustik MOFOS-12D2 12" Dual 2 Ω 1200W RMS Subwoofer, Black

2.5" Dual 4-Ohm 4-Layer Voice Coil, Royal Blue Finish with Diamond Cut Accents, Die Cast Aluminum Voice Coil Heatsink.
Non-Pressed Pulp Cone, Polyether Foam Surround. RMS power handling: 1,500, efficiency (1w/1m): 85.40.
Nickel Plated 8ga Compression Wire Terminals, Dual Poly-Cotton Spiders, Die-Cast Aluminum Frame, Vented Pole Piece.

Check Stock

Power Acoustik MOFO-154X MOFO 15-Inch Dual 4-Ohm VC 3000 Watt Pro Subwoofer, Standard Packaging

2.5" Dual 4-Ohm 4-Layer Voice Coil, Royal Blue Finish with Diamond Cut Accents, Die Cast Aluminum Voice Coil Heatsink.
Non-Pressed Pulp Cone, Polyether Foam Surround.
Nickel Plated 8ga Compression Wire Terminals, Dual Poly-Cotton Spiders, Die-Cast Aluminum Frame, Vented Pole Piece.

Check Stock

Marshalltown Straight Tile Nipper

MARSHALLTOWN Straight tile nippers are great for small, curved or irregular nipping of ceramic or porcelain tiles..
The adjustment knob controls how far nippers open, with stops for closed, 1/4 Inch tile, 1/2 Inch tile and fully open, to help reduce hand fatigue..
All MARSHALLTOWN Tile Nippers and Cutters have pre-set locking capabilities, a durable die-cast aluminum body, replaceable tungsten-carbide tips/wheels, and comfortable DuraSoft handles..
The Wheeled Nippers include Replaceable, tungsten-carbide tips and wheels, Internal torsion springs that help prevent damaged or lost springs and an Aluminum die cast body that provides lightweight durability..

Check Stock