Top Aluminum Coil Embossing Reviews

NVX VSW84v2 8 inch VS-Series Car Audio Subwoofer - Dual 4 Ohm Voice Coil 500 Watts Peak & 250 Watts RMS

8" VS-Series Version Two Car Subwoofer with a 4 Ohm Dual Voice Coil.
Power Handling: 250 watts RMS - 500 watts Peak | Sensitivity: 85 dB (1W/M) | Resonance Frequency (Fs): 36 Hz | Frequency Response: 20 - 200 Hz.
2.5” Aluminum Voice Coil: Each of our subwoofers is equipped with a 2.5” aluminum voice coil, providing maximum current distribution throughout....
Accurate Hard-Hitting Bass: The VS-Series subwoofers pack a massive punch when it comes to bass output. Our subwoofers are designed with a non-pressed....
Aluminum Shorting Ring: What makes our subwoofers stand out from other subwoofers on the market is the aluminum shorting ring. The ring is a....

...in high output amplifier & RCA/speaker line input.
RUBBER EDGE SUSPENSION: The high-performance car woofer speaker has a specially treated black rubber edge suspension that completes your woofer enclosure system. Total size measures 10.4” H x 20” W x 9.6” D. Also features blue LED light behind the grill.
1.5” ALUMINUM VOICE COIL: This car speaker has a 1.5” aluminum voice coil with a 4-ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound.
BLUE POLYPROPYLENE CONE: Pyle follows the standard size for most car stereo systems & created this 8" high power 4-ohm subwoofer w/ blue polypropylene cone perfect for new speaker construction, replacing worn or blown speakers.
35Hz - 800Hz FREQUENCY: The 1.5” aluminum voice coil provides the punch, while the bass reflex vent adds even more sub-bass, ultimately achieving a frequency response of 35 Hz to 800 Hz. It is also super easy to install to your vehicle's sound system.
One 8'' High Power 4 Ohm Subwoofer - 1.5'' Aluminum Voice Coil.
Built-In High Output Amplifier - Bass Reflex Vent for Added Sub-Bass Response.
Blue LED Light Behind The Grill - 250 Watts Max Power Handling.
Blue Polypropylene Cone - RCA/Speaker Line....

Features and Specifications: Vented cast aluminum basket, Fiberglass reinforced cone, Stitched foam surround, Heat dissipating aluminum heat sink, 4-layer copper 2" voice coil, DVVC (Direct Vent Voice Coil) Cooling, Size: 8", 900W RMS Power | 1800W Peak Power. Sensitivity: 82 dB, Magnet Size: 105 oz, Mounting Depth: 5.75", Cut Out Diameter: 7.32", and Voice Coil Diameter: 2"..

EMBOSSING POWDERS - 8x 10ml embossing powders. Colors include blue, silver, black, gold, white, pearl, red, bronze..
EMBOSSING INK PAD - 3x2" clear embossing pad. Foam pad is acid free. Ink stays wet for longer time..
EMBOSSING PEN - Clear embossing pen. Pen contains a specially formulated ink that stays wet on paper, providing the tack needed to attract and retain embossing powders until they are cured with heat. Perfect for scrapbooking, rubber stamping, paper crafting, and even altered arts..
EMBOSSING STARTER KIT - This is the perfect embossing starter set for any artist. It includes the embossing powders, embossing pen and embossing pad that you need to get started..

Features: Pair Rockville X6.5C Competition 6.5" 1000 Watt Component Car Audio Speakers and Titanium Tweeters, (2) 6.5 Woofers for Mids and Bass, (2) 2 Aluminum Tweeters with Titanium Diaphragms, (2) Audiophile Crossovers (these are very expensive crossovers with a lot of copper coils in them for advanced sound filtering to give you the best sound quality), Peak Power Rating: 1,000 Watts Per Pair/500 Watts Each, CEA Compliant RMS Rating: 250 Watts Per Pair/125 Watts Each.
Paper Woofer Cone With Cloth Edge Gives Amazing Bass and Mids, True Aluminum Bullet to give the woofer amazing sound, Steel Stamped Basket, Oversized 1.5 ASV Voice Coil, 14 oz. High Quality Ferrite Magnet, Cutout Diameter: 5.78 inches, Impedance: 4 Ohms, Tweeter Size: 3.86' x 1.97 inches, Cutout Diameter of Tweeter: 2.80inches, Audiophile 2-Way Crossover with 12db/Octave Roll-Off, Crossover Has Tweeter Attenuation Adjustment of -3db, -6db, Frequency Response: 40Hz 20,000 Hz.
Sound Pressure Level: 90dB @ 1w/1m, Fs: 110 Hz, Re: 3.6 Ohm, Qes: 1.024, Qts: 0.865, Qms: 5.579, Titanium Diaphragm Tweeter with 1 Kapton Voice Coils - the most premium voice coils on the market, This item uses CCAW voice coil windings which is the most expensive and best material for voice coil winding, Pre-insta....

Features and Specifications: Vented cast aluminum basket, Fiberglass reinforced cone, Stitched foam surround, Heat dissipating aluminum heat sink, 4-layer copper 1.5″ voice coil, DVVC (Direct Vent Voice Coil) Cooling, Size: 6.5″. Power Handling: 700W RMS Power | 1400W Peak Power. Sensitivity: 82dB, Magnet Size: 80 oz, Mounting Depth: 5″, Cut Out Diameter: 5.95″, and Voice Coil Diameter: 1.5″..

[MATERIAL]: Made of aluminum mylar and PE laminated material.
[SURFACE TECHNOLOGY]: The surface is processed by diamond embossing process to provide uniform multi angle reflecting surface and eliminate hot spots in growing room by spreading/reflecting light more evenly.
[STRONG AND DURABLE]: Wear resistant, waterproof, anti-corrosion, anti-crease.
[LIGHT-TIGHT]: The diamond embossing surface reflects about 95% of the growth light, which makes the indoor light distribution uniform and more conducive to plant growth.
[THERMOSTABILITY]: Diamond embossed surface is easy to reduce indoor heat, ensure the stability of indoor temperature, so that more suitable for plant growth..

Sufficient quantity: there are 2 pieces of embossing pens in the package, measuring about 14 x 0.9 cm/ 5.5 x 0.39 inches, which can offer a wealth of creativity to get you crafting for your embossing techniques.
It's also a good idea to share them with your friends and family members.
Duel ended design: the embossing pens are designed with dual ends, including a bullet tip and a brush tip, which work well with embossing powders and pearls.
You can use the bullet tip for intricate patterns, and the brush tip for large patterns.
Easy to use: the embossing pens are simple and convenient to apply, and compatible with your writing habits.
You only need to draw your desired pictures, and add your choice of colorful embossing powders, bringing your creative ideas into reality.
Ideal for crafting: the embossing pens are made of quality PVC material, not easy to break or deform.
The ink can stay wet on paper and most surfaces, allowing working time to create your design and attract and retain embossing powders until they are cured with heat.
Wide applications: these embossing pens are ideal for watermark and tone on tone stamping, can be widely applied for drawing, scrapbooking, doodling, journaling, paper crafting, rubber stamping, spot embossing, altered arts, ....