Orion C12D4 12 woofers
- 4" Resin Coated Copper Voice Coil on an Aluminum Former.
Top Aluminum Coil Coated Reviews
Arc Audio XDi 12D4 12” 4 Ohm Subwoofer
- High-Temperature Black Anodized Copper Coated Aluminum Voice Coil.
- Linear Design For Improved Dynamics And SPL At Low And High Volumes.
Orion HCCA154 15" 4 Ohms Series HCCA Subwoofer Dual VC RMS Power Watts 2500 Black Coil
- 4" Resin Coated Copper Voice Coil on an Aluminum Former.
AudioPipe TXX-BDC4-10 10 Inch 1800 Watt High Performance Powerful 4 Ohm DVC Vehicle Car Sub Audio Subwoofer Speaker System, Black
- Hifonics BRUTUS subwoofer with dual 4 Ohm design delivers 3000 watts and features heavy gauge, powder-coated, aluminum die-cast basket..
- Vented aluminum former holds a 3" voice coil while allowing the heat to be exchanged. (Less heat means less distortion).
- Specialized Hifonics dual poly cotton spider with double centering allows the woofer to handle more power with minimum distortions..
- Hifonics heavy duty aluminum die-cast basket allows back venting, which exchanges heat with cool air, resulting in more power handling and increased reliability..
- Vented high energy motor assembly with dual 70oz magnets increases power handling and increases SPL..
Solary Induction Essential Coil Kit, 9Pcs Magnetic Induction Heater Coils for Rusty Bolt and Nut Removal
- 【Improve Durability】 This induction coil kit, reinforced heat stabilized thermoplastic housing provides for increased durability inside and out..
- 【Safety】These coils are insulated for your protection and also coated to resist abrasion, to ensure your safety, if the insulating layer is damaged, a new coil needs to be used..
- 【Reusable】 Each coil can resist overheating and premature wear，they are all durable enough to be used at least several hundred times..
- 【Prevent Oxidation】 All coils are coated to eliminate oxidation and guarantee contact, so that it can provide maximum working efficiency..
- 【Application】The induction heater coil used to remove rusty bolts, nuts, bearings and gears ect, easily and efficiently..
Set of 4 Ignition Coil Pack with Spark plugs Fit for Toyota Corolla Matrix Prius Scion IM Scion XD Lexus CT200H & More Replaces# UF-596, UF-619, 90919-02258, 90919-01275, 93501
- Is your vehicle consuming more gas than usual? Is the engine misfiring or hard to start? Your car's ignition coil may be telling you that something is wrong. The coil receives power from the battery and transmits it to the spark plugs, which ignite the fuel and make the engine run. If this part fails, the operation of the vehicle would be highly affected, so you must attack the problem in time to avoid costly consequences..
- 【IGNITION COIL PACK SET OF 4】: Part composed of a stainless steel sheet coated with high quality plastic. Its excellent qualities enable it to enhance its durability and reduce the possibility of engine misfiring. It has excellent mechanical stability and corrosion protection..
- 【SPARK PLUGS】: Iridium spark plug made of aluminum and porcelain. This part resists high temperatures, generates maximum ignition power, low emissions and high mileage. In addition, it improves engine performance and saves up to 20% fuel..
J2 Engineering Silver LN-T7-011-15-SL
- Compatible With Lexus LS400 (UCF10) 1990 1991 1992 1993 1994.
- Spring Rate (Front/Rear) : 12 kg/mm/8 kg/mm.
- 52mm Mono-Tube Steel Alloy Shock With 32 Levels of Damping Adjustment Corresponds to Daily Driving Scene To The Sunday Track.
- Performance Internal Piston With Koyo Japan 6204z Bearing Provides Smooth Stroke.
- Powder Coated CNC Machined Aluminum And Carbon Steel Accessories.
- Full 1 Year Limited Warranty From Date Of Purchase.
- Install By Experienced Professional Is Highly Recommended.
Car Eight Way Speaker System – Pro 6 x 9 Inch 500W 4 Ohm Mid Tweeter Component Audio Sound Speakers For Car Stereo w/ 120 Oz Magnet Structure, 3.55” Mount Depth Fits Standard OEM – Pyle PLG69.8 (Pair)
- ...mooth, loud & detailed sound. Additional features include 45-22KHz frequency and 3.55” mounting depth w/ yellow coated steel basket.
- 0.5” NEODYMIUM TWEETER: The non-fatiguing butyl rubber surround keeps your speakers secure & extends its life. Supported by 0.5” neodymium dome tweeter for sweet highs, high temp aluminum voice coil, 2” polymer cone midrange & 5 x super film tweeter.
- INSTALLATION HARDWARE INCLUDED: This pair of Pyle eight-way car speakers feature a strong capacitor for an excellent performance. It comes with custom grills, wires, and installation hardware for easy and hassle-free setup.
- Standard 6”x9” Size Fits OEM Locations – 5 x Super Film Tweeter – Rubber Magnet Cover – Mounting Depth: 3.55″.
- Yellow Color Poly Injected Cone – High Temperature Aluminum Voice Coil – Power Handling: 250 Watts RMS /500 Watts Peak.
- Non-Fatiguing Butyl Rubber Surround – Strong Capacitor for Excellent Performance – Frequency Response: 45-22KHz.
- 2” Polymer Cone Midrange – Yellow Coated Steel Basket – Impedance: 4 Ohms.
- 0.5” Neodymium Dome Tweeter – 120 oz. Magnet Structure – Includes Custom Grills, Wires and Installation Hardware.
BLUEFIRE J9802B 1/4lb Flux Cored Low Temperature Aluminium Brazing Coil All Purpose Welding Coil for Almost All Metals Soldering Propane Torch Universal Welding Rods flux Free
- ...lux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
- 【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
- 【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..
- 【Moistureproof】BLUEFIRE flux cored welding wire won't absorb water, so it can be stored in various environments for a long time. The special moisture-proof....
Power Acoustik 12" Woofer Dual 4 Ohm 2500W Max
- Overcompensating Motor Structure for Increased Magnetic Strength, 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics, Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up, Die-Cast Aluminum Heat Sink Dust Cap Absorbs Voice Coil Heat, Aluminum Dust Cap Fins Dissipate Heat & Strengthen Cone.
- Non-Magnetic Non-Resonate Die-Cast Aluminum Frame, 2.5” 4-Layer Voice Coil w/ Large Gauge Wire Increases Power, High-Temperature Tolerance Adhesives Resist Thermal Failure, Nickel Plated 8ga Spring-Loaded Compression Wire Terminals, Non-Transfer Spruce Pulp Cone w/ UV & Chemical Protection.
- High-Density Polyether Foam Surround w/ UV & Chemical Protection, Dual Poly-Cotton Suspension Dampen Violent Accelerations, Stitched Voice Coil Leads Prevent Potential Damage, 1-pc Gasket/Trim Ring w/ Concealed Mounting Holes Included.
- Efficiency (1w/1m): 86.50, Voice Coil Configuration: 2.50″ Dual 4Ω, Motor Volume: 254oz Re: 7.230Ω Fs: 28.60Hz Qes: 0.416 Qms: 4.722 Qts: 0.383 Diameter: 12”.
- Vas: 1.69ft3 Bl: 24.55tm Mms: 200.815g Cms: 152.013 Sen: 86.56db MAX Power: 2,500w RM....
Diamond Audio MP694 6 X 9 PRO Full-Range Co-Ax Horn Speaker
- Ferrite Strontium High Temp Magnet structure.
- 1.5” 4 Ohm – Single Layer High Temp Voice Coil with Black Coated Voice Coil former for Woofer.
- 1.0” 8 Ohm – Single Layer High Temp Voice Coil for Tweeter.
- Advanced Voice Coil Heat Sink Design for Better Heat Dissipation.
CERWIN VEGA PH694 6″ x 9″ 160W RMS/320W MAX PRO Full-Range Co-Ax Horn Speaker
- Ferrite Strontium High Temp Magnet Structure.
- 12dB 2nd Order Filter Crossover for better Protection of the Tweeter.
- Advanced Voice Coil Heat Sink Design for better Heat Dissipation.
- 1.5” Double Layer High Temp Voice Coil with Black Coated Voice Coil former for Woofer.
- 1.0” Single Layer High Temp Voice Coil with Voice Coil former for Tweeter.
3'/4' Drop Lowering Kit with Spindles For 1982-2004 Chevy S10 4CYL 2WD by TSS
- Compatible with 1982-2004 Chevy S10 2WD 4-CYLINDER.
- FRONT: MaxTrac 1" Drop Coil Springs, MaxTrac 2" Ductile Cast Iron Drop Spindles / Knuckles.
- REAR: 4" Aluminum Angled Drop Blocks, (4) Zinc Coated U-bolts.
- NOTE: 4X2 2WD model required. 4-CYLINDER model required.
- The Suspension Specialists is an American company with fast shipping, technical support available, and products you can count on. Please see our description for further details, or contact us for assistance.