Top Aluminum Cnc Cutting Parts Reviews

SainSmart Genmitsu 10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8' Shank

➤Cutting Edge Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.0mm), 10Pcs..
: ➤Advantage: With sufficient flexural strength and wear resistance, which ensure high work efficiency. Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches..
➤Material: Using ultra-fine grained carbide material, with good milling and cutting performance..
➤Application: PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts processing..
➤Genmitsu CNC Bits Selection Guide: To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..

Check Stock

Fstop Labs Replacement for DJI Phantom 3 Gimbal Yaw Arm + Gimbal Cable Kit in CNC Aluminum for Professional/Advanced / 4K

Compatible with Phantom 3 Professional, Advanced, 4K.
Includes gimbal ribbon cable, yaw arm, set screw, hex wrench.
Anodized Silver to match original partsDescriptionIntroducing our Aluminum direct replacement gimbal parts for the DJI Phantom 3 Professional, Advanced, and Standard. These are CNC-machined out of a solid block of 6061 aircraft-grade aluminum. Guaranteed OEM fitment and function..
CNC-machined from solid 6061 aircraft-grade aluminum Guaranteed.
Painted silver to match original DJI parts.
Yaw Arm + Roll Arm + Roll Arm Cover + Alignment Tool.
Tweezers (helps to manipulate ribbon cables and screws).

Check Stock

MISSYOUNG Double Sided Woodworking Tape 1 Inch x 82 Feet Two-Sided Woodworker Tape for Woodworking, CNC Work,Crafting, Wood Template Routing, Removable & Residue Free

...y adhered well to wooden parts. Cloth backing allows the double sided woodworker’s tape to resist curling, making it easy to manage, adhere and remove, shortening the preparation time and effort needed on each template..
APPLICABLE MATERIALS: Suitable to be used on wood, aluminum, steel, Peek, PMMA/plastic (not fiberboard), concrete, tile, marble and so on. This tape is thin but strong adhesive. Its intended purpose SPECIALLY is to fasten templates/jig to wood, plastic, aluminum and steel for marking and cutting. It needs to hold the template firmly, but still allow its release due to removable performance..
SIZE: 25mm Width, 82 Feet Length. Optimal thickness enables the double sided wood template tape to be applied and peeled off easily from the wood. Does not lift or chip off the wood’s surface, making it a perfect companion for woodworkers..

Check Stock

JessEm 07150 Mite-R-Excel II Miter Gauge

DESIGNED FOR ACCURATE CUTS: Mite-R-Excel II Miter Gauge features nine miter detents and a spring-loaded indexing pin to ensure accurate cuts at the most common angles.
ADJUSTABLE FLIP STOP: Features adjustable flip stop accommodates up to 3/4-inch thick sacrificial fence.
EXTENSION: Fence extends from 20 to 36 inches to accommodate larger work-pieces when cutting.
COMPATIBILITY: Fits standard 3/4 x 3/8-inch miter slot and features laser-engraved angle measurements for accuracy.
MATERIAL: CNC-machined anodized aluminum components and Swiss-turned stainless steel parts. The guide bar made from Sheffield steel.

Check Stock

Stay Home [Explicit]

THE WORLD’S FIRST WALL MOUNTED CNC MACHINE KIT: its upright design provides a huge cutting space - up to 32sq ft - on a tiny footprint. By eliminating the heavy and expensive components of traditional CNC milling machines, the M2 becomes a purpose-built, making machine without all the added fuss. It cuts sheets of nearly any material such as wood, metals, plastic and foam, so that you can craft anything you like. Projects made with our M2 include benches, signs, lamps, tables, and even a guitar!.
FULL KIT: M2 is a 3-Axis wall-mounted CNC cutting machine and comes with laser-cut, steel and powder coated mounting brackets, lead screw z-axis, built-in dust collection port, three ⅛‘’ router bits that offer extremely precise cuts. The router is not included. Compatible routers include: DeWalt611, Bosch Colt, Makita RT0700CX and EU equivalents to each of the above..
OPEN-SOURCE SOFTWARE: The M2 is designed to be used with Makerverse open-source software which is included with your purchase. Makerverse is a GRBL CNC control application that has custom controls made specifically for all Maker Made products: the Maslow, M2 and 300x. The application is derived from the open source CNCjs project and will continue to receive new features and updates f....

Check Stock

EANOSIC 30 Degree V Groove Router Bit 1/4 Inch Shank, Nano Blue Coated Solid Carbide V Router Bit for CNC Engraving and Carving

INDUSTRIAL GRADE CNC Engraving Bit: Shank: 1/4”.
SOLID CARBIDE AND NANO BLUE COATED: The 30 degree v groove router bit is made of solid carbide. And nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches..
SUPER LONG LIF The nano new design coating could provide up to 2.5X normal life and a much more smooth cutting edge than uncoated bits..
These are mainly used for engraving machine and CNC machine. A power tool for 2D sculpture, 3D sculpture. perfect for Signmaking, CNC Lettering, V Groove Engraving Artwork & Miter Fold Router Bits..
The CNC Engraving Bit used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic, aluminum and etc..

Check Stock

10Pcs Nano Blue Coat End Mill CNC Router Bits,End Mill Rotary Burrs Engraving Machine Drilling Hole Tool for PCB Mould Plastic Fiber Carbon Fiber Hard Woo,1.5-3.175mm, 1/8\ Shank

★Cutting Edge Diameter: 1.5-3.175mm (1.5/1.6/1.7/1.8/2.0/2.2/2.4/2.5/3.0/3.175mm),10Pcs 1 set meet different needs.
★High Efficiency: Carbide end mill engraving bits features of the good milling and cutting performance, Excellent cutting results to ensure high work efficiency.
★Wide Application: Suitable for PCB, CNC, carbon fiber, hard wood, Mold, plastic fiber, printed circuit board, and other precision parts processing - carving, cutting, engraving, milling, boring, routing, slotting. processing to drill hole and polish smooth surface.
★Hard Steel Material: This 10 PCS 1.5-3.175mm carbide cnc router bits set is made of good grain carbide material, ultra hardness & wear resistance, sufficient strength, not easy to break to ensure longer using.
★Perfect Cutting: All the cnc bits have sharp cutting edge, milling, hole and plate edge with the surface clean, neat and no glitches.
Fast chip-removal speed leaves an unobstructed path for the end mill.

Check Stock

Lathe Grooving Blade, Lathe Turning Inserts CNC Grooving Cutting Tool (MGMN 150-PCD)

MULTIPLE USES: lathe Grooving Inserts can meet a variety of cutting requirements, such as cutting aluminum, copper and its cemented carbide, non-ferrous metals and some non-metals..
MATERIAL: CNC lathe Grooving Inserts are made of high-quality diamond materials, with high hardness, high impact resistance, high heat resistance, etc. The Grooving Inserts is not easy to break ..
SERVICE LIFE: Due to the high wear resistance and durability of lathe Grooving Inserts, its service life is longer than that of grooved inserts made of general materials, and it is more cost-effective..
PRODUCT DESIGN: CNC lathe Grooving Inserts adopts a reasonable and professional design, and the size is also very standard, so the product is stable and reliable in the processing process and has good processing performance..
QUALITY ASSURANCE: lathe Grooving Inserts are manufactured through strict standard procedures, and the product quality is qualified. If you have any after-sales problems, please contact customer service and we will deal with it in time..

Check Stock

JW Winco A8330221 B10 V8 AN605 PHOTOCELL CLAMP Plastic

Application: Used for building industrial aluminum frame structure, 3D printer, CNC router, CNC cutting machine, etc..
Easy to Install and Use: The end cover is easy to install and use, and can be easily fixed with screws.
Aluminum Alloy: The end cover made of high quality aluminum alloy, the surface is anodized, and will not fade.
Elaborate Production: Elaborate processing, this 8080 double slot end caps is beautiful and top grade.
Professional Uses: This is 8080 double grooves end caps, which for profiles end caps.

Check Stock

Linear Rail SBR12 1000mm 12mm CNC 2PCS Linear Rail Slide Guide Shaft 4PCS SBR12UU Bearing Blocks for Automated Machines and Equipments

LINEAR RAIL KITS: 2 pieces of linear rail 1000 mm/39.37" long rail shafts and 4 Pieces SBR12UU blocks. Sliding blocks to be used cooperatively with rails..
EASY TO INSTALL: Aluminum support rail with pre-drilled holes for ease of mounting.Suits X, Y, Z axis..
ADVANTAGE: Premier Linear Guiding System.The support rail unit provides maximum rigidity and stiffness to the shaft throughout the whole stroke, and ensure the performance of the unit..
HIGH-QUALITY STEEL MATERIAL: CNC parts linear rails are made of carbon steel, linear bearings are made of quality bearing steel with aluminum alloy housing. Surface chrome plating treatment makes it anti-rust, durable, and extremely hard..
WIDELY USED: It is widely used in linear motion system. Such as, punch, tool grinding machine, automatic cutting machine, printer, card sorting machine, food packing machine, other sliding parts on industrial machinery..

Check Stock

4Pcs Tapered Ball Nose End Mill 0.25MM-1MM with 0.5MM Tip Diameter CNC Router Bits Set 2D 3D Woodworking Tool 2 Flute CNC Router Bits

【High Quality】The end mills are made of ultra-fine tungsten carbide steel alloy, its nano black coating/titanium coating with high hardness and heat resistance..
【End Mill Bits Set】4Pc【End Mill Set】4Pcs ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs.s ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs..
【Parameter】Ball raidus 0.25mm, 0.5mm, 0.75mm, 0.1mm, flute length:15MM, overall length 1.5 inch, single side angle 5.12°..
【Wide Compatibility】Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing,they are compatible with most desktop CNC machines..
【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing..

Check Stock

Fiber Cutter Stable Performance High Automatic Blade Return Lightweight Fiber Cutter (Orange)

Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do term use..
Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..

Check Stock

2Pcs Nut Bracket DSG20H Aluminum Alloy Ball Nut Bracket 10-Fixing-Hole Housing Nut Holder for SFU2005 / SFU2010

ALUMINUM ALLOY-- The ball screw nut bracket is made of high-quality aluminum alloy material, which is durable and securely locked..
APPLICATION-- This ball screw nut bracket is suitable for SFU2005 / SFU2010 ball nut, convenient to install and use..
WIDE APPLICATION-- Wide range of application helps ball nut bracket suitable for lathes, grinders, milling machines, drilling machines, comprehensive processing machines and EDM machines..
USED FOR-- CNC ball parts can be fit for boring machines, wire cutting machines, accuracy measuring instruments, woodworking machinery, loading and unloading machines and transportation equipment..
GOOD REPLACEMENT-- Screw nut bracket can replace your old or broken one, its high quality can keep its high performance for a long time..

Check Stock