Top Aluminum Alloy Heatsink Reviews

EZDIY-FAB M.2 SSD heatsink 2280, Double-Sided Heat Sink, High Performance SSD Radiator for PC / PS5 for PCIE NVME M.2 SSD or SATA M.2 SSD- Black

  • Aluminum Alloy Heatsink with the most heat dissipation designed specially for 1x M.2 SSD 2280 DIY Desktop PC SSD.
  • Aluminum alloy-Groove design, Double-sided cooling design greatly increase the heat dissipation area, with 10°C - 30°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling, improving the performance of your computer..
  • Specially designed for desktop computers, this M.2 SSD heatsink compatible with M.2 2280 SSD, perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc..
  • The use of high-coefficient phase change thermal silicon wafers greatly improves thermal conductivity. Long-term use of phase change materials, thermal conductivity will be better..
  • EZDIY-FAB Heatsink is designed to be installed and removed fast and easily.
Check Stock

Geekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard

  • ✔Geekworm design 12mm aluminum alloy heatsink for Raspberry Pi Compute Module 4 CM4.
  • User manual, refer to Geekworm WiKi search C235..
  • ✔Heatsink dimensions: 54x39x12mm/2.12x1.53x0.47inch.
  • ✔Support install 30mm (3007 or 3010) cooling fan above the heatsink for better heat dissaption.
  • ✔With one piece thermal pad, need to cut proper thermal pad to attach on the CPU of Raspberry Pi Compute Module 4.
  • ✔The C235 heatsink reserve the space to connect the extermal antenna for CM4. ✔The inclcuded PM2.5x16mm screws length is just for install CM4 module and C235 heatsink, no support CM4 IO board..
Check Stock

Marsauto H4 Led Headlight Bulbs Conversion Kit

  • New csp led chips and high efficient silent fan, 6000k white color.
  • Plug and play, all in one conversion kit, easily installed in 20 mins.
  • Aluminum alloy shell, efficient silent fan.
  • Aluminum alloy, unique heatsink high fficiency silent fan complete the whole cooling system.
  • 360 degrees beam angle, no dark spot or shaded area, the same light theory as the stock lamp.
Check Stock

NVMe M.2 Aluminum Heatsink Cooler for 2280 M2 SSD Heat Sink with Silicone Thermal Pad red

  • ★ Passive heatsink for one or dual side(chips on both side) NVME M.2 SSD, fit for 22x80mm M.2 NVME SSD or SATA M.2 SSD..
  • ★Heatsink Design: Groove design, greatly increase the heat dissipation area. Aluminum alloy material, plating, anodic oxidation surface treatment..
  • ★M.2 SSD Heatsink size: 3 x 0.95 x 0.4in. (76 x 23 x 10mm), net weight: 0.9oz / 25g..
  • ): Unique Nano silicone thermal pad. Soft and good ductility, compatible with uneven surfaces.
  • ★Installation: fixed by 6 screws on two side, adjustable height for kinds of M.2 SSD..
Check Stock

Easycargo 124pcs Heatsink Kit 9 Sizes Multicolor Aluminum Copper + 3M 8810 Thermal Conductive Adhesive Tape, Cooler Heat Sink Cooling VRM VRAM CPU GPU Small IC Laptop Raspberry Pi 4 SSD NVMe M.2 PS5

  • Universal Heatsink Assortment Box,124pcs Multicolor in 9 different size + Pre-applied 3M 8810 Thermal Conductive Adhesive Tape..
  • Variety Aluminum and Copper heat sinks for cooling raspberry pi 4, VRM VRAM RAM CPU GPU MOSFET Small IC Chips PC Components Laptop M2 M.2 SSD NVMe PS5.
  • Includes: 8pcs black anodized aluminum heatsink: 0.56 x 0.56 x 0.26 inch (14mm x 14mm x 7mm).
  • 8pcs green anodized aluminum heatsink: 0.56 x 0.56 x 0.30 inch (14mm x 14mm x 8mm).
  • 8pcs silvertone aluminum heatsink: 0.6 x 0.6 x 0.25 inch (15mm x 15mm x 6.5mm).
  • 8pcs silvertone aluminum heatsink: 0.56 x 0.56 x 0.21 inch (14mm x 14mm x 5.5mm) (L*W*H)..
  • Includes: 16pcs black anodized aluminum heatsink: 0.56 x 0.4 x 0.26 inch (14mm x 10mm x 7mm) (L*W*H).
  • 16pcs silvertone aluminum heatsink: 0.56 x 0.4 x 0.21 inch (14mm x 10mm x 5.5mm) (L*W*H)..
  • Includes: 20pcs black anodized aluminum small heatsink: 0.35 x 0.35 x 0.19 inch (9mm x 9mm x 5mm).
  • 20pcs silvertone aluminum small heatsink: 0.35 x 0.35 x 0.19 inch (9mm x 9mm x 5mm).
  • 20pcs low profile copper pad shim heat sink: 0.59 x 0.59 x 0.02 inch (15mm x 15mm x 0.5mm) (L*W*H)..
Check Stock

EZDIY-FAB PS5 M.2 NVMe SSD Heatsink Cover for Expansion Slot, Aluminum Fin Cooler for Playstation 5 SSD NVMe M.2 PCIe 4.0 Storage- Black

  • Gen4 NVME SSD is a heat-generating monster when operating, EZDIY-FAB heatsink directly touches the hot spot to cool down quickly, maintain endurance and optimize performance.
  • Specifically designed for PS5 Console, made from High-Quality aluminum and precision CNC machining, it fits PS5 expansion slot perfectly and simplify installation..
  • The heatsink is compatible with any standard NVMe M.2 SSD. Fully tested with most of PCIe 4.0 SSD. It supports 2230, 2242, 2260, 2280 form factors. NOTE: The SSD maker’s thin heatsink should be removed before installing..
  • Features with the plate-fin design of aluminum alloy, perfectly matched with the built-in blast fan of PS5, and the heat is quickly conducted by aerodynamics..
  • Comes with an installation guide as well as thermal pads and screw driver for easy convenient installation..
Check Stock

NVMe M.2 SSD Cooler Heatsinks with 20mm Fan Powerful Cooling…

  • Compatible with PCIe NGFF NVMe Key-M Key-B M.2 SSD Size: 0.87 x 3.15in. (22 x 80mm), fits for 850 EVO, 860 EVO, 960 EVO, 950 PRO, 960 PRO, etc..
  • 20x20 FAN: 10000 rpm high-perfermance fan, low noise and no vibration, with 10°C - 30°C cooling effect (Varies depending on the environments).
  • 5V Power Supply: 15PIN SATA Power interface, 1W power consumption..
  • Heatsink Design: Groove design, greatly increase the heat dissipation area. Aluminum alloy material, silver plating, anodic oxidation surface treatment. M.2 SSD Heatsink size: 0.94 x 2.95 x 0.24in. (24 x 75 x 6mm), net weight: 0.78oz / 22g. Thermal conductivity of the heatsink: 560W/mK, minimum installation height requirement: 10mm, ONLY FIT FOR DESKTOP.
  • Unique Nano silicone thermal pad. Soft and good ductility, compatible with uneven surfaces.
  • Low viscosity, no damage to the M.2 SSD warranty label..
Check Stock

Advancing Gene M.2 NVMe Heatsink for PS5 Console, Black

  • ...his M.2 SSD cover heatsink is specially designed for PS5 console's SSD expansion slot, unique slim tail design will not affect the installation of the PS5 plastic cover. It can perfectly replace the original PS5 SSD expansion slot cover..
  • ✅[Premium Material Used] - Made from expensive Aviation Grade Magnesium Aluminum Alloy, anodic oxidation, fine workmanship. It not only has high hardness and light weight, but also has better heat dissipation effect, which is completely different from those cheap PS5 heatsinks. In addition, it is also equipped with extended screw and corresponding screwdriver, stable installation, to ensure that it will not fall off..
  • ✅[Optimized Heat Dissipation Design] - Different from other closed designs, we adopted unique surface cooling slot + through-hole design to allow heat from the SSD card slot to dissipate out. With the help of PS5's built-in fan, air circulation can be accelerated to maximize heat dissipation affect..
  • ✅[Quick and Easy Installation] - Advancing Gene heatsink for the PS5 console compatible with all kinds of M.2 NVMe SSD and easy to install: >> 1. Use the screwdriver remove the original SSD cover plate of PS5.
  • >> 2. Use the extended screw enclosed to fix the new heatsink for PS5..
Check Stock

ineo Aluminum M.2 2280 SSD Heatsinks with 20mm Fan and Pure Cooper Strip for M.2 NVME SSD [C2600 Fan]

  • 20x20 FAN: 10000 rpm high-perfermance fan, low noise and no vibration, with 8°C - 25°C cooling effect (Varies depending on the environments), very suitable for game players..
  • Compatible with PCIe NGFF NVMe M.2 SSD Size.
  • 8 x 0.8mm small square): Unique Nano silicone thermal pad. Soft and good ductility, compatible with uneven surfaces.
  • Low viscosity, no damage to the M.2 SSD warranty label..
  • Heatsink Design: Groove design, greatly increase the heat dissipation area. Aluminum alloy material, silver plating, anodic oxidation surface treatment. M.2 SSD Heatsink size: 0.94 x 2.95 x 0.24in. (24 x 75 x 6mm), net weight: 0.78oz / 22g. Thermal conductivity of the heatsink: 560W/mK, minimum installation height requirement: 10mm, ONLY FIT FOR DESKTOP.
Check Stock

QIVYNSRY M.2 Heatsink NVMe 2280 PS5 SSD Heat Sink Computer PC PCIE M2 SSD Cooler for Samsung 980 970 EVO Plus SN850 SN750 SN570 Firecuda 530, Black

  • 【Good Cooling Effects for Upgrade Your Computer PS5 with M.2 NVME NGFF Disk】- Specially designed for new M.2 M key or B key disks, this M.2 SSD heatsink is perfectly work with M.2 2280 SSD, fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, 980 PRO, SN850 SN750 SN570, Firecuda 530, Crucial P2 Crucial P5 Plus, etc..
  • 【Easy to Install and Operate】 - With double-sided clip design, 6 adjustable height screws, and 2 spare screws are suitable for M.2 NVME SSD of various heights, stable installation, better protection of your M.2 SSD with good heat dissipation performance for PC / Play Station 5..
  • 【Three Nano Thermal Pads】- Made from Nano Silicon Grease Material, with good thermal conductivity ability. Soft enough and good ductility, compatible with uneven surfaces of the M.2 SSD. Low viscosity, with no damage to the M.2 SSD..
  • 【Aluminum Alloy Material】- Aluminum alloy, silver plating , anodic oxidation surface treatment.
  • Greatly increase the heat dissipation area of M.2 storage disk, with 10°C - 30°C cooling effect..
  • 【Small and Light Weight】- Dimensions: 3 x 0.95 x 0.4in, net weight: 1oz. What You Get:QIVYNSRY M.2 heatsink SSD cooler, 18-month warranty and lifetime friendly customer service..
Check Stock

uxcell 20mm x 15mm x 10mm TO-220 Aluminum Heatsink for Cooling MOSFET Transistor Diodes with a Support Pin 20pcs

  • [ MAIN PARAMETER ] small heatsink with a M3 size hole.
  • body overall size: 20 x 15 x 10 mm / 0.79 x 0.6 x 0.4 inch (L*W*H).
  • [ MATERIAL ] Aluminum Alloy material is lightweight and dissipate heat fast..
  • [ APPLICATION ] This heatsink is designed for cooling MOSFET transistors, diodes or voltage regulators (TO-220 components), such as 7805, 7812..
  • [ FEATURE ] With a support pin, this makes it easy for fixing to your components of diy project..
  • [ NOTE ] This cooler is a tiny size, please note before your purchase..
Check Stock

RC Motor Heatsink with 21000 RPM Cooling Fan Aluminum Motor Radiator with RGB Brushless Engine Motor Heat Sink for TRAXXAS 1/8 1/10 Car Truck Buggy SCX10 Tamiya ARRMA Axial RC Car 4274 4268 Motor

  • ❄【Strong and Durable】: This Heatsink are made of high-quality aluminum alloy and plastic material, wear resistant, durable and long service....
  • ❄【RGB Led Light】: Especially design heatsink and Cooling fan can power supply over receiver, convenience and easy to use. Moreover,that heat....
  • ❄【Compatible Models】: 42mm Diameter RC Motor Heatsink for 1/8 scale, 1/10scale RC Car and fit 3010/4010 Size Brushless / Brushed Electric Motor....
  • ❄【Up to 8.5V Cooling Fan】: This Motor Heat-sink Radiator with 5---8.4v power Cooling fan which keep your motor cool and make your motor run more....
  • ❄【Easy to Install】: DKKY RC Motor Heat sink with Small size and lightweight that very convenient for you to install and remove..
Check Stock

uxcell 25mm x 23mm x 16mm TO-220 Aluminum Heatsink for Cooling MOSFET Transistor Diodes with 2 Support Pin Silver Tone 20pcs

  • [ MAIN PARAMETER ] small heatsink with a M3 size hole.
  • body overall size: 25 x 23 x 16 mm / 0.98 x 0.9 x 0.63 inch (L*W*H).
  • [ MATERIAL ] Aluminum Alloy material is lightweight and dissipate heat fast..
  • [ APPLICATION ] This heatsink is designed for cooling MOSFET transistors, diodes or voltage regulators (TO-220 components), such as 7805, 7812..
  • [ FEATURE ] With 2 support pin, this makes it easy for fixing to your components of diy project..
  • [ NOTE ] This cooler is a tiny size, please note before your purchase..
Check Stock