Top Alumina Refractory Bricks Reviews

Simond Store Ceramic Fiber Insulation Roll, 6# Density 2600F, 1' X 24' X 12.5' Fireproof Insulating Blanket for Pizza Oven Forges Foundry Furnace Wall and Dishwasher Insulation

  • Fireproof Insulation: Ceramic fiber blanket, rated to temperature of 2600F, 1 inch X 24 inches X 150 inches, density 6lbs..
  • Chemical composition: Alumina (32%-34%), Silica (49%-52%), Zircon (14%-18%)..
  • For Whom: Perfect for Blacksmiths, Pottery Workers, and Refiners..
  • Uses: Insulation for Forge, Furnace, Kiln, Knife Making, Pizza Ovens, Outside Ovens, , Wood Stove, Home Foundry, Heat Treatment & Glass furnaces and in process of Glass blowing, Turbine, Brazing, Welding, Soldering, Muffler packing, Fireplace Insulation, Boiler, Foundries, Refractory Wool, Glass Blowing, Jewellery Making, Fireproof Doors..
  • Easy Installation: Easy to install with mechanical fastening or high temperature adhesive such as sodium silicate, refractory cement or RTV silicone..
Check Stock

Simond Store Castable Refractory Cement 94% Alumina Dense, 3270°F Rated, High-Temp Castable Pre-Mixed Mortar for Foundry Furnace and Induction-44 Lbs.

  • EXCELLENT MECHANICAL STRENGTH: Characterized with improved particle size distribution, reduced water demand, 94% alumina density, helps to enhance its structural strength and resistance to thermal shock compared to castable of similar compositions..
  • HIGH THERMAL RESISTANCE: This castable refractory cement when applied offers high insulation value and can resist temperature up to 3270°F / 1800°C..
  • CHEMICAL RESISTANCE: It provides outstanding resistance to the penetration of acid, neutral, and basic slags..
  • ENHANCE EFFICIENCY: Because of the low thermal conductivity and good volume stability offered, it increases thermal efficiency of the equipment..
  • APPLICATIONS: Effective in applications at places with excessive wear and abrasive heating atmosphere. It can be used for thermal combustors, chimney linings and Refractory castable is ideal for maintenance or construction of fireboxes or other combustion applications below 3270°F use to cast a dome, or inner hearth in a pizza oven. Can also be used to cast a hearth for a furnace..
Check Stock

Executive Deals Insulating Fire Brick for Ovens, Kilns, Fireplaces, Forges -8 Piece Full Brick (9\ x 4.5\ x 2.5\) 2300 Degree Fahrenheit/1260 Celsius

  • Numerous Applications - Blacksmithing, Oven Construction, Stove Insulation, Glass Making, Fire Places, Clay Pottery Firing, Smelting, & Furnaces.
Check Stock

MEG: Hell's Aquarium

  • Double forge burner furnace with 2300+F capability and perfect for larger projects.
  • Large (19" x 6.75 x 3.5") oval design allows for maximum workspace and ideal exposure to the flame's "sweet spot".
  • Includes container of HELLCOAT 3000 Refractory Coating (to be applied by customer).
  • 1" high density rigid coated extended life ceramic fiber blanket.
  • Includes two full size, thick (9" x 4.5 x 1.25") fire bricks for the bottom.
Check Stock

Hell in the Pacific

  • Double forge burner furnace with 2300+F capability and perfect for larger projects.
  • Large (19" x 6.75 x 3.5") oval design allows for maximum workspace and ideal exposure to the flame's "sweet spot".
  • Includes container of HELLCOAT 3000 Refractory Coating (to be applied by customer).
  • 1" high density rigid coated extended life ceramic fiber blanket.
  • Includes two full size, thick (9" x 4.5 x 1.25") fire bricks for the bottom.
Check Stock

Forge

  • Double forge burner furnace with 2300+F capability and perfect for larger projects.
  • Large (19" x 6.75 x 3.5") oval design allows for maximum workspace and ideal exposure to the flame's "sweet spot".
  • Includes container of HELLCOAT 3000 Refractory Coating (to be applied by customer).
  • 1" high density rigid coated extended life ceramic fiber blanket.
  • Includes two full size, thick (9" x 4.5 x 1.25") fire bricks for the bottom.
Check Stock

The Forge of God

  • Double forge burner furnace with 2300+F capability and perfect for larger projects.
  • Large (19" x 6.75 x 3.5") oval design allows for maximum workspace and ideal exposure to the flame's "sweet spot".
  • Includes container of HELLCOAT 3000 Refractory Coating (to be applied by customer).
  • 1" high density rigid coated extended life ceramic fiber blanket.
  • Includes two full size, thick (9" x 4.5 x 1.25") fire bricks for the bottom.
Check Stock

Insulating Fire Brick for Ovens, Kilns, Fireplaces, Forges - 9" x 4.5" x 2.5" (Inch) / 4.75" x 4.5" x 2.5" (Inch) (4 Piece Full Brick (9" x 4.5" x 2.5"))

  • Insulating Fire Bricks – 9″ x 4.5″ x 2.5″ (Inch).
  • Numerous Applications – Blacksmithing, Oven Construction, Stove Insulation, Glass Making, Fire Places, Clay Pottery Firing, Smelting, & Furnaces.
  • Available in Half Bricks ( 4.75″ x 4.5″ x 2.5″ ) & Full Bricks ( 9″ x 4.5″ x 2.5″ ).
Check Stock

Organic Fine Vermiculite - 15LB Box (70 Quarts) - for Indoor Gardening - Soil Amendment - Soil Conditioning - Grow Media for Gardening - Hydroponics - Mushrooms - Packing Material

  • Aluminosilicate Refractory Ceramic Fiber Board measures 1” X 18” X 24” in size..
  • Maximum Use Temperature: 2300 F (1260 C) | Density: 20-24 lb/ft³.
  • Compressive Strength at 25% deformation - 78 PSI, Permanent Linier Shrinkage - 3.5% Max at 2200 F when exposed to 24 hours soaking heat, Loss of Ignition(LOI) at 1832 F : 4-7.
  • Easy to cut: This Board can be easily cut with knife & hacksaw blade and can be drilled and machined. This board is not as strong as firebrick, it dents easily..
  • Uses: High temperature Board is used to repair or build, Wood Stove, Fireplaces, Pizza Ovens, Kilns, Forges, Internal Baffle of Wood Stove, Pellet Stove, Backup Insulation of Refractory Bricks and Castable Linings, Furnace Hot Face Linings and Boiler Wall Insulation, heat shields, combustion chambers and fire protection. Commonly used to make target walls, front plates and floor insulation..
Check Stock

Dwarves of the Hell Forge: Deluxe Campaign Guide

  • Double forge burner furnace with 2300+F capability and perfect for larger projects.
  • Large (19" x 6.75 x 3.5") oval design allows for maximum workspace and ideal exposure to the flame's "sweet spot".
  • Includes container of HELLCOAT 3000 Refractory Coating (to be applied by customer).
  • 1" high density rigid coated extended life ceramic fiber blanket.
  • Includes two full size, thick (9" x 4.5 x 1.25") fire bricks for the bottom.
Check Stock

Duch: Master of the Forges of Hell (English Subtitles)

  • Double forge burner furnace with 2300+F capability and perfect for larger projects.
  • Large (19" x 6.75 x 3.5") oval design allows for maximum workspace and ideal exposure to the flame's "sweet spot".
  • Includes container of HELLCOAT 3000 Refractory Coating (to be applied by customer).
  • 1" high density rigid coated extended life ceramic fiber blanket.
  • Includes two full size, thick (9" x 4.5 x 1.25") fire bricks for the bottom.
Check Stock

Hell or Richmond: A Novel (The Battle Hymn Cycle, 2)

  • Double forge burner furnace with 2300+F capability and perfect for larger projects.
  • Large (19" x 6.75 x 3.5") oval design allows for maximum workspace and ideal exposure to the flame's "sweet spot".
  • Includes container of HELLCOAT 3000 Refractory Coating (to be applied by customer).
  • 1" high density rigid coated extended life ceramic fiber blanket.
  • Includes two full size, thick (9" x 4.5 x 1.25") fire bricks for the bottom.
Check Stock

Simond Store Ceramic Fiber Insulation Board (2300 F) (1\ X 18\ X 24\), Ceramic Thermal Insulation Board for Wood Stoves Fireplaces Furnaces Forges Kiln Pizza Oven - Pack of 1

  • Aluminosilicate Refractory Ceramic Fiber Board measures 1” X 18” X 24” in size..
  • Maximum Use Temperature: 2300 F (1260 C) | Density: 20-24 lb/ft³.
  • Compressive Strength at 25% deformation - 78 PSI, Permanent Linier Shrinkage - 3.5% Max at 2200 F when exposed to 24 hours soaking heat, Loss of Ignition(LOI) at 1832 F : 4-7.
  • Easy to cut: This Board can be easily cut with knife & hacksaw blade and can be drilled and machined. This board is not as strong as firebrick, it dents easily..
  • Uses: High temperature Board is used to repair or build, Wood Stove, Fireplaces, Pizza Ovens, Kilns, Forges, Internal Baffle of Wood Stove, Pellet Stove, Backup Insulation of Refractory Bricks and Castable Linings, Furnace Hot Face Linings and Boiler Wall Insulation, heat shields, combustion chambers and fire protection. Commonly used to make target walls, front plates and floor insulation..
Check Stock