Top Alloy Steel 1 2738 Reviews

A Dark Heart (Elders and Welders Chronicles Book 2)

️【★TIG&ARC Strong Point】High Frequency Start TIG,Non-Contact Arc Initiation That Reduces Tungsten And Material Consumption.Rated Input Frequency 50/60Hz, Duty Cycle 85%，Improves The Performance Of The Welding Machine..
️【★Feature】TIG/ARC 2-in-1,Tig& ARC Welder With Tig Torch, Earth Clamp, Electrode Holder,Welding Tong.
️【★Portable And Powerful】TIG Welding Thickness 0.3-4.8mm,Stainless Steel, Alloy Steel, Mild Steel, Copper, Cast Iron And Chrome.ARC Welding Thickness 15-42mm.
️【★Energy Saving】Portable Handle Makes It Easier To Operate, The Lightweight Makes It More Convenient To Carry.Suitable For Stainless Steel, Alloy Steel, Carbon Steel, Copper, Copper Alloy And Other Non-ferrous Metal Welding.
️Automatic Compensation For Voltage Fluctuation, Over-voltage Protection, Under Voltage Protection, Over Current Protection, Over Load Protection.

Check Stock

Hardness Testing File Set

【Accurately measured value】-----Precision measurement circuit to ensure Indication error ± 0.5% (HLD = 800), showing the value of repeatability 0.8%.
【Leeb hardness measurement】-----Based Leeb hardness measuring principle, can detect a variety of metal materials.
【Supports a variety of standard hardness】-----Real-time display and conversion: Brinell HB, Rockwell HRC, Vickers HV, Shaw HS, and three kinds of intensity values.
【Applicable Materials】-----Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, nodular cast iron, cast aluminum alloy, copper zinc alloys (brass), an alloy of copper and tin, copper(bronze).
【Application】-----1)Bearings and other parts.
2)Failure analysis of pressure vessel, steam turbine generator group and equipment.
4)Mechanical or permanent assembly installed.
6)The original record of formal requirements on test results.

Check Stock

Lisle 41220 Thick Pickle Fork Set, 5pc.

The set includes five forks: 11/16", 15/16", 1-1/8", 1-7/16" and 1-5/8".
The forks are threaded to interchange with either the handle for hammering or the pneumatic driver (401 shank) and a 6-1/4" extension that works with either handle to provide extra reach.
The forks are heavy-duty forgings and the handles are heat-treated alloy steel The forks are heavy-duty forgings and the handles are heat-treated alloy steel.

Check Stock

IRWIN Drill Bit Set, M35 Cobalt Alloy Steel Steel, 29-Piece (3018002)

Sizes 1/16 inch -1/2 inch in 1/64 inch increments, 135 Degree Split Point To Minimize Walk.
5% Cobalt Alloy Steel For Higher Heat & Abrasion Resistance.
Heavy Duty Web Construction For Strength & Durability.

Check Stock

Weltool Flashlight Strike Bezel - 304 Stainless Steel for Maglite C or D cell flashlights LED ML300L & ML300 LX - Upgrade Maglite Glass Breaker

Upgrade Stainless Steel Strike Bezel fits Maglite C or D cell flashlights, such as Maglite 2-6 C/D cells led, incandescent, ML300 series. Accurate machining, perfectly fit. ATTENTION: Not Fit ML150, ML125,ML100, ML50, ML25 and Mag Charger series!.
Made from an entire steel column with CNC accurate machining, 1.13 times of hardness then 7075 aluminum alloy. It’s much more durable and tougher than aluminum alloy with more impact resistance & corrosion resistance..
6 attack teeth design, fits for self-defense or use to shatter the glass in an emergency..
Sandblasting surface, more wear proof than aluminum alloy’s anodizing and it’s adaptive for flashlight bodies with different colors..
Package includes: 1 * LB03 Stainless Steel Strike Bezel 1 * Replacement Lens 1 * O-ring 1 * Protection Case for Lens.

Check Stock

10pcs 50mm Slotted Screwdriver Bits Set, Magnetic Flat Head 1/4 Inch Hex Shank,S2 Alloy Steel H6.3 * 50*SL6mm

Excellent Material：The Slotted Screwdriver Bits are made of S-2 alloy steel which is a commonly used material in hardware with high hardness.Magnetic head 100mm screwdriver bar using S-2 high quality steel, The Slotted Screwdriver Bits are made of S-2 alloy steel which is anti-impact and tough, great wear resistant. batch head surface for steel material color,from inside to outside are the same..
Exquisite workmanship, each edge can be accurately locked screws, no damage to the screw, and the screwdriver head.
Powerful Function：Strong magnetic,can suck the screws easily when used it.Magnetic bits can be firmly fixed on screwdrivers..
Wide Using Application：With 6.3mm(1/4inch) hex shank, Can be used for electric screwdrivers, hand screwdrivers, electric drills, air drills and other tool sscrew driver, drill, air and other tools..

Check Stock

Makita XCS01Z 18V LXT Cordless Rebar Cutter

★ & : Newly Designed Upgraded torch and consumables ensure more precise cutting and durability of consumable life. Lower your usage cost. Compact plasma cutter has a handle for portability and use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
★ : The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quickly connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be set up quickly within 1 min..
★ & : 10-50A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost..
★ : We offer a - , - - , please submit warranty registration form on our website. - customer service(via phone/email) is available to assist you..

Check Stock

HandLtoolsmart Victor Type Heavy Duty (300 series) Oxygen/Acetylene Cutting, Welding Torch Tool

High quality heavy duty three piece torch kit.
Constructed with high strength alloy, heavy duty stainless steel and durable brass.
Cutting torch and handle are ready for multiple gas options.
Oxy-Acetylene, Propane, Butane, Natural and LP Gases, and Propane.
Cuts 1/8-inch to 5-inch and welds up to 1/2-inch steel.
Package includes: 1 set of torch handle, 1 set of cutting attachment, 1 piece cutting tipDescriptionFeatures:.
Special tips: CA2460 cutting attachment, 315FC torch handle.

Check Stock

Spinning Fishing Reel CNC Aluminum Spool，Ultra Smooth Spinning Reels for Freshwater&Saltwater (CS3000)

POWERFUL:Our fishing reels incredibly Drag System offers drag power up to 22Lb. It has a aluminium alloy main shaft, 4:6:1 perfect mesh drive gear ratio for fish fighting power..
SMOOTH:5+1 stainless steel ball bearings provide incredible smoothness for our fishing spinning reels. The reinforced stainless steel main shaft and Zinc alloy drive gear paired with 6 special washers give you smoother and more consistent performance, no more stuck..
CLASSIC HANDLE: Our spinning reel adopts the all alutilium alloy CNC processing rocker,strong and durable,and the large oversized handle knob is more comfortable and powerful .All of these are to bring you a more pleasant experience of fishing..
LIGHTWEIGHT&STRONG: Desigh of all alutilium alloy in body makes the fishing reel lighter, more compact and powerful, and convenient to carry..
REALIABLE:240 hours Salt Mist Test effectively prevents the spinning reel from saltwater corrosion..

Check Stock

Amazon Basics Standard Exterior Handle Set with Door Knob and Deadbolt, Matte Black

Brass knob body with steel internal structure.
Adjustable latch from 2-3/8"- 2-3/4"(60-70mm).
Includes two (2) brass keys, KW1 keyway, rounded steel faceplate and strike, Zinc alloy latch bolt.
Detailed installation instructions included.
Fit all doors 1-3/8” to 1-3/4” in thickness.
Lock body assembling hole 2-18”(54mm) dia..

Check Stock

Amazon Basics Standard Exterior Handle Set with Door Knob and Deadbolt, Oil Rubbed Bronze

Brass knob body with steel internal structure.
Adjustable latch from 2-3/8"- 2-3/4"(60-70mm).
Includes two (2) brass keys, KW1 keyway, rounded steel faceplate and strike, Zinc alloy latch bolt.
Detailed installation instructions included.
Fit all doors 1-3/8” to 1-3/4” in thickness.
Lock body assembling hole 2-18”(54mm) dia..

Check Stock

TAILUG Hand Manual Reversible Impact Driver, 1/2 Inch Drive Impact Screwdriver Set Rusty Fasteners Extractor with S2 Steel Bits 16-Piece

... and thicker bottom ensures optimal strength and resistance to corrosion, while the knurled handle provides a sturdy and safe grip. The whole body of the scewdriver is heat-treated for reinforced solidness. Black manganese phosphate coating on the surface, anti-corrosion and anti-rust, prolong the service life..
/S2 ALLOY STEEL BITS/: It comes with 14-Piece S2 alloy steel precision-milled impact driver bits and screw extractors. S2 alloy steel screwdriver bits can withstand larger impact force and higher torque, which prevents slippage or wear, no more twisting or breaking..
/PACKAGE INCLUDES/: 1 x 1/2-inch Impact Driver, 1 x 1/2-inch drive bit holder, 4 x Phillips PH2, PH3.

Check Stock

4LIFETIMELINES Economy Brake Line Flare Kit for Single, Double (SAE) Flares & Bubble (ISO) Flares - 2 Flaring Bars, 9 Flaring Dies, Tubing Reamer, & Storage Case

Creates single, double inverted (SAE) flares & bubble (ISO) flares up to 0.040″ wall thickness.
Designed to perform flares on thin wall steel, aluminum, copper, and nickel-copper tubing.
Includes flaring dies for sizes: 3/16″, 1/4″, 5/16″, 3/8″, 1/2″, 4.75mm, 6mm, 8mm, 10mm.
Self-centering yoke has corresponding slots to hold bar assembly tightly in place during flaring.
Contents Include: (1) SAE Forged Alloy Steel Flare Bar, (1) Metric Forged Alloy Steel Flare Bar, (1) Self Centering Premium Yoke, (10) Flare Die Heads, (1) Tubing Reamer 3mm-12mm, (1) Rigid Plastic Storage & Carrying Case.

Check Stock