Top All purpose Thermocouple Reviews

3\ Outside Air Kit for Pellet Stoves with 3\ Air Intake Pipe Including Harman Stoves 3\ X 10'

  • QuadraFire Thermocouple 800, 1000, 1100i, 1200, 1200i Pellet Stoves 812-0210.
  • Top Quality Aftermarket Replacement Part.
  • The Thermocouple is the device that monitors the fire after start-up. Once it reaches temp the thermocouple allows the stove to start feeding on it's own in normal operation mode. If your stove goes out after the initial start-up cycle, more than likely the thermocouple needs to be replaced..
  • Designed Specifically for the above mentioned models.
Check Stock

3 Meters K Type Mini-Connector Thermocouple Temperature Probe Sensor Temperature Sensing Line K Type Thermocouple Wire Measure Range -50 to 400 Celsius, Compatible with TM902C/ TES1310 (5 Pieces)

  • You will get: the package comes with 5 pieces k type thermocouple temperature probe sensors in 3 meters long, the enough quantity and length to meet your daily need.
  • Measurement range: the measure range of the temperature sensing line is -58 to 752 °F (-50 to 400 °C).
  • And the probe sensor can effect in 5 second with the accuracy degree 0.025 or 0.075.
  • Wide Applications: for general purpose temperature applications, the k type mini-connector is fastly response that is suitable for rapid measurement of air and gas, not suitable for liquid measurement.
  • Allows forming and bending of the thermocouple, so you don't need to worry about the risk of cracking.
  • Universal compatiblity: the thermocouple wires can compatible with most k type temperature measuring instruments, they can compatible with TM902C and TES1310.
  • Good insulation : the k type probe sensor is made of the fiberglass, which has good insulation, strong heat resistance and strong tensile strength.
Check Stock

Thermocouple Probe Kit Compatible with Traeger Ironwood 650/885 and Pro 575/780, KIT0422

  • T-type thermocouple connector, real Copper / Contstantan contacts.
  • Miniature or mini T-type connector dimensions.
  • Works with all T-type thermocouple wires and extension wire.
  • 5 sets, each contains a male and a female connector (2 pieces).
  • Compatible with thermocouple plugs from other manufacturers.
Check Stock

3D Printer T-K500 m3 x 15mm K Type Thermocouple Sensor K-Type Compatible with Volcano V6 HOTEND Block 500℃ PEI PEEK High Temperature 3D Printing

  • This Thermocouple sensor is 3mm x 15mm cylindrical package with 1 meter long cable compatibility with all ID 3mm cartridge-style heater blocks..
  • Thermocouple Wire with 304SS Braid Over Glass Insulation,Durable, Flexible and Long Lasting.
  • Thermocouple sensor for high temperature printing up to 500C and 450 degree long hours guaranteed.
  • Package: 1piece K type thermocouple (Positive wire: Yellow.
  • Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference, if you need an amplifier module, please search the ASIN ID " B08C4Z9PZS ".
Check Stock

Thermco ACC310DLSDIG Laboratory Long Stem Digital Thermometer, 12\ Stem Length, -50 to 300°C Range, +/-1.0°C Accuracy

  • High Temperature K-type Thermocouple Thermometer Set with Stainless Steel Probe.
  • K-type thermocouple wire with Standard Accuracy: +/- 2.2 °C or +/- .75%.
  • 5 ft (155 cm) long thermocouple cable with braided stainless steel cover, mini thermocouple plug made from chromel / alumel.
  • Temperature measurement range: -328 to 932 °F (-200 to 500 °C), short term 1472 °F (800 °C).
  • Grounded K-type Thermocouple junction for fast measurements, 1x 9V battery included.
Check Stock

Instrukart Dry Block High Temperature Calibrator AI-DBC 650 for Calibration Labs Pharmaceutical divisions Thermal Plants divisions Along with Calibration Certificate

  • Accuracy: ±0.6°C, Bath Stability: ±0.5°C.
  • Measuring Functions: J Type Thermocouple, K Type Thermocouple, T Type Thermocouple, R Type Thermocouple, S Type Thermocouple, N Type Thermocouple, MA, MV, Volts, Ohms, RTD (Pt 100).
  • Temperature Steps: 50°C, 150°C, 300°C, 450°C, 600°C.
  • Switch Test: Continuity check with OPEN / CLOSE indication.
  • Transmitter Supply: 24V DC ± 10% (Loop Powered).
  • Power Supply: 230V AC ± 5% / 50Hz, 500 W for 350UTC.
  • Supply Scope: Instrument, Power Cable, Carrying Case, Test Lead(2 & 3 Wire), Insertion Tube, Insertion Tool,Spare Fuses: 6A x 2nos User Manual, Calibration Certificate.
Check Stock

Emerson H06F 36 Universal Junction Block Thermocouple 36 inch

  • 36 inch junction block thermocouple with energy cut-off.
  • Stainless steel element construction for prolonged thermocouple life.
  • Standard coaxial thermocouple 11/32 inch double lead thread.
  • Universal adapter fittings included with each kit for replacing thermocouple in most types of pilot burners.
  • Works for both LP and natural gas applications.
Check Stock

Cooper Atkins 35132 Aquatuff with Wrap&Stow Duraneed

  • Waterproof Thermocouple Thermometer - Precise digital thermocouple thermometer, delivers a true +/- 0.9 degrees Fahrenheit accuracy and probes can be replaced in the field without the need for recalibration.
  • Heavy Duty Probe Cable - Patented thermocouple thermometer probe cable that neatly wraps and stows around the instrument. Uses any K Type probe.
  • DuraNeedle Probes - Best used for dense meats. Also works well with soft foods and liquids. Probe is calibrated with instrument for Total System Accuracy.
  • Waterproof Digital Thermocouple - Large easy to read digital LCD display, auto shutoff after 10 minutes of non-use. IPX7 waterproof rated.
  • Cooper-Atkins Corporation - Headquartered in Middlefield, CT, Cooper-Atkins has been a leading manufacturer of quality time, temperature, and humidity instruments serving the Foodservice, HVAC and Healthcare markets since 1885.
Check Stock

GBC Document Camera, Discovery 3000 (DCV10004)

  • pyrometer Temperature range: -50°C to 1300°C ( -58°F to 2372°F) and Overload display alert when input exceeds measurement range pyrometer. Thermocouple Temperature range: -50°C to 1000°C ( -58°F to 1832°F).
  • Designed for use with K-type thermocouples and Selection between Celsius and Fahrenheit.
  • Decimal or round number display selectable (decimal range is -58.0F to999.9F and round number range is -58F to 2372F).
  • Includes 2 Thermocouples ( One 3" K type temperature probe (-58 – 752 °F) and one Kiln Heavy duty K type Thermocouple ( -58°F to 1832°F) and Digital Pyrometer, 9V battery and Manual.
  • Thermocouple Measurement range: 32 - 1832 °F (0 - 1000 °C) Thermocouple Type: K Type Cable length : 3 ft Sensing tip length: 6" (150mm) Stainless Steel Sensing tip diameter: 0.19" (5mm) Thread width : 5/16" (M8) Internal Insulation: Fiber Glass External shielding: Metal Shield (Stainless steel braided).
Check Stock

Coolrunner Gas Patio Heater Repair Replacement Parts Outdoor Heaters Safety Kits Thermocouple (M8 x1) and FD4 Dump Switch for Propane Gas Patio Heater

  • Well Made & More Safe: The thermocouple is made of brass and red copper and the anti-tilt switch, made of ABS, which will automatically stop heating when the gas heater is tilted..
  • Wide Compatibility: The patio heater thermocouple replacement is suitable for most of propane heater, patio heater and other gas heaters with thermoelectric safety..
  • Dimension: The total length of thermocouple is 350mm, thermocouple probe is M6*0.75 and threaded end is M8*1, please measure your original parts before ordering. Weak current FD4 dump switch is for gas R≤10 mΩ..
  • Easy to install: It is easy to replace just follow the way you remove the defective part. Notice: Keep the thermocoupler probe about 5mm from the burner hole..
  • Great Value for Money: If the thermocouple or dump switch of your gas heater is broken, you just need to change the replacement that will save $200 for you..
Check Stock

Water Heater Pilot Assembely Includes Pilot Thermocouple and Tubing LP Propane

  • LP Propane GAS WATER HEATER PILOT ASSEMBLY AND THERMOCOUPLE.
  • STANDARD 24" LENGTH total. Tubing and thermocouple length 22 inches.
  • FITS MANY WATER HEATERS ON THE MARKET BUT NOT ALL.
  • WARNING !!! ONLY QUALIFIED SERVICE PERSONEL SHOULD ATTEMPT TO REPAIR GAS EQUIPMENT.
  • Search for our 36" pilot if you need a longer one..
Check Stock

UNI-T UT701 Single Function Temperature Calibrator

  • 1. Up to 0.05% output accuracy 2. 6-digit display 3. Output functions: DC voltage, resistance, thermocouple, and thermal resistance.
  • 4. 10 thermocouple scales 5. 4 thermal resistance scales 6. High precision automatic cold junction compensation for thermocouple outputs.
  • 7. Manual stepping and automatic stepping and ramping 8. Stores and recalls setups.
Check Stock

TWTADE 5pcs 3M K Type Mini-Connector Thermocouple Temperature Probe Sensor Measure Range -50~350°C

  • Measurement range: -58 to 662°F (-50 to 350°C).
  • For general purpose temperature applications,Fast response time.
  • Compatible with Type-K temperature measuring instruments.
  • Package Content : 5 x Temperature Sensor.
Check Stock