Top Air Tool Fitting Reviews

Diversitech GG-1 Drain Gun for A/C Condensate Lines, Charcoal Grey

  • LIGHTWEIGHT AND PORTABLE TOOL: This Drain Gun weighs in at 3 oz. and is designed to blow out condensate drain lines instantly. No need for carrying heavy air or nitrogen tanks..
  • AIR POWER: This air blower blaster is ready for use after insertion of a Swoosh CO2 cartridge. With the press of the trigger, the gun releases 800 psi (max working pressure 1200 psi) of oil free food grade air..
  • TAPERED AND FLEXIBLE FITTING: Each unit comes with a fitting to work on 3/8" - 3/4" drain openings. Its flexibility allows you to maneuver through cabinets, coils, and those hard to reach drains..
  • The drain gun uses carbon dioxide and is completely safe for use in the environment. It is the perfect solution to choose instead of the environmentally unfriendly practice of using refrigerant to clean the drain line..
  • EASY TO USE: With clear instructions, reduced labor costs, and time saved, this A/C cleaning tool will become any HVAC technician's new best friend..
Check Stock

YON.SOU. Air Cut Off Tool with 2 pcs 3-inch Die Grinder Cut-Off Wheels, Pneumatic Metal Sheet Cutting Tool, Heavy Duty Air Cutter Cutoff Tool

  • ⚙️ COMPLETE AIR CUT OFF TOOL SET: The air cutter tool set comes with 2pcs 3" cut off wheel, 2pcs wrenches, 1pcs 1/4" NPT air fitting and 1pcs air cut off tool. This air cutter has complete accessories for you to try out and start your job right away..
  • ⚙️ AIR-POWERED&MAX SPEED 20,000RPM: The 3 inch air cut off tool is up to 20,000 RPM, which is 15% more efficient than ordinary air cutter tools, the air cutoff tool by YON.SOU. gets your job done more quickly..
  • ⚙️ WHEEL GUARD AND SAFETY SWITCH: The high speed pneumatic cut off tool is equipped with 180 degrees wheel guard which is adjustable for 360 degrees, the wheel guard is made of chrome plated alloy steel which prevents sparks flying to your face. The air cut off tool is also equipped with safety switch for maximum safety which could prevent accidental start-up..
  • ⚙️ EASY TO USE AND PRECISE TO CONTROL: The air cut off tool kit comes with 1pcs hex wrench and 1pcs hand wrench for you to easily install or replace cut-off wheel. The pneumatic cutter is made of aluminum housing which is lightweight and durable for you to precisely control the air c....
Check Stock

NEIKO 30128A Composite Air Impact Wrench | 1/2 Square Drive | 600 Ft-Lbs | Twin Hammer | Pneumatic Tool

  • [HEAVY DUTY]: This pneumatic impact wrench with twin hammer fastens at a no-load speed of 7, 500 RPM and delivers a maximum breakaway torque of 600....
  • [ERGONOMICS]: The ergonomically grooved pistol-type handle gun grip is designed to maintain operator control, efficiency, accuracy, and reduce fatigue....
  • [FEATURES]: The air tool has a control mechanism to easily switch between clockwise and counter-clockwise rotational torque direction to suit your....
  • [INCLUDES]: Air impact wrench kit includes a coupler fitting, allen wrench, and lubricant oil accessories for tool maintenance to keep your impact in....
  • [APPLICATION]: This tool is recommended to be used with an air compressor of 3 horsepower (HP) and 90 psi air pressure and has a 1/4” NPT air inlet....
Check Stock

4 Pieces 1/4 Inch NPT 360 Degree Swivel Air Hose Connector 1/4 Inch Swivel Air Plug Air Fittings Connectors Portable Air Tool Plug Male Thread Female Thread Household Industrial Coupler and Plug

  • 360 Degree rotation: both male air hose connectors adopt 360 degree swivel design, which would not break the air hose, and prevent the hose from kinking, keeping the air line from getting tangled and twisted and increasing the maneuverability.
  • Widely applied: there are two connections of 1/4 external rotation and 1/4 internal rotation on the NPT swivel fitting, suitable for 1/4 inch male NPT and 1/4 inch female NPT, which can be applied to standard threaded fittings and most common applications at home.
  • Practical function: this swivel air hose connector can be applied in the air inlet of the spray gun or pneumatic tool, providing an unhindered air path and improving flexibility between the hose and the pneumatic tools.
  • Quality material: this air line swivel fitting is made of aluminum, solid and reliable, featuring strong corrosion resistance and rust resistance, which can offer you a long service life.
  • What you get: you will get 2 pieces of 360 degree swivel air tool plugs and 2 pieces of 360 degree universal hose swivel connectors, which can be applied together to avoid you buying twice separately.
Check Stock

JACO Dually Tire Air Chuck – 1/4″ NPT | Dual Head Straight Foot (Closed Flow)

  • Dual Head – this straight, extended dually tire air chuck features dual heads designed for use on both inner and outer facing tire valve stems on dual wheel setups such as dually trucks, semi trucks, trailers, RV, motorhomes, and campers..
  • Extended Reach – this straight dual air chuck measures 6.7 inches long, making it easier to access hard-to-reach tire valve stems. Built to last from solid steel & trusted by mechanics and truck drivers everywhere..
  • 1/4 inch Fitting – the end of the tire chuck features a precisely machined 1/4 inch F-NPT (female) threaded fitting, making it compatible with most air compressor hoses & accessories..
  • Lifetime Warranty – all JACO tools come backed by a 100% Lifetime Warranty that covers all performance and manufacturing issues, so air up your dually tires with confidence using a quality JACO air tool!.
Check Stock

Makita 565056-5 Power Supply Cord

  • ...and external connections for dust collection.
  • The highly flexible commercial grade vacuum hose has a smooth interior to resist clogging with large profile debris while supplying superior airflow. Airflow to the tool can be modified as necessary for suction control using a swivel air relief feature built into bayonet fitting.
  • Comes with quick click system for connecting to the exhaust port on all major brands of hand held and stationary power tools. A collar with clip ring, and bayonet fittings with ¾”, 1”, 1-1/4”, 1-½” soft TPE fitting are designed to accept and hold exhaust ports designed to fit the hose internally or externally as demanded by the power tools design. Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool.
  • Designed to fit most major brands of power tools and work shrouds including Skill Bosch, Ryobi, Makita, Dewalt, Festool. Fein, Cobalt, Porter Cable, Hitachi and Milwaukee Electric.
  • The tank end is designed to fit all major brands of home shop vacuums including Shop Vac, Vacmaster, Ridgid, Craftsman, Dewalt, John Deere, as well as many private brands typical of the 2 ½" vacuum connection.
Check Stock

SCITOO 2pc Water Pump Tool 32mm Fan Clutch Nut Wrench acd Water Pump Holder for BMW for Ford

  • ...ening size before bidding, there are only 32mm 35mm 40mm 45mm, 4 sizes adapters.
  • EASY OPERATION: Completely discharge the old coolant and trapped air first. Use the adapter or work with a suitable adapter sleeve to seat on the radiator opening, rotate the golden knob to seal. Connect the vacuum pump by the brass tee fitting to vacuumize to optimal filling pressure range: -25~-20 inHg. Then take the filling coolant hose to replace the tee fitting to fill coolant. Operate according to the instruction. The filling usually needs 5 to 10mins, depending on the size of the tank.
Check Stock

Beduan 4 Jet Pneumatic Cement Stucco Sprayer Gun Plaster Mortar Automatic Air Panting Tool for Wall

  • Package include: 1 x Sprayer Gun Tool. Quickly and easily apply stucco, mortar and plaster..
  • The cement sprayer is made of high-quality stainless steel, ensure structurally strong and lifetime anti-rust guarantee. It is lightweight and compact, so you can carry it with you..
  • Size: 30 x 7 x 7 inch. The end thread on the handle is 1/2" Male, and we provide with a 1/2" Female x 3/8" Hose Barb Fitting. If your tubing is not the 3/8" ID type. You can purchase a 1/2" Female x 【any size barb】 fitting which is suitable for your hose ID to connect with..
  • Easy Working: Cooperate with air compressor or air pump, saving time and material..
  • 4 Jet Stucco Sprayer Hopper Gun: It is equipped with 4 nozzles to match your work and air compressor, which is very useful for traditional plastering..
Check Stock

Air seat blow gun kit,Heavy Duty Truck cab air blow gun Cleaningwith 9 Meter Long Coil and 2 interchangeable nozzle tips -Air Duster Blow Gun Kit

  • This Air Blow Gun Kit is Professionally Manufactured and Designed for Efficient Blowing of Air, Cleaning Parts and Surfaces.Wide Use on Trucks with Air Ride Seat Systems, for Car Lorry Truck, for Truck Dust Blow.
  • It helps with dust, debris, dirt in the vehicles..
  • The air blow gun kit is convenient for drying off fluids, clearing debris, and much more.2 interchangeable nozzle tips, for different places, spacious or narrow spaces.Plastic hanging hook, easy to use and convenient for placing and storage.Includes 9 Meter Long Coil coiled,burst pressure up to 120 PSI, meet your normally use..
  • T-Shaped Quick Connector With Bronze Ball Automatic Shut-Off Valve,it contains teflon tape, which can effectively avoid fitting leak air.
  • PU Hose, good elasticity, It won't break, even if the temperature is below zero.
  • Complete kit splices into air seat supply.
  • Blow gun kit Also known as air blow gun kit,air seat blow gun kit , Truck Dust Air Blow Gun Kit ,truck cab air blow gun kit, blow gun air tool kit.
  • Include Air Blow Gun, Brass Tee Fitting, Long Nozzle, Air Hose, Teflon Tape.comes with 90 DAY limited warranty.
Check Stock

Maxline M7580 Master Kit, 3/4-Inch x 300-Feet

  • of 3/4-Inch Tubing, (3) Air Outlet Kits, (2) Tee Fittings, 3/4-Inch Straight Fitting, (20) Pipe Clips, Debar and Cutter Tool.
  • 175 psi maximum working pressure, 3/4-Inch inside diameter x 1-Inch outside diameter.
  • Compression style nickel plated brass fittings.
  • maximum from the air compressor, up to 4000 sq..
Check Stock

6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool, High Pressure Oil Rail Adapters Leak Test Kit and 6.0 IPR Valve Socket with Seal Kit Fit for Ford 6.0L Powerstroke Diesel Engine

  • Fitment: IPR Valve Air Test Fitting and Oil Rail Adapters perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
  • 6.0 IPR Valve Socket compatible with Ford 6.0L and other diesel engines, and Seal Kit fits for 2003-2010 Ford 6.0L V8 Diesel Turbocharged Modles.
  • High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these tool kit show their high tightness, corrosion resistance and durability.
  • Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
  • IPR Valve Air Test Fitting : This tool has 1/4 inch pipe threads to accept standard air fittings.
  • It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
  • 6.0 IPR Valve Socket with Seal Kit: Use with 3/8" square drive, 12 point design socket can tightly locate your IPR valve in a very tight location, also built to bottom out on the hex so it does not put torque on the connector in case it can be reused (Include IPR Valve Seal Kit OE Number 3C3Z9H52....
Check Stock

JACO Bike Presta Valve Tire Air Chuck - 1/4" NPT (2 Pack) (Open Flow)

  • Open Flow - these Presta valve attachments are open flow, meaning air will flow freely through the chuck even if not engaged with the tire valve stem (no check-valve). Must be used with an inline tire inflator gauge or standard tire gauge (Not for DIRECT connection to air compressor hose)..
  • 1/4 inch F-NPT fittings - feature a standard 1/4 inch F-NPT fitting, making them compatible with inline tire inflator tools and tire gauges..
  • Rugged & reliable - these straight angled Presta valve tire chucks are made of high-quality brass, providing a sturdy and reliable connection between your tire inflator tool and your bike tires..
  • Presta valve compatibility - the air chucks are specifically designed to work with presta valve equipped bike tires, allowing you to quickly and easily inflate your tires (NOT for Schrader valve types)..
  • Easy to use - simply attach them to any hand-operated, inline tire inflator tool connected to an air compressor hose, and start inflating your tires (NOT for use with floor pumps, hand pumps, or 12v air compressors)..
Check Stock

CTA Tools A198 Valve Spring Compressor

  • Removes springs and valve guide seals without removing cylinder head.
  • Used by removing rocker and fastening tool to stud with nut, then use an air-hold fitting and compressed air to hold valves up.
Check Stock