Top Air Plasma Cutter Reviews

LOTOS LT5000D 50A Air Inverter Plasma Cutter Dual Voltage 110/220VAC 1/2\ Clean Cut

  • ★ AIR PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
  • ★ OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC)★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz)..
  • ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website..
  • ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LT5000D Plasma Cutter are "LCS22" or "LCS33". Please search "Lotos LCS22" or "Lotos LCS33".
  • ★ It CANNOT compatible with Lotos LCOn20, LCON40 or LCON90 Consumables Sets or any other third part consumables set. ★ PACKAGE INCLUDES: Power supply, Plasma cutting torch, ground clamp, Pr....
Check Stock

FLARING Plasma Cutter Equipment 50 AMP 220V IGBT 1/2'' Clean Cut CUT50 Max 3/5‘’ Cut High Frequency Inverter Plasma Cutting Machine for Car Frame,Carbon Steel,Stainless Steel,Thin Copper,Aluminum

  • [Cutting Ability] This plasma cutter machine automatic 220v(50/60hz),10-50A dc output, 1/2″(12mm) ideal clean cut and 3/5″(15mm) maximum severance cut under 220v,70% duty cycle. The upgraded model only supports 220v voltage input..
  • [Cutting Material] Compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper,cast iron,chrome and aluminum(Aluminum≤1/4″,Copper≤1/5″).
  • [Breaker Recommendation] We suggest a 30A breaker on 220V while using this plasma cutter.Air Pressure 60-70PSI suggested.Btw,this CUT50 plasma cutting machine works well with a generator above 5000W..
  • [Fan-Runs-on-Demand cooling system]The new machine uses powerful cooling system, “dormant” fan,only operates when needed. This cuts down on fan noise, along with reducing power consumption and contaminants drawn into the machine..
  • [Warranty Assurance] We are a manufactory with over 10 years’ experience of professionals producing the plasma cutter machines,3 year’s warranty.Please add to cart and take it without hesitation.
Check Stock

WeldingStop 770496 770723 Electrode Tip for Hobart Plasma Cutter Airforce 250ci HP-25 and AirForce 500i HP-50 Torch

  • These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
  • Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
  • Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
  • The hobart 770723 plasma cutter parts kit including 5pcs electrodes and 5pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
  • Every package including 10pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
  • All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check Stock

WeldingStop 770496 Electrode and Tip Kit for Hobart AirForce 250ci 500i HP-25 HP-50 Plasma Torch 4-Pack

  • These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
  • Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
  • Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
  • The hobart 770496 plasma cutter parts kit including 2pcs electrodes and 2pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
  • Every package including 4pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
  • All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check Stock

PrimeWeld 50A Air Inverter Plasma Cutter, Portable Plasma Cutting Machine, Premium and Rugged Plasma Cutter Kit, Automatic Dual Voltage 110V/220V AC with Plasma Torch, 1/2\ Clean Cut, CUT50D

  • THE ULTIMATE PLASMA CUTTER - When precision metalwork cuts matter. As one of our customers said, “It will do the job very well I have had mine for almost three years and it's been very reliable.” Our 50 Amp Digital Air Inverter Plasma Cutter handles cuts up to 1/2" (Max Severance Thickness: 3/4") with ease. Designed for both demanding industrial and construction work, or home and hobby use..
  • MAKES THE PRECISION CUTS YOU NEED - With your Prime Weld Plasma Cutter, you can cut stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials without breaking a sweat. Have limited outlets? No problem. The diversity between 110v and 220v has you covered..
  • TRULY PORTABLE - If you need a portable Plasma Cutter that makes moving from project to project a breeze at a price that won’t break the bank, this is it. As another happy Amazon customer said, “For the price this plasma cutter is amazing…” Add our Plasma Cutter to your cart today and experience our high-quality product craftsmanship for yourself..
  • DESIGNED BY PROFESSIONALS - If you are serious about getting the job done, PRIMEWELD is a brand you can trust backed by our fanatical customer service. Our high-quality Plasma Cutters are perfect for metalwork jobs of all shapes and....
Check Stock

Warfox Plasma Cutter 120/240V Dual Voltage Plasma Cutting Machine, Max Cutting Thickness 14mm, Clean Cutting Thickness 10mm in 65PSI (CUT50D 120/240V)

  • Plasma Cutter, 120V/240V 50A plasma cutter with IGBT inverter technology, long life and efficient higher than mosfet machine. IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting.
  • Plasma cutting machine has current display function and air post time adjustment. Adjustment range is 2-20S, users can adjust the time for post air, effectively providing cooling,extend consumable's working life.
  • Max cutting thickness 14mm ,10mm quality cutting thickness in 240v@65PSI 50A.
  • Under 120V, it is 35Amps.Quality cutting thickness is 8mm, Severance cutting thickness is 12mm.
  • Accessories included:4M PT31 cutting torch, 2.5M Earth clamp,5pcs tips, 5pcs electrodes, 2 meters air hose, 4pcs hose clamp, 1adaptor, 1 manual.Air regulator,air filter,air gauge are fixed at machine.
  • The cutting machine can cut carbon steel, stainless steel, steel and other materials. It is an indispensable machine in your tool room.
Check Stock

Reboot Plasma Cutter 45 Amp IGBT Inverter RBC4500 AC 220V Air Plasma Cutting 1/2 Clean Cut 15MM Max Cutting High-Frequency Duty Cycle for Aluminum Stainless Mild Steel Copper Iron

  • [Cutting Thickness] Plasma Cutter 20-45A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V,air pressure 60PSI....
  • [Blowing Back] Plasma cutting Torch Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and....
  • [Generator Supported] this plasma cutter 45amp works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V.
  • [Wildely Application and Low Cost] this plasma cutter available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • [Warranty] buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local....
Check Stock

Dynaloop Plasma Cutter 50Amps, Dual Voltage 110V 220V Plasma Cutter Machine, 8-10mm Cutting Thickness,16Pcs Plasma Cutting Equipment (DC500D 110V220V)

  • 【Inverter plasma cutter】： DC500D has the function of Inverter technology high frequency arc initiation（50/60HZ）. This plasma cutter needs to touch the workpiece to arc, we suggest pilot arc function If you don't like to touch metal to arc..
  • 【Automatic voltage detection】：Plasma cutting machine can adapt to dual-voltage, whether access 110V or 220V circuit can be automatically identified, and displayed on the front panel, no manual adjustment..
  • 【Air Filter Pressure Regulator Combo】：Plasma cutting machines cut materials by compressing gas(Oxygen,air, inert and others depending on material being cut ), Air regulator inside the machine can lower or maintain air pressure and filter moisture and fine particles from the air to reach effective cutting..
  • 【Cutting Thickness】The plasma cutting machine can cut different thicknesses under different voltages. ✨110V: 35A, 30-50PSI (Quality cutting thickness is 6mm#60PSI(0.6Mpa).
  • Max cutting thickness is 10mm#60PSI( 0.6Mpa)).
  • ✨220V: 50A, 30-70PSI(Quality cutting thickness is 10mm#65PSI(0.65Mpa), Max cutting thickness 14mm#65PSI(0.6Mpa))..
  • 【Portable & Multi-purpose】20lb cutting machine can be carried anywhere to cut workpiece, suitable for cutting stainless steel, alloy steel, low ca....
Check Stock

Herocut Plasma Cutter, 35Amp Plasma Cutting Machine, HF 50/60Hz Invert Technology Plasma Cutter, Max Cutting Thickness 8mm (CUT35 110V)

  • ✤ Plasma Cutter, 110V 35A cutting machine with IGBT inverter technology, It is long life and efficient higher than mosfet machine..
  • ✤ Very good to cut car flame, Clean cutting thickness 6mm Max cutting thickness 8mm in 110V 60PSI Machine only work in 110V not 220V, Please confirm the voltage before buying this machine. Machine maybe explode if connect it to 220V, Be careful~!.
  • ✤ This plasma cutter with current display and air gauge fixed on panel, Easy read air pressure and current, these functions are great to help the user cut any metal..
  • ✤ The plasma cutter easy to cut stainless steel, Alloy steel, mild steel, Copper etc. Quality cutting torch PT31 come with machine, Max cutting thickness is 10mm at 40Amps 110V 60PSI..
  • ✤ Machine come with 110V power plug, We provide three years warranty for this unit..
Check Stock

WeldingStop 40pcs SL60 Electrode 9-8215 Tips 9-8211 Nozzle 80A for Thermal Dynamics SL60 SL100 Torch CutMaster 52 82 152 102 Plasma Cutter Consumables

  • ✓CutMaster Cutter—— The plasma cutter spare parts kit are fitting in Thermal Dynamics CutMaster 52 / 82 Plasma Cutter SL60 Plasma Cutting.
  • The plasma consumables also can fit Thermal Dynamics CutMaster 102 / 152 Plasma Cutter with SL100 Plasma Torch.
  • ✓For Use With Torch—— These electrodes and tips are fitting in plasma Torches 2CZF1 and 2CZF2.
  • ✓Package Including—— 20pcs SL60 electrodes 9-8215 and 20pcs SL60 standoff tips 9-8211 80A Nozzle WS OEMed.
  • ✓Plasma Cutting Current—— These plasma consumables can be uesd within 80A plasma cutting.
  • ✓Replacement Parts—— These electrodes and tips are replacement parts that made by WeldingStop, and not original.
Check Stock

PD0088-12 PD0019-12 Drag Tip Kit for Eastwood Versa-Cut 40amp Plasma Cutter Consumables 34pcs

  • 34pcs Plasma cutting consumables kit equivalent to Eastwood Versa-Cut 40amp plasma cutter PLTrafimet CB50 torch consumables, aftermarket replacement, not original.
  • PD0088-12 Plasma tip / nozzle x 10pcs, drag tip,diameter 0.047in / 1.2mm.
  • PD0019-12 Plasma tip / nozzle x 10pcs, diameter 0.047in / 1.2mm.
  • PE0007 Plasma air diffuser x2pcs,PC0003 Plasma outside nozzle x 2pcs.
Check Stock

Dyllica 9-8213 Plasma Start Cartridge 9-8277 for Thermal Dynamics CutMaster 52 Consumables SL60 SL100 Plasma Part Consumables 1pc

  • 【Dyllica Brand Plasma Start Cartridge】The plasma Start Cartridge 9-8277 is made by Dyllica Brand.
  • It can be used as plasma aftermarket parts which can install on DYThermal Dynamics SL60 SL100 plasma torch.
  • 【Plasma Consumables Type & Ref Number】Plasma Start Cartridge, item ref number is 9-8213 / 9-8277.
  • 【As SL60 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge can install on DYThermal Dynamics SL60 torch with Cutmaster 38 / 52 / 12 / 20 /25 plasma cutter machine.
  • 【As SL100 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal Dynamics SL100 torch with Cutmaster 102 / 152 / 40 plasma cutter machine.
  • 【As SL60QL Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal DynamicsSL60QL torch with Cutmaster 58 / 60i plasma cutter machine.
Check Stock

Plasma Cutter 110&220V 45Amp 1/2\ Clean Cut 3/5'' Max Cut Plasma Cutting Machiner,HF IGBT Inverter Portable Plasma Cutting Equitment for Aluminum Alloy Mild Steel Cast Iron

  • ✅ 【High-Frequency Cut】Professional Plasma Cutter,high-Frequency Plasma cuts thicker materials than standard DC plasma cutters. Cuts faster with less distortion in the workpiece.It is easy to ignite arc by adopting HF arc ignition.With IGBT inverter technology, It is long life and efficient higher than most machine. It is IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting.
  • ✅【Cutting Thickness】20-50A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V. 20-35A DC output: 1/3" ideal clean cutting and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation..
  • ✅【Wildely Application】This plasma cutting machine available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • widely used for automotive, ducting work,repair/maintenance,metal processing,manufacture ect,lightweight and portable,also suitable home DIY and industrial projects ..
  • ✅【Setup Simple】Automatic Dual Voltage Transfer / Dual Frequency (110/120 V 220/240 V 50/60Hz),With the protection of the electric circuit against over currents, over voltages and low voltages, the cutting welder works in a more safer and professional. Air post time adjust function, the adjustment range is 1-....
Check Stock