Top Air Hose Quick Disconnect Reviews

Fuel Line Disconnect Tool Set, 22pcs Master Quick Disconnect Tool Kit for Automotive AC Fuel Line and Transmission Oil Cooler Line, Includes Scissor Type Remover, Compatible with GM Ford Chevy Models

  • 22pcs Master Quick Disconnect Tool Kit for separating automotive ac hose and fuel lines, suitable for a wide variety of domestic and foreign automotive..
  • The fuel line disconnect tool set is used for most fuel lines, air conditioning lines, radiator and heater hoses, simple push-on & pull-off action, popular sizes 3/16 inch , 3/8 inch , 1/2 inch , 5/8 inch , 3/4 inch and 7/8 inch ..
  • The fuel line disconnect tool kit is made of aluminum alloy and plastic steel,and this 22pcs fuel air conditioning line disconnect set can stand up to years of use..
  • The master quick disconnect tool kit for automotive ac fuel line,offset for hard-to-reach areas, fits 5/16 inch , 1/2 inch , 3/8 inch , 5/8 inch , 3/4 inch , 7/8 inch ,4 colored quick ac fuel line quick disconnector 3/8 inch , 1/2 inch , 5/8 inch & 3/4 inch ..
  • Our transmission line disconnect tool for Ford comes with a heavy-duty blow-molded carrying case,helps to protect and store various parts conveniently.High quality products, 100 percent new.If there is any problem in the process of purchase or use, please contact us to solve i....
Check Stock

DOZYANT 15 Foot 3/4inch ID Natural Gas Hose with Quick Connect/Disconnect Fittings for Generator, Construction Heaters and More NG/Propane Appliance

  • 3/4" ID Natural Gas Hose Connector with a 3/4" Male QD Plug X 3/4" Male Pipe Swivel via Quick-connect Adapter.
  • Used to connect Natural Gas or Propane appliance to a permanent gas supply via quick disconnect.
  • Perfect for connecting your generator to natural and LP gas supply, also used for high BTU output outdoor cooking appliances, construction heaters, and standby generators.
  • The male quick disconnect plug fits into quick disconnect adapter (3/4" quick connect x 3/4" female pipe thread). It shuts off the flow when pipe is removed.
  • Quick disconnect hose assembly. Rubber hose and 100% solid brass fittings, well made and sturdy.
Check Stock

Dixon DCP2144B Brass Air Chief Industrial Interchange Quick-Connect Air Hose Fitting, Plug, 1/4\ Coupling x 3/8\ Hose ID Barbed

  • Air Chief industrial interchange quick connect coupler for connecting directly to a hose with barbed hose ID end for a greater hold on the hose.
  • 1/4" Air Chief industrial interchange quick connect plug with a 3/8 "ID barbed hose end.
  • Valveless construction allows flow when disconnected.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Interchanges with MIL-C-4109F/A-A-59439 specifications for quick-disconnect couplings for hoses and portable pneumatic tools, but not water or fluids, at maximum working pressures up to 232 psi (16 bar).
Check Stock

NEXADD Fuel Line Pliers Set 4Pcs | Hose Remover Pliers | 9 Inch Fuel Filter Caliper | Hose Pipe Clamp Clip | 80 Degree Disconnect Pliers Set for Auto Maintenance with Storage Case

  • NexADD 4Pcs Fuel Line Pliers Set Does It All★- Eliminate the problems associated with removing fuel line connectors or undo fuel lines.This set includes 4 Pcs fuel line hose pliers,a hose remover pliers, a 9'' fuel filter caliper, a hose pipe clamp clip and 80 degree disconnect pliers . You’ll save about 30 percent when you buy NexADD fuel line pliers combo kits instead of buying each tool . Just Add to Cart!.
  • Hose Remover Pliers★-The best tool for removing hose clamps for fuel and small water hoses.To remove hoses from transmission,rubber hoses connect to cooler lines. Even if can't fit both sides (hose/tube)between fitting and hose.Slide one side in and work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm)..
  • Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum openin....
Check Stock

10 Pieces Airbrush Adapter Set Includes Airbrush Adapter Kit Airbrush Quick Release Disconnect Fitting Connector Female Couplings Nylon Braided Airbrush Hose for Air Compressor and Airbrush Hose

  • What you receive: there are 10 pieces in this airbrush adapter set, including 7 pieces 1/8 inch and 1/4 inch BSP male and female couplings in different types, 1 piece airbrush quick disconnect coupler, 1 piece 1/8 inch BSP male fitting and 1 piece 6 ft nylon braided airbrush hose for connecting to airbrush end, abundant content and sufficient quantity meet your airbrush hose use.
  • Sturdy structure: our airbrush adapter kits are made of quality metal material, which endows these accessories with sturdy and strong structure, makes them not easy to break or deform, anti-corrosion and anti-rust, durable to provide you long term application.
  • Simple to assemble: the quick release airbrush fittings are easy to connect and disconnect airbrush without screw trouble, with smooth threads which are convenient for you to assemble in several seconds, saving you much effort and time.
  • Compatible with: the airbrush quick disconnect set is compatible with most Master, Pointzero, Iwata, Hansa, Sparmax, Grex airbrush and most China airbrush, able to satisfy your multiple replacing needs and practical to use.
Check Stock

Paintball Remote Coil Hose with Quick Disconnect and 3000psi Pressure Gauge, HPA High Pressure Co2 Adapter Hose

  • Paintball PCP Coil Remote Hose Line with Quick Disconnect.
  • Heavy Duty Remote Hose/Line With Quick Disconnect that get bulky tank off your paintball gun with a coil remote!.
  • Unlike braided stainless steel hoses, the coil will expand and contract to fit the position you're in.
  • Rated for 3000 psi use, so you can be sure you won't have any blown ends, It will work with ANY screw-in CO2 or compressed air / N2 tank!.
  • Now with more flexible coil-Reduced number of coils reduces catching on vests and packs-Field tested with great results..
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
Check Stock

15 Pieces Airbrush Adapter Set Airbrush Quick Release Coupling Disconnect Adapter Kit Airbrush Quick Release Disconnect Fitting Connector Set Female Connectors for Air Compressor and Airbrush Hose

  • Details of package: there are 7 pieces different types of 1/8 inch and 1/4 inch male and female connectors, 2 pieces quick disconnect connectors....
  • Metal material: these airbrush adapter kits are made of quality metal material, which feature sturdy construction and long lasting performance, they....
  • Designed for: the adapter attachment is designed for spray gun, air hose and compressor, when you need to use it for multiple spray guns, there is no....
  • Simply designed: our airbrush adapter kit is a simply designed spray gun connector for connecting the air hose to the spray gun, which is easy to use....
  • Compatible with: these spray gun quick disconnect kits are compatible with most Master, Pointzero, Iwata, Hansa, Sparmax, Grex spray guns and most....
Check Stock

Air Venturi Air Gun Hand Pump (‎Hand Pump)

  • Pumps to 4, 500 psi/310 bar (always use the correct pressure rating for your gun).
  • Flexible 21" micro-bore hose (inside a spiral steel cage).
  • Integrated moisture catch on output end of hose.
  • Integral manometer - oil-filled air pressure gauge.
  • Includes test plug, accessory pack with spanner wrench and 2 rebuild kits.
Check Stock

3/4" Garden Hose Quick Connector Value Pack

  • 3/4 in.*3/4 in. NH Thread,Excellent value and quality, It’s perfect for garden hoses and power washer, RV, boat or anywhere there’s a standard 3/4″ garden hose connection,work with your camper, sprayers,nozzle, tree soaker etc.★Easy to Connect and Disconnect★..
  • NOTICE:Used for garden watering tools only,Used with a pressure under 60 psi..
  • PLG Brand Without flow stopper,KEEP water flowing.Made from High Quality Aluminum, Meet EU Aluminum Quality Standards,Very LOW Lead Content(Ava<.
  • The garden hose connectors help you quick connect & disconnect the hose in the cold weather,No need unscrew and screw on the hose..
  • No leaks,quick connect hose fittings,Durable metal construction,Comfortable rubber grips.Includes 2 female quick connects and 2 male quick connects,Quickly Attached..
Check Stock

Universal 1/8'' NPT Male Thread to 8MM Female Quick-Disconnect Connector Adapter, Black Zinc Plated Copper, PCP Paintball Charging Fittings with Sealing O-Ring

  • Material - Made of high-quality black zinc plated copper, Size: 31mm / 1.22 inch Length, Rated to 4000 PSI, Max Pressure: 6000 PSI, Temperature Resistance: 1000 ℃..
  • Accuracy - NC machining, accurately, suitable for 8mm Female converter and 1/8" NPT female thread, supplied with sealing ring washer, reliable and no leakage..
  • Easy to Operation - Simply connect each fill adapter to the quick disconnect air tool fittings, high pressure resistance，this is one of the needed items to have in your parts kit..
  • Quick Connect Adapter - Quick disconnect a male to female thread air tool fittings, will allow you to move air from one tank to paintball, to move air in a big bottle to a smaller more portable bottle, or connect to air tanks when used with two fill adapters..
  • Application - Inflatable cylinder fittings connect to high pressure hose, compatible with PCP airsoft, air gun, paintball, paintball tanks and SCBA tanks filling etc..
Check Stock

Master Airbrush Brand Airbrush Quick Release Disconnect Coupler with Plug 1/8 in BSP Male and Female Hose Connections

  • Master Airbrush Brand Airbrush Quick Disconnect Coupler with 1/8" male and female fittings.
  • The quick-release action allows you to quickly change airbrushes when you use multiple airbrushes with a single air supply hose.
  • Automatically shuts off air flow from the hose when disconnected.
  • Screws onto most airbrushes and hoses with 1/8" size fittings such as Devilbiss and Master Brand airbrushes.
  • Does not fit: Badger Paasche Aztek Testors Thayer and Chandler.
Check Stock

Fuel Line Disconnect Tool Set Master Quick Disconnect Tool Kit for AC Fuel Line Transmission Oil Cooler Line Disconnects Compatible with Most Ford Chevy GM Models Red

  • [WIDELY USE AC & FUEL LINE DISCONNECT TOOL SET]-- A comprehensive disconnect tool set for separating automotive ac hose and fuel lines, work for almost fuel lines, air conditioning lines , air and oil pipes , radiator and heater hoses , simple push-on & pull-off action. Widely applied for domestic and foreign hoses and automotive lines, compatible with Most GM Ford Dodge Mazda and Chrysler..
  • [DIFFERENT COMPONENTS & SIZES FOR MUTI-USES]--The fuel line removal tool set includes 6 pcs of color-coded ac disconnect fuel line removal tool set , 7 pcs of removing ac & fuel line disconnect fittings , 4 pcs of quick ac fuel line remover , 2 pcs of oil cooler line remover as well as scissor fuel line disconnect tool , cf fuel line w/hair pin connector and rubber band. Various common tools are easy for operation to cover different purposes..
  • [DURABLE MATERIAL & High Quality]--The 25 pcs fuel line disconnect tool kit made of high-quality aluminum alloy and plastic steel is durable . Each tool , even the carrying plastic case is designed and tested for strength and longevity..
  • [HANDY DESIGN & EASY STORAGE]--All most popular cooler line removers for for fuel and air conditioning lines are set in unique and organized locations in a blow-molded case for avoiding mispla....
Check Stock