Top Air Fitting Reviews

Hydrofarm RS5GALSYS Root Spa Deep Water Culture Bucket System, 5 Gallon, black

  • 8" bucket basket to hold your choice of growing medium.
  • Multi-purpose air hose delivers air from the pump to the bottom of the bucket.
  • Air pump to oxygenate your water to encourage root growth.
  • Includes ½" grommet fitting, ½" elbow fitting, ¼" black tubing, Clay pebble media sold separately.
Check Stock

Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2

  • Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
  • Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
  • Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
  • Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
Check Stock

ARB 12 Volt High Performance Twin Air Compressor & E-Z Deflator Airline Tire Inflation Kit & Air Locker Manifold Kit

  • Boost Projects Custom Kit Includes: ARB 12V High Performance Twin Air Compressor & E-Z Deflator & Airline & Tire Inflation Kit & Air Locker Manifold....
  • Air Compressor Kit Includes: Fully assembled and tested air compressor (12V). Complete wiring loom w/ Air Locker solenoid plug-in terminals.....
  • Manifold Kit Includes: Manifold body with mounting bracket. 2x 1/8_ѝBSPP ports for installation of up to 2 x Air Locker solenoids. 2x 1/4_ѝ NPT....
  • E-Z Deflator Kit: The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing....
  • Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the....
Check Stock

JACO Dually Tire Air Chuck – 1/4″ NPT | Dual Head Straight Foot (Closed Flow)

  • Dual Head – this straight, extended dually tire air chuck features dual heads designed for use on both inner and outer facing tire valve stems on dual wheel setups such as dually trucks, semi trucks, trailers, RV, motorhomes, and campers..
  • Extended Reach – this straight dual air chuck measures 6.7 inches long, making it easier to access hard-to-reach tire valve stems. Built to last from solid steel & trusted by mechanics and truck drivers everywhere..
  • 1/4 inch Fitting – the end of the tire chuck features a precisely machined 1/4 inch F-NPT (female) threaded fitting, making it compatible with most air compressor hoses & accessories..
  • Lifetime Warranty – all JACO tools come backed by a 100% Lifetime Warranty that covers all performance and manufacturing issues, so air up your dually tires with confidence using a quality JACO air tool!.
Check Stock

Hydrofarm RS5GAL4SYS Hydroponic Grow Kit Multi-Purpose Hose and Air Pump, Black Culture Root Spa 4 Each, 5 Gallon Buckets, Deep Water System

  • HYDROpONIC 4 BUCKET SYSTEM: Deep water culture system designed to provide a great growing environment for your plants.
  • 8-inch bucket basket to hold your choice of growing medium that has a watertight seal to guarantee no leaks.
  • AIR HOSE: Multi-purpose air hose delivers air from the pump to the bottom of the bucket.
  • AIR PUMP: Air pump to oxygenate your water to encourage root growth.
  • Pumping raw air into the nutrient solution is cost-effective.
  • WHAT'S INCLUDED: System comes with 4 5-gallon bucket, bucket basket, multi-output air pump, multi-purpose air hose assembly, 0.5-inch elbow fitting, 0.5-inch grommet fitting, and 0.25-inch black tubing.
  • EASY TO USE: Easy to use, inexpensive, and forgiving system with no need for air stones.
  • Pumping raw air into the nutrient solution is cost-effective..
Check Stock

Oatey 30863 Heavy Duty Solvent Cement, 8 Oz, Can, Liquid, Clear

  • Heavy duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12” diameter with interference fit, up to 18” for non-pressure.
  • Low-VOC solvent cement meets California South coast air quality management district (SCAQMD) 1168/316a or baaqmd method 40 and various environmental requirements.
  • Heavy Duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12î diameter with interference fit, up to 18î for non-pressure.
  • Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD).
  • Thick formula fills gaps in large diameter pipe and loose fitting joints.
  • Recommended for potable water, pressure pipe, conduit and DWV.
  • Recommended application temperature 40°F to 110°F / 4°C to 43°C.
Check Stock

Air seat blow gun kit,Heavy Duty Truck cab air blow gun Cleaningwith 9 Meter Long Coil and 2 interchangeable nozzle tips -Air Duster Blow Gun Kit

  • This Air Blow Gun Kit is Professionally Manufactured and Designed for Efficient Blowing of Air, Cleaning Parts and Surfaces.Wide Use on Trucks with Air Ride Seat Systems, for Car Lorry Truck, for Truck Dust Blow.
  • It helps with dust, debris, dirt in the vehicles..
  • The air blow gun kit is convenient for drying off fluids, clearing debris, and much more.2 interchangeable nozzle tips, for different places, spacious or narrow spaces.Plastic hanging hook, easy to use and convenient for placing and storage.Includes 9 Meter Long Coil coiled,burst pressure up to 120 PSI, meet your normally use..
  • T-Shaped Quick Connector With Bronze Ball Automatic Shut-Off Valve,it contains teflon tape, which can effectively avoid fitting leak air.
  • PU Hose, good elasticity, It won't break, even if the temperature is below zero.
  • Complete kit splices into air seat supply.
  • Blow gun kit Also known as air blow gun kit,air seat blow gun kit , Truck Dust Air Blow Gun Kit ,truck cab air blow gun kit, blow gun air tool kit.
  • Include Air Blow Gun, Brass Tee Fitting, Long Nozzle, Air Hose, Teflon Tape.comes with 90 DAY limited warranty.
Check Stock

RAINPAL SSBF010 Stainless Steel Bulkhead Fitting (Female 3/4\ NPS, Left Handed Nut) (2)

  • Size and Number of Pieces: 1/4" 10pcs 3/8" 10pcs 1/2" 10pcs Tube OD.
  • Working Pressure Range: Maximum up to 150PSl. Working Temperature Range: '-40℉ to +200℉(-40℃ to +93℃).
  • Applications: Used with SAE J844 Type A and Type B nylon tubing in air brake system, or in cab air controls, except for where temperature is under -40℉(-40℃) or above +200℉(+93℃)or where battery acid can drip on tubing..
  • Advantages: Meet D.O.T.FMVSS 571.106 air brake specifications. Meet functional requirements of the SAE 246 & SAE J1131. Machined from CA360 brass. Easy to assemble (no tube preparation or flaring required.) Built in tube support. Can be used with copper tubing by NTA body with long nut and spherical sleeve. Insert should be removed.
  • Assembly Instructions: 1. Cut tubing as flat as you can. Maximum 15°angle is allowed. 2.Check the port of the mating part free of burrs or debris. 3.Slide sleeve and then nut on the tubing. 4. Insert the preassembled fitting into the tubing and the tubing should be bottomed to the seat of the fitting. 5. Tighten the nut by wrench until one thread remains visible of the fitting body..
Check Stock

GasOne Head Banjo High Pressure Propane Burner 10 in Heavy Duty

  • Includes - Burner Head, Orifice, Air Controller & 0-20 PSI adjustable High Pressure Regulator and Hose.
  • BRASS FITTING ORIFICE BLOCK - Includes Brass Fitting Orifice block & Air shutter and Spring.
  • HEAT RESISTANT - Cast Iron will not melt easily compared to aluminum construction, Has high heat tolerance.
  • HIGH HEAT OUTPUT - With 0-20 PSI Regulator it produces up to 200, 000 BTU.
Check Stock

H.A.K. PNEUMATIC Air Filter Regulator – ½” NPT Poly Bowl Compressed Air, Water Filter Lubricator Combo | Water/Oil Trap Separator | 0-140PSI | 2 Micron Brass Element

  • PRESSURE REGULATOR: The speed and precision of air flow are controlled by a Regulator, while the air that passes from the Compressor is cleaned by an Air Filter. The Two Brass pipe fitting available..
  • EFFECTIVE AIR FILTER: H.A.K. PNEUMATIC Air Compressor Regulator Filters the moisture and tiny particles from the air to preserve air tools including spray guns, nailers, airbrushes, tyre compressors, inflators, and pneumatic equipment. The air flow direction has mentioned in the images. Air in from Left side and get out from right side..
  • EASY TO INSTALL This Pressure gauge comes with Good Impact Locking Composite Knob Inlet Outlet Port to Indicate Position Circulation. Compressed Air Gas Water Filter also have Two 1/2" Brass Pipe Fitting Straight Connector Adapters and Tread seal Teflon tape..
  • AUTO LUBRICATION & PRESSURE RANGE: The lubricator plate allows atomized oil to be delivered to lubricant air tools to improve durability and work efficiency. The Pressure range of our Pressure Regulator is 0~140PSI & Rated flow is 500L/MIN. There is an option of adjusting the air pressure..
  • CUSTOMER'S SATISFACTION: We guarantee everything we make. Our Primary Priority here at H.A.K. PNEUMATIC is your happiness &100% Satisfaction, which means we stand by our Air Filter....
Check Stock

Cen-Tec Systems 94192 Quick Click 16 Ft. Hose for Home and Shop Vacuums with Multi-Brand Power Tool Adapter for Dust Collection, Silver, Feet

  • ...and external connections for dust collection.
  • The highly flexible commercial grade vacuum hose has a smooth interior to resist clogging with large profile debris while supplying superior airflow. Airflow to the tool can be modified as necessary for suction control using a swivel air relief feature built into bayonet fitting.
  • Comes with quick click system for connecting to the exhaust port on all major brands of hand held and stationary power tools. A collar with clip ring, a bayonet fitting with a 1" soft TPE fitting, and a second bayonet with a soft 1. 50" TPE fitting are designed to accept and hold exhaust ports designed to fit the hose internally or externally as demanded by the power tools design. Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool.
  • The soft molded TPE fitting measures 1. 00" on the inner diameter and has four concentric rings to hold firmly to the power tool. For power tools with a female connection the 1. 00" soft TPE part measures 1. 40" on the outer diameter. The soft rubber like feel and taper of the fitting insures a positive tool forming fit.
  • Includes a second bayonet with a soft molded TPE fit....
Check Stock

Diversitech GG-1 Drain Gun for A/C Condensate Lines, Charcoal Grey

  • LIGHTWEIGHT AND PORTABLE TOOL: This Drain Gun weighs in at 3 oz. and is designed to blow out condensate drain lines instantly. No need for carrying heavy air or nitrogen tanks..
  • AIR POWER: This air blower blaster is ready for use after insertion of a Swoosh CO2 cartridge. With the press of the trigger, the gun releases 800 psi (max working pressure 1200 psi) of oil free food grade air..
  • TAPERED AND FLEXIBLE FITTING: Each unit comes with a fitting to work on 3/8" - 3/4" drain openings. Its flexibility allows you to maneuver through cabinets, coils, and those hard to reach drains..
  • The drain gun uses carbon dioxide and is completely safe for use in the environment. It is the perfect solution to choose instead of the environmentally unfriendly practice of using refrigerant to clean the drain line..
  • EASY TO USE: With clear instructions, reduced labor costs, and time saved, this A/C cleaning tool will become any HVAC technician's new best friend..
Check Stock

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

  • UNIVERSAL QUICK COUPLER - The 1/4'' NPT universal couplers (male and female) which fit Industrial (I/M), ARO (A) and Automotive (T) so you do not worry about whether it is fitting or not. Heavy duty steel air fittings are ideal for general purpose applications and the brass has good solid and durability..
  • SWIVEL QUICK PLUGS - The special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
  • HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
  • TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe ....
Check Stock