Top Adjustable Round Die Reviews

uxcell C Hook Spanner Wrench Collet Chuck for 55-62mm Round Nut, with Red Non-slip Handle

• ✿Die Handle Wrench: This die holder wrench can be used to make and repair threads, clamping range: M22-M26 / 22mm-55mm..
• ✿High-Quality Material: Die stock handle wrench is made of high-quality tool steel, sturdy and durable, the surface is polished and chrome-plated, rust-resistant and corrosion-resistant..
• ✿Wide Range of Application: Die wrench handle can be used for surface treatment of low-carbon steel or aluminum materials, widely used in construction, car repair, DIY home decoration projects, factories, etc..
• ✿Package Contains: 1 x round die stock handle wrench, total length: 19.5 inch / 495mm, fixed by 5 adjustable screws..
• ✿About Service: We are committed to providing customers with high-quality products. If within 30 days you are not 100% satisfied with the product, such as buying the wrong size, please feel free to contact us, we will within 24 hours provide you with a satisfactory solution..

Century Drill & Tool 92913 Rethreading Die, 5/8-11NC

• 【Round Die】- Thread size: M6 x 1.0mm.
• Fine grinding. Made of alloy steel, hardness and wear-resistance for long service life..
• 【Application】- Round dies are suitable for general purpose threading. Can process, correct or clean the external threads. Ideal for maintenance and repair work..
• 【Features】- Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic..
• 【Easy To Use】- The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened..
• 【Tips】- It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread..

Ultimate Support JS-MCRB100 JamStands Series Round Base Microphone Stand

• Scratch-resistant, powder-coated black finish.

Zmoon Led Round Light Bar 2PCS 4.5\ 140w 14000LM Flood Light Pod Off Road Fog Driving Roof Bar Bumper for Jeep,SUV Truck, Hunters

• 14 Led Light Bar Chips: 4.5in Round led light bar uses advanced 14 LED chips provide 14000lm,6000k super bright white light, the brightness is far more than similar products of 6 chips, 9 chips. Allows you to see the left and right clearly anytime..
• IP67 Waterproof: Zmoon 4.5in led light bar adopts waterproof die-casting aluminum housing and advanced sealing technology,perfectly solves most of the easy water ingress problems encountered in use.The Rustproof and shockproof function,protect the led light bar from rain,wind and sand. This will keep the led light bar clear and bright at all times, which is safer for the driver..
• High Illumination: Round led light bar spot lights bring further lighting distance and wider view area,can be placed on the bumper or the roof of the vehicle as driving lights or backup lights..
• Adjustable Bracket & 50000 Hours Long Lifespan: Round led off road light bar with adjustable mount bracket,can see different direction clearly.Maximizes surface area for heat dissipation,enhance long lifespan up to 50000 hours..
• Application: The 4.5" led round light bars with DC 9-30v working voltage,fits for Off-Road,Heavy Duty,Jeep,SUV,ATV,UTV,Truck,Car,Boat etc..

uxcell Tap and Die and Drill Bit Set M14 x 2 Left Hand Thread Milling Tap and Round Die 12mm Cobalt High Speed Steel Twist Drill Bit

• Compatibility: M14 x 2 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
• Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
• Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
• 12mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
• Tips: Recommended feed rate: general steel: 6-15m/min.
• cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

• Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
• Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
• Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
• 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
• Tips: Recommended feed rate: general steel: 6-15m/min.
• cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..

Bead Roller Round-Over Dies Commplete Set Cr12

• 1.Material:Cr12, Rockwell Hardness = 40 HRC.
• 2.Radius Dies Includes 4 piece set: 5/16 inch radius die set 1/2 inch radius die set 1 inch radius die set 1-1/2 inch radius die set.
• 3.Round-Over Dies can produce smooth, even, large-radius edges in steel and aluminum.
• 4.The Bead Roller Dies Fits for Most Bead Rollers With 22mm Shafts.
• 5.For Radius Edges of Sheet Metal,Bead Roller Sheet Metal.

Morse Cutting Tools 16171 Ambore Mighty Bite Drill Bits, 4 Flutes, High-Speed Steel, Black and Gold Finish Hole Enlarger, 1/2\ Size

86 Piece Metric and SAE Standard Tap and Die Bearing Steel Tools Set, Titanium Coated with Metal Carrying Case Amazing Tour

• ...iece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
• ➤[Package include]: 17xTaps for Internal Threads.
• ➤[Tap and Die Sizes]: Coarse Thread (NC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
• Fine Thread (NF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.

FPL #3-45-S Sliding Glass Door Replacement Mortise Lock, 3-11/16” Screw Holes, 45 Degree Keyway

• Easily replaces many vinyl, aluminum, and wooden sliding door mortise locks (See dimension photo).
• Durable all steel mortise lock- No die-cast zinc components.
• Round end face plate, Adjustable hook, 45 degree hub, 3-11/16” Screw holes.
• Package includes mortise lock, keeper / strike, and installation hardware.

ele ELEOPTION Electric Cutter for 3.5"x2" Card, Automatic Business Card Cutter Binding Machine-110V

• The desktop CR80 all metal manual PVC card die cutter, cutting size is 2-1/8"x3-3/8" (86×54mm) Standard CR80 (ID-1) with rounded corners. Cutter life-span is more than 100,000 times and cutting thickness is less than 0.03inch(0.8mm). It is a great tool for both professional and occasional users..
• Long arm handle allow powerful cutting with ease. All heavy-duty metal base, steel blade with excellent edge, long arm of force power-saving Handle..
• Blade gap is 0.0003-0.0006inch (0.008-0.015mm), round four corners of the card at one time. Easy and accurate positioning and cut neatly..
• The business card cutter is designed with hardened steel cutting die, die-cast steel base and long arm of force power-saving design handle, which can help you cut out more easily than other die cutters..
• With this all metal Card Round Corner machine, you can cut the business cards, credit cards, membership cards, driver's license cards, PVC ID cards and wallet size photos..

Proline MS235BK Round Base Mic Stand 2 Pack Black

• MS235BK Round Base Mic Stand 2 Pack Black.
• The MS235 Round Base Microphone Stand features die-cast metal clutches and a heavy-duty die-cast base that keeps the stand where you set it.
• ProLine microphone stands safely and securely maintain the position you set for your microphones to capture the perfect sound -- in the studio or during live performance.
• This item features two MS235 stands in black.

Industrial Vintage Pool Table Light Fixture-Ruanpu 3 Lights Rope Island Light Edison Chandelier Fixture with Special Billiard Ball Decoration in Black Finish

• Retro attic Ceiling light LED dimming Die cast aluminum Ceiling lamp Remote control Pendant lights Height adjustable Adjustable brightness Color temperature 3500K 6500K adjustable Round shape E27 bar counter kitchen balcony Hanging lights decoration.
• 【Bulb Base Compatible with 3 Lights :】E26. Note: Bulb Not Included..
• 【Product Size:】Fixture Width is about 47.24’’(120cm), Chain/Cord length is about 41’(105cm), adjustable..
• Pendant light is ideal for a variety of spaces, from farmhouse pendant lighting for kitchens to pendant lights for bathrooms..
• Please rest assured that we use global logistics for delivery and you will receive your parcel within 5-10 working days after you place your order, so there is no need to wait too long..