Top Adjustable Inlet Pumps Reviews

Replacement Whirlpool Washer Drain Pump 280187

  • Drop-In Replacement Pump 280187. Exact same Fit & Function. Do NOT buy from “Global Solutions USA” who is not an authorized seller.
  • Manufactured by a Whirlpool certified pump factory. They make many pumps for Whirlpool.
  • Motor in this pump is fully encapsulated inside the grey plastic therefore no winding wire is exposed. This is a better & SAFER design than original.
  • Inlet & Outlet positioned 30 degrees apart, exactly the same as original.
  • Complete assembly, including motor, filter, and inlet / outlet plastic housing.
Check Stock

LubriMatic 30-114 Continuous Flow Air Operated Grease Gun

  • Continuously pumps grease while trigger is depressed.
  • 2-way loading: 14 oz. cartridge or suction load.
  • Head cap port for adding air bleeder valve or bulk loader fitting.
  • Capable of 3-way loading: 14 ounce cartridge bulk or suction.
  • Recommended inlet pressure 90 PSI and dispenses 5 ounces per minute.
Check Stock

Intex 26004E Above Ground Swimming Pool Inlet Air Water Jet Replacement Part Kit; Includes Plunger Valve, Strainer Connector, Strainer Grid, etc.

  • INCLUDED WITH REPLACEMENT PART: The replacement part set includes 1 plunger valve with O-ring (10747), 2 strainer connectors for 1.25-inch fitting (11070), 2 strainer grids (11072), and 1 pool inlet air nozzle set (12354).
  • INCLUDED WITH POOL INLET: Pool inlet air nozzle set includes the jet exterior, O-ring, fittings compatible with other set parts.
  • COMPATIABLE WITH: This pool jet replacement part kit works with pool filter pumps with 1,050 to 1,900 gallons per hour flow rates. You can use these pool jet replacement parts with any Intex above-ground pool.
  • INSTALLATION: Plunger valves install in the side of your Intex pool and connect with your Intex hose fitings.
  • WATER CIRCULATION: Better circulate water through your pool with the help of this Intex 26004E Above Ground Swimming Pool Inlet Air Nozzle Replacement Part Set.
Check Stock

F-AL-3/8, 3/8″ Threaded Female Tank Filter for Mosquito Misting Systems

  • ...ater pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
  • {Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/or 3/8” Push Lock.
  • {Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/or 3/8” Push Lock. MC12020.
Check Stock

Chengu Fuel Pump Lawn Mower Compatible with 491922 691034 692313 808492 808656 808281 Fuel Pump for Outdoor Garden Lawn (4 Pcs)

  • ... Compatible with: the mower fuel pumps are compatible with 491922 691034 692313 808492 808656 808281 lawn mowers, large compatibility makes them applicable for different lawn mowers, if you have a need, take them home with confidence.
  • Size Information: the fuel inlet, fuel outlet and vacuum holes of the lawn mower fuel pump measure about 8 mm in diameter, and the distance between the two holes on the front side is approximately 70 mm.
  • Check the dimension carefully before an order.
  • Enjoy the Convenience: the fuel pumps will be essentials if you have your own lawn mower at home, simple operation process will not take you much effort and time, but can bring you much more convenience, making your gardening work easier.
  • Replace or Share: there are 4 pieces of lawn mower fuel pumps in each package, you can share them with family, friends or others who have the same need as you, or store them for use and regular replacement, extending lawn mower's service life.
Check Stock

Residential Misting System- Made in USA Pump- 200 psi Mid Pressure Patio Misting System-12 Nozzles Misting System

  • {Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
  • {Pump Specifications} 110 Volt Kit Includes: - 200PSI Booster Pump with Plug (110v) - 50ft Flexible Tubing – Calcium Inhibitor Filter - 12 Brass/Stainless Steel Mist Orifice Nozzles - 0.012'' - 11 - Push Lock Mist Tees - 1 - Push Lock End Mist Elbow - 6ft Feed line with 3/4 Garden hose connector - Plastic Clamps.
  • {Installation} - Push Lock Fittings - Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
  • {Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock.
  • {Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock. MC12020.
Check Stock

Autu Parts Carburetor Gaskets for BARRY GRANT BG400 BG280 BG220 FUEL PUMP SEAL KIT

  • Carburetor Gaskets for BARRY GRANT BG400 BG280 BG220 FUEL PUMP SEAL KIT.
  • Main Shaft Seal,End Plate Seal,Bypass Valve Oring,Inlet and Outlet Seals.
  • Kit used in :For Barry Grant 400,280,220 fuel pumps and for Magnafuel pumps..
  • High product quality, fast delivery and easy after-sales services.
  • If there is any uncertainty, please contact us and we will reply within 24 hours..
Check Stock

Replacement Hose for Above Ground Pools 1.25' Diameter for Models 1,000 GPH, 530 GPH, and 330 GPH,57' Long Filter Pump Hose. (2)

  • ▶ Product introduction: Made of high quality polyethylene material, contains 2 pieces of pool hose leak proof replacement accordion pipes [57″ long, 1.25″ diameter], 4 pieces of 304 stainless steel hose clamps..
  • ▶ Easy to install: plug in, hand tighten, done..
  • ▶ Quality description: The hose is super durable, super pressure resistant, and the hose clamp is rust-proof and corrosion-proof..
  • ✔ Compatibility: Hose is suitable for 28xxx series 330 GPH(601), 530 GPH(603), 1,000 GPH(637) filter pumps, and various sizes of filter pumps with 1.25″ Inlet/outlet..
  • ✖ Note: This product is not suitable for sand filter pumps with 1.5″ diameter screw-in nut connections..
Check Stock

Appliancemate WR57X10032 Refrigerator Water Inlet Valve apply for GE Hotpoint Refrigerator

  • PARTS NUMBER: WR57X10032 Refrigerator Water Inlet Valve apply for GE Hotpoint Refrigerator..
  • Replaces Part #’s: WR57X10040, WR57X10064, 880070, PD00001042,AP3192626, PS304374, EAP304374.
  • Package includes: 1 x WR57X10032 Refrigerator Water Inlet Valve. Size: 11”x8”x3.5”.
  • Fixes Symptoms: Will not drain, Pumps but will not spin, Noisy, Leaking..
  • PREMIUM QUALITY-The replacement part is made from durable high quality material and well-tested by the manufacturer.Non original aftermarket part. Fits OEM Standards!.
Check Stock

Zoeller 284-0004 Non-Automatic Cast Iron Single Phase Submersible Sewage/Effluent Pump

  • Pumps up to 4800 gallons per hour,, pumps water up to 25 vertical feet.
  • 1/2 HP Cast Iron Sewage Pump with Vertical Float Switch.
  • 19 in. x 30 in. 30 gallon structural foam basin, 4 In. rubber inlet hub fits DWV schedule 40/80 pip, 2 In. discharge and vent, built-in torque stops.
  • Premium structural foam cover with 8 bolt configuration, air tight molded reusable PVC seal.
  • Check valve features, heavy duty rubber boots, stainless steel clamps, full flow design, 2 in. connections.
Check Stock

Danner Manufacturing, Inc. 5430 05430 Pressurized Pond Filter, 1000 Gallons, Black

  • Detachable Hose Assembly Module allows Quick Shutoff and Easy Disconnection of Hoses for Faster, Easier Filter Maintenance.
  • Large Capacity Housing and Reusable Biological and Mechanical Filtering Material Help Maintain a Healthy Environment for Your Fish and Aquatic Plants.
  • Reusable Foam Filter Pad Provides Effective Mechanical Filtration.
  • Maximum Efficiency and Minimum Power Consumption When Used with Pondmaster Magnetic Drive Pumps.
  • Ideal for Small to Medium Water Gardens, Barrel and Container Ponds.
  • Compact filtering system that offers both mechanical and biological filtering.
  • Ideal for ponds up to 1000 gallons in size.
  • Requires 3/4-Inch ID tubing for inlet connection, sold separately.
Check Stock

JMCUHYD Air Hydraulic Pump 10,000 PSI 10 Ton Porta Power Hydraulic Air Foot Pump Control Lift with Air Line Lubricator Hose…

  • [ PRODUCT PARAMETER ] Maximum adjustable pressure: 10,000PSI. Input air pressure：102-120 PSI (standard shop air supply）.
  • [ CONNECTOR SIZE ] Air inlet thread--1/4” NPT, Oil outlet thread--1/4” NPT.
  • [ DURABLE OIL TANK ] Features a 98 cubic inch capacity, the reservoir is made of corrosion-free aluminum alloy..
  • [ AIR LINE LUBRICATOR ] Air Hydraulic Pump has Air Line Lubricator with Quick Connect Coupler, EXTEND this AIR HYDRAULIC FOOT PUMP service lifetime and performance..
  • [ WIDE APPLICATION ] Hydraulic dump trailer pumps are widely used in the lifting and loading and unloading of heavy machinery, automatic repairs, oil drilling platforms, and machine maintenance..
Check Stock

HOLLEY SNIPER 140 GPH ELECTRIC FUEL PUMP.375" NPT,4 AMP MAX DRAW,GAS,UNIVERSAL

  • Brand New Holley Sniper 140 GPH Electric Fuel Pump, 3/8" NPT Inlet/Outlet, 4 Amp Max Draw, Universal, Compatible with Gasoline (Hollley Part #80000102).
  • Sniper Fuel Pumps are designed for carbureted applications. They come with 3/8" NPT inlets and outlets & 4 Amp Maximum Draw. Precision performance & great looks at a price that will kill the competition!.
  • NOTE: Requires a regulator (not included). These should be used with 12 Volt systems only..
  • Specs: Application: Universal | Bracket Color: Gold | Brand: Sniper | Emission Code: 3 | Free Flow GPH: 140 | Fuel System: Carbureted | Fuel Type: Gasoline | Inlet Size: 3/8" NPT | Outlet Size: 3/8" NPT | Product Type: Fuel Pump.
Check Stock