Top Adjustable Depth Stops Reviews

WEN 4208 8 in. 5-Speed Drill Press

Includes a 1/2-inch keyed chuck and onboard key storage.
Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM.
Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations.
Durable 1/3 HP induction motor develops ample torque and power.
6-1/2 x 6-1/2″ worktable is height adjustable and bevels up to 45 degrees left & right.
Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP..

Check Stock

WEN JN8504 8.5-Amp Plate and Biscuit Joiner with Case and Biscuits & 6530 6-Amp Electric Hand Planer, 3-1/4-Inch

Product 1: Perfect for edge-joining panels, aligning boards, strengthening joints, and more.
Product 1: Adjustable fence helps create biscuit slots at any height or angle.
Product 1: Pre-set stops easily adjust to create slots for standard #0, #10, and #20 biscuits.
Product 1: 8.5-amp motor rotates the 4-inch carbide-tipped blade at 10,000 RPM.
Product 2: 6-amp motor provides up to 34,000 cuts per minute.
Product 2: 16 positive stops adjust the cutting depth anywhere from 0 to 1/8 inches.
Product 2: Make rabbets up to 7/10 inch in size with the included rabbeting guide.
Product 2: Lightweight design weighs in at a mere 6 pounds. Motor:120 V, 60 Hz.

Check Stock

VonHaus Variable Speed Rotary Tool Set with Flex Shaft Stand and Storage Case Including 34 Piece Multi-functional Accessories Tool Bits Set For Cutting Sanding and Polishing

ACCURATE CUTS: Make quick, accurate biscuit cuts for super-strong miter joints, T-joints, butt joints and edge-to-edge/corner joints with the 8.5 Amp....
PRE-SET DEPTH: Pre-set depth stops for biscuit sizes 0, 10 and 20 guarantees accuracy without measuring.
ADJUSTABLE FENCE: Adjustable fence allows the tool to be set on an angle for easily joining mitered pieces.
DUST COLLECTION: Includes a dust port with dust bag for easy clean-up and an unobstructed view when in use.
ERGONOMIC DESIGN: Large, ergonomically designed top grip handle for enhanced comfort. The VonHaus biscuit joiner comes with 1 x 4” blade, the....

Check Stock

Lamello 101402DS Zeta P2 Biscuit Joiner with Diamond Cutter, Drill Jig & Systainer Case

★Zero to 90 degree adjustable fence positions,Adjustable fence allows the tool to be set on an angle for easily joining mitered pieces..
★Pre-set depth stops for biscuit sizes 0, 10 and 20 guarantees accuracy without measuring..
★Flush cuts can be made at 0 degrees without removing fence..
★Includes a dust port with dust bag for easy clean-up.Remove the dust bag and Easy compatible with vacuums.
★Easy to quickly set the fence angle and height, a great tool for beginner..

Check Stock

VonHaus 8.5 Amp Wood Biscuit Plate Joiner with 4\ Tungsten Carbide Tipped Blade, Adjustable Angle and Dust Bag - Suitable For All Wood Types

ACCURATE CUTS: Make quick, accurate biscuit cuts for super-strong miter joints, T-joints, butt joints and edge-to-edge/corner joints with the 8.5 Amp 120V Biscuit Joiner from VonHaus.
PRE-SET DEPTH: Pre-set depth stops for biscuit sizes 0, 10 and 20 guarantees accuracy without measuring.
ADJUSTABLE FENCE: Adjustable fence allows the tool to be set on an angle for easily joining mitered pieces.
DUST COLLECTION: Includes a dust port with dust bag for easy clean-up and an unobstructed view when in use.
ERGONOMIC DESIGN: Large, ergonomically designed top grip handle for enhanced comfort. The VonHaus biscuit joiner comes with 1 x 4” blade, the biscuit joiner is also compatible with all biscuit joiner blades that is 100mm (4”) in diameter with a 22mm bore.

Check Stock

Makita 196094-2 Compact Router Plunge Base

Plunge depth capacity of 1" to 1-3/8" for easy penetration into work piece.
Easy-to-use fine depth adjustment with 3 preset depth stops for added precision.
Conveniently located plunge lock lever for operator convenience.
Removable clear plastic shield engineered to block airborne debris.
Sub-base accepts industry standard template guides for added versatility.

Check Stock

Makita RP0900K 1-1/4 HP* Plunge Router

0" - 1-3/8" plunge depth capacity for easy penetration into work piece.
Plunge depth adjustment lever with 3 pre-set depth stops for added precision.
Oversized ball bearing construction for longer tool life.
Durable flat top design for added convenience when changing bits.
Rubberized contoured handles with built-in switch for better fit and control.

Check Stock

Avlcoaky 1200PCS Bobber Stops Rubber Bobber Stoppers for Fishing Line 6 in 1 Float Sinker Stop Size L M S Available-Yellow

Size M suitable for 1.5# - 3.0# fishing line.
Size S suitable for 0.8# - 1.5# fishing line..
Multi-functional Bobber Stops: The rubber bobber stops is commonly used in keeping floats or sinkers at certain place on fishing line.
It also works well in fixing the depth of the float, must-have accessories for your fishing..
Slip Bobber Stops: The bobber stops for fishing line is great for making various rigs with sinkers and slip bobbers, especially for your crappy fishing, bass fishing and trout fishing..
Rubber Bobber Stops: Soft rubber fishing line stopper, no harm to your fishing line and ensures firmly hold on your line.
Non-slip handle design, helps prevent wires being pulled out and makes it easier to install the stoppers..
User-friendly Bobber Stops: Thread the fishing line through the wire coils, then pull the bobber stops onto the fishing line, and finally fix the stoppers. Just takes seconds to setup, great fishing gift for fishing lovers..

Check Stock

Evolution Power Tools R255SMS+ 10\ Multi-Material Compound Sliding Miter Saw Plus

Designed to cut a wide range of materials without changing blades.
Impressive hi-torque motor, 15 amp saw with adjustable depth and laser precision guidance.
Includes 10 inch blade, dust bag, 10 ft rubber power cord, laser guidance, and quick-release hold down Clamp.
Cut to within +/- 0.5˚ with 0° - 45° bevel tilt and 50˚ - 50˚ miter angles With quick click miter stops at 0˚, 15, 22.5, 30, and 45˚ both left & right..

Check Stock

Mares Mission 3 Compact Gauge Console

The Cressi Mini-Console PD2 is a small scuba diving console that houses the Mini-Manometer Pressure Gauge and the Analog Depth Gauge..
Mini-depth gauge reads to 70 meters (230 feet). Depth indications spaced out in first 12 meters (40 feet) for precise readings during safety stops. Maximum depth indicator..
Pressure gauge dial is color-coded in red, green and blue for instant readability. Reads pressures up to 350 BAR or 5000 PSI..
Both instruments built with chrome-plated brass case for maximum durablity. Compact rubber boot is textured for a sure grip..
Two connection loops, one on each side, for attaching a clip or bungee..

Check Stock

Makita PJ7000 Plate Joiner Blue

Powerful 5.6 AMP motor delivers 11,000 RPM for quick, precise cutting in a variety of woods.
Cast aluminum pivot fence with three positive stops at 0°, 45° and 90°.
Six depth settings with one-touch stops for most common biscuits sizes including #0, #10, and #20.
Large and easy-to-operate cam locks for angle guide and fence adjustments.
Rack-and-pinion vertical fence system engineered for accurate fence adjustments.

Check Stock

Aidelife Wood Biscuit Plate Joiner kit Accessories with 1x4\ Blade,Adjustable Angle and Dust Bag

★Fence tilts from 0 degrees to 90 degrees, Adjustable fence allows the tool to be set on an angle for easily joining mitered pieces..
★Pre-set depth stops for biscuit sizes 0, 10 and 20 guarantees accuracy without measuring..
★Flush cuts can be made at 0 degrees without removing fence. Four-inch blade makes standard-size cuts..
★Includes a dust port with dust bag for easy clean-up. Remove the dust bag and Easy compatible with vacuums..
★Easy to quickly set the fence angle and height, a great tool for beginner..

Check Stock

Sauder Heritage Hill Executive Desk Classic Cherry Finish

This Executive desk has a flip-down drawer front that reveals a slide-out keyboard/mouse shelf with metal runners and safety stops.
Three file drawers with full extension slides hold letter, legal or European size hanging files.
Two file drawers on left side have key lock.
Two small drawers feature metal runners with safety stops.
Overall Dimensions: 70 1/2" (179.1 cm) Width x 35 1/2" (90 cm) Depth x 29 3/4" (75.4 cm) Height.

Check Stock