Top Adjustable Bike Stem Reviews

CXWXC Adjustable MTB Stem 31.8mm 85 Degree - 90/110/145mm Bike Stem Riser for Handlebar - Aluminum Alloy Mountain Bike Handlebar Riser Extender for MTB Road City Bike Bicycle 31.8 x 145mm

【Ideal Stem for Rider】: Can't get comfortable on your bike? Tried too many bike stems? This adjustable stems are a useful way of tweaking your handlebar height and reach, particularly for touring where you spend long hours in the saddle. Our adjustable stem is the best bet to get comfortable.
【Compatibility】: Only Fit for Handlebar diameter 31.8mm (1-1/4''), front fork stem diameter 28.6mm (1-1/8") and is available in a range of lengths – 90, 110 and 145mm. PLEASE CONFIRM YOUR SIZE BEFORE YOUR PURCHASE.
【Material】: The MTB stem is manufactured with a 3D Forged alloy construction that gives strength and control. The durability of this stem is very adjustable with an angle of (-70°to +70°).
【Easy to Install】: Just connect up the original front fork stem. Four bolt bar clamp holds bar securely in position.
【Suitable for Most Bike】: Our bike stems are suited to a wide variety of bicycles, and also to the different types of riders. Ideal for MTB racing and those who take their off road biking very seriously..

Check Stock

Glaray Bike Stem Extender Bicycle Fork Stem Riser 28.6mm Handlebar Extension Head Up Adapter for Mountain Bike, Road Bike, MTB, BMX Glaray003

[ 6 Spacers Included ] The bicycle stem extender is equipped with 6 gaskets, 2 x 20mm, 3 x 10mm and 1 x 5mm, can increase the height up to 145mm..
[ Adjustable Height ] You can freely adjust the stem riser to fit your own height, that will make your riding more comfortable..
[ Easy to Install ] Just connect up the original front bike fork stem..
[ High Quality Material ] The bike stem is built with forged 6061 aluminum alloy material, polished anodized finish, solid and durable..
[ Perfect for Most bikes ] Diameter: 28.6 mm. The bike handlebar extender is suitable for bike with 1-1/8'' threadless headset, please check it before purchase..

Check Stock

FOMTOR Adjustable Stem 0~90 Degree 110mm MTB Adjustable Bike Stem for 25.4mm(1\) Handlebar, Suitable for Most of Mountain Bike, Road Bike, BMX

Only Fit for Handlebar diameter 25.4mm (1''), front fork stem diameter 28.6mm (1-1/8"), Length: 110mm (center distance of the handlebar hole and Bolt).NOTE:This stem do not fit 31.8mm(1.25") diameter handlebar.please measure the diameter of your handelbar before you buy the stem..
Adjustable angle: 0°~ 90°.Maximum height extension 150mm.Help to make your bike very comfortable to ride..
Weight:373g. Constructed of high-strength CNC machined 6061 T6 aluminum alloy.strong and durable..
Suitable for Most of Mountain bike, Road bike, MTB, BMX etc..Please measure your handlebar diameter before you buy this adjustable stem..
Easy to install. How to stall: 1.Loosen the bottom screws use a wrench.
3.Loosen the left and right screws use a wrench.
4.You need to take out the black buttom first when you adjust the angles..

Check Stock

Suncentech Bike Stem 120 Degree Adjustable Bicycle Stem 1\ / 1.25\ Handlebar Riser Adapter for Road Bike, Mountain Bike, MTB, BMX, Cycling (95, Handlebar Diameter 25.4mm/1\)

★ The stem only fit for 28.6mm (1-1/8") fork diameter. Please confirm your bike handlebar diameter is 31.8mm (1-1/4") or 25.4mm (1'') before order!!!.
★ The bike stem is sturdy, well designed and easily adjusted, which is preferable to removing the handlebar stem and exchanging it for one with a different angle..
★ Easy to install, just connect up the original front fork. Four bolt bar clamp holds handlebar securely..
★ Depending on the thickness of your handlebar, you may need to install a shim. Be sure to use glue on threads if any loosen up..
★ Use the adjustable bike stem to achieve a more comfortable riding position, the pain caused by the original setup in shoulders/arms/back had to be corrected. This stem and a riser handlebar did the trick, allow you to sit more upright on bike which is better for your back..

Check Stock

CYSKY Bike Stem Universal 31.8mm and 25.4mm Adjustable ± 90 Degree 145mm MTB Stem Bike Stem Riser Short Handlebar Stem for Mountain Bike Road Bike BMX City Bike Bicycle 145mm

Adjustable angle: -90°angle to +90° angle, can raise or lower the handlebar height to allows you to adjust to a much more comfortable upright riding position.
Universal 31.8mm and 25.4mm handlebar (Built-in bar shim adjustment), Front Fork Stem Diameter 28.6mm (1-1/8"), Length: 145mm, Weight 353g (0.78lb).
Bike handlebar stem constructed of precision 3D Forged aluminum alloy, CNC process no paint loss, easy to clean, sturdy and durable, not easy to deform and rust.
Suitable for most road bikes, mountain bikes, downhill bikes, track bikes, MTB, BMX, DH and so on. Perfect for modifying, DIY and upgrading your bike. Good replacement for your mountain bike.
Package Include: Bicycle Stem ×1, Bike Stem Shim ×1 (31.8 to 25.4 Stem Adapter), Hexagonal wrench ×2.

Check Stock

25.4 Bike Stem Adjustable 0-60 Degree Handlebar Riser Extender for Road Bike, Mountain Bike, MTB, BMX (Only Fit 1\/25.4mm Handlebar) (25.4 x 110mm)

★ Please confirm your bike handlebar diameter is 25.4mm (1'') before order!!! Otherwise, the item is not suitable for your bike..
★ The bike stem is sturdy, well designed and easily adjusted, which is preferable to removing the handlebar stem and exchanging it for one with a different angle..
★ The installation is easy because the specs were accurately represented. There is a "degree of angle" indicator on the adjacent parts to allow you to set your angel correctly. The stem has a opening that allows you to see where the handle bar is positioned..
★ This is a pretty nice riser, good adjust-ability. Depending on the thickness of your handlebar, you may need to install a shim. Be sure to use glue on threads if any loosen up..
★ Use the adjustable stem to achieve a more comfortable riding position, the pain caused by the original setup in shoulders/arms/back had to be corrected. This stem and a riser handlebar did the trick, allow you to sit more upright on bike which is better for your back..

Check Stock

SportRack Alternative Bike Adapter

Carry kid's bikes, women’s bikes and other uniquely shaped bikes on your haning hitch rack or trunk mounted rack using this adjustable frame adapter.
The adapter is connected at the stem and seatpost of the bike and provides a horizontal bar to easily mount on the arms of your bike rack.
Adjustable to most bike frames. Minimum spacing is 18 in / 46 cm. Maximum spacing is 30.5 in / 77 cm.

Check Stock

BELSIZE Bike Stem Riser, Bicycle Handlebar Extender, Fit for 1-1/8“(28.6mm) Fork, Adjustable Raiser for Road Bike, MTB, BMX Bike

Wide Applicability: Belsize bike stem riser is suitable for most bikes with front fork tubes of 1-1/8'' (28.6mm) in diameter..
Adjustable Height: Coming with 4 spacers (1×5mm & 3×10mm), you can adjust the height of the stem by combining them in different ways, up to 3.46” (88mm), so that the bike perfectly meets your riding needs..
Comfortable Riding: If you are suffering pain in the neck or wrist even back because of your low handlebar, try this stem riser, it can relieve your pain as you can sit more upright by adding heights..
Premium Material: Made of aluminum alloy, lightweight with high-strength. It is also anti-rust and wear-resisting, durable to last for a long time..
Easy Installation: Find a 5mm wrench (package is not included), then slide the stem riser to the front fork tube, adding the original bike stem back and fits all screws, then you will have a more comfortable riding..

Check Stock

MTB Stem 0~90 Degree 90mm 110mm Adjustable Bike Stem for 25.4mm(1\)/31.8(1-1/4\) Handlebars, Suitable for Most of Mountain Bike, Road Bike, BMX with 6pcs Bike Headset Spacer (Black 31.8x28.6x90mm)

✔ Bike Stem size: Front Fork Stem Diameter: 28.6mm (1-1/8"), Handlebar Diameter: 31.8mm/25.4mm. Adjustable Angle: 0° ~ 90°, Length: 90mm/110mm (center distance of the handlebar hole and Bolt).
✔ Adjustable angle: 0°~ 90°.Maximum height extension 135mm /150mm (90mm/110mm), Please make sure your brake cable and shift cable are long enough before install this adjustable stem to your bike..
✔ Material: Constructed of high-strength CNC machined 6061 T6 aluminum alloy.strong and durable. Weight: 390g/415g.
✔ Easy Installation: 1.Loosen the bottom screws use a wrench.
3.Loosen the left and right screws use a wrench.
4.You need to take out the black buttom first when you adjust the angles. Suitable for most road bike, fixed gear bicycle, mountain bikes, MTB, BMX etc.
✔ We offer 6pcs set Black Bike Headset Spacer in the box for free. Inside diameter: 28.6mm(1-1/8 inch). If your looking for color, we have more colors Gasket in our store..

Check Stock

Finding the Perfect Bicycle Seat 2nd edition

...s. Designed for children 2–5 and up to 60lbs..
Zero Contact with Your Alloy or Carbon Frame - The SHOTGUN Pro child bike seat connects only to your seatpost and steerer and has no contact with your mountain bike’s frame..
Fits Almost All Regular and Electric Mountain Bikes - The SHOTGUN Pro Kids MTB seat is fully adjustable to fit electric and regular mountain bikes of all sizes, flat or sloping top tubes, with standard 1 ⅛” steerers. Fitting requires 10mm of stem clearance, unless your bike has a stem that is shorter than 50mm in length, in which case you will need 20mm of stem clearance in order to fit the Shotgun Pro..
Super Fast and Easy To Install And Remove - Swapping the SHOTGUN Pro Kids Bike Seat between MTBs is super easy. Comes with adapters for two bikes, easy to follow installation instructions and an installation video to help with any installation questions you may have about installing the SHOTGUN Pro Kids MTB Seat. Not suitable for Quill stems. Trek ‘Knock Block’ and Scott ‘Syncros’ adaptors sold separately..
From Our Mountain Biking Family To Yours - Designed in NZ by Mountain Bike Moms and Dads. Designed and made to premium quality standards for safety and comfort..

Check Stock

26 Next Avalon Comfort Bike Full Suspension Women s Bike Purple 26

Frame: The women cruiser bike features a dual suspension steel frame Stem: fully-adjustable alloy stem for upright riding position.
Gearing (# of speeds): Shimano 7-speed gear system Brakes: front and rear linear pull brakes.
Wheels/tires: 26" cruiser bike with smooth-rolling street tires Rims: rust-resistant alloy rims Handlebars: steel handlebars.
Seat: padded seat with quick-release seat clamp Pedals: standard pedals.
instructions included 26" cruiser bike dimensions: 65"L x 24.5"W x 40"H.

Check Stock

GANOPPER Bike Stem 31.8 70mm 35 Degree Bar Clamp 31.8mm Mountain Bike Handlebar Stem Riser with 25.4 Bicycle Handlebar Shim

【Specification】:Angle:±35°,Handlebar diameter: 31.8mm (1-1/4"), Steerer Tube diameter: 28.6mm (1-1/8"),Stack Height:42mm, Length: 70mm (center distance of the two holes),Weight: Approx 125g(0.27 lbs).
【Feature】：Universal 31.8 to 25.4 Bicycle Stem Shim, 31.8 Mountain Bike Handlebar Stem can refit into 25.4mm(1") Stem for Fixie Bike,Kids Bike Part etc.,.
【Material】: High Quality Alloy Aluminium AL6061,T6 Heated Treatment, Lightweight.Color: Black.
【Applicaiton】：Suitable for most MTB mountain bikes, road bike, fixed gear bicycle, BMX ,DH ,AM ,FR ,XC Dirt Jump Bike etc. Best choice for cyclists, DIY upgrade the bike for more comfortable ride..
【Package Content】: 31.8 MTB Stem×1, Bike Stem Shim×1(31.8 to 25.4 Stem Adapter).

Check Stock

31.8 Bike Stem Adjustable 0-60 Degree Bicycle Stem Handlebar Riser Extender for Road Bike Mountain Bike MTB BMX Only Fit 1.25 /31.8mm Handlebar 31.8 x 130mm

★ Please confirm your bike fork diameter is 28.6mm (1-1/8") and the handlebar diameter is 31.8mm (1-1/4") before order!!!.
★ The bike stem is sturdy, well designed and easily adjusted, which is preferable to removing the handlebar stem and exchanging it for one with a different angle..
★ The installation is easy because the specs were accurately represented. There is a "degree of angle" indicator on the adjacent parts to allow you to set your angel correctly. The stem has a opening that allows you to see where the handle bar is positioned..
★ This is a pretty nice riser, good adjust-ability. Depending on the thickness of your handlebar, you may need to install a shim. Be sure to use glue on threads if any loosen up..
★ Use the adjustable stem to achieve a more comfortable riding position, the pain caused by the original setup in shoulders/arms/back had to be corrected. This stem and a riser handlebar did the trick, allow you to sit more upright on bike which is better for your back..

Check Stock