Top Adapter Fitting Reviews

Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK

...ng use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Check Stock

Camco RhinoFlex Clear RV Sewer Hose Elbow with 4-in-1 Adapter (39736)

Securely Connects: This RV sewer elbow adapter fits securely into 4 dump station inlets: 4-inch NPT, 3.5-inch NPT, 3-inch NPT, and 3-inch slip fitting.
Clear RV Sewer Elbow: The elbow is clear, so you can see when your sewer hose has finished draining.
has a built-in gasket for an odor-tight connection.
Compatibility: The swivel bayonet fitting makes the RV sewer hose adapter compatible with any lug fitting and allows it to rotate 360 degrees, making it easy to connect.
Easy Storage: Elbow detaches from the 4-in-1 adapter and fits into a 4-inch square RV bumper.
Quality Products: Camco makes quality products for RVing, boating, camping, towing, tailgating, and grilling that help take your passion for the outdoors to the next level.

Check Stock

Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump

Adapts an aftermarket 1982-1988 T-Bird/Cougar type rack to a GM Type 1 Saginaw pump.
Pressure line has a 5/8"-18 male inverted flare fitting at the pump end.
Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting..
Features a -6AN to an 9/16"-18 O-ring fitting on the rack end.

Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

...ing Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect male, 1pc 6AN to 5/16" hose adapter fitting..
5.Professional installation recommended: PTFE hose relatively hard, it can't be bend and folding in half. Nylon and stainless steel braid for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..

Check Stock

Lichamp A/C R134A Adapters with Puncture 134A Can Tap, AC 134 Quick Coupler Hose Connector Fitting Kit with Tank Adapter and Valve Core Remover, QA02

Professional AC R134A freon charging tool kit, come with pair of R-134A adapter, 1-piece ac can tap valve with tank adapter, 1 classic valve core remover..
R 134A Adapter, adjustable valve for easy attching and removal without freon leaking, accurate snap lock (5 ball) with knurled grip ring for easy operation, removable copper adapter for longer maintenance, 1/4 inch male fitting compatible with most automotive air conditioner diagnostic AC manifold gauge hose.
Can Tap Valve Set, R-134A can tap refrigerant bottle dispenser with 1/4 inch male fitting, extra conversion tank adapter featuring 1/4 inch female to 1/2 inch male fitting, thus this set will fits both 1/4 and 1/2 inch female fittings AC gauge hose.
Come with extra automotive high and low pressure side service port valve core removal and installation tool, dual head with thick and thin heads will fits most models.
100% SATISFACTION: If you aren't satisfied with your purchase, contact us through our email at any time you want, and we'll issue you a refund..

Check Stock

CAROPAK - 275-330 Gallon IBC Tank Adapter - IBC Tote Adapter for Garden Hose - 2 Inch Camlock Fittings to 3/4 Inch Male Garden Hose Thread - IBC Tote Fittings

High Quality: This IBC hose adapter is made of polypropylene. Due to the durable material, the IBC fitting does not rust, withstands pressure and is completely safe for drinking water..
Leak Prevention: The camlock garden hose adapter features a large rubber seal to prevent water leakage and provide a tighter, more stable connection..
Easy to Install: Installing an IBC tote valve requires minimal effort and time without the use of special tools. Our 2 inch hose fitting features aluminum eccentric levers for a better fit..
Specifications: This 2 inch camlock fitting fits standard 3/4 inch male garden hose thread and requires no additional parts. The water hose adapter has an outer diameter of 3.23″, an inner diameter of 2.53″..
Practical: The IBC valve can be used up to a maximum temperature of 185°F. Unlike brass adapters, cam fitting will not corrode, but is equally strong and able to withstand harsh chemicals and acidic water..

Check Stock

275 330 Gallon IBC Tote Tank Drain Adapter 2 inch Cam Lock x Garden Hose Food Grade

This is present on many IBC Tote Containers to a GARDEN HOSE Fitting!! (no other fitting is required).
It will also hold up to harsh chemicals and acidic water better than brass will..
Has a large Rubber Gasket Seal to prevent leaking..
This adapter is the best for Drinking Water and other food products..
This COMMERCIALLY MADE FOOD GRADE IBC ToteTank Adapter Will Convert The 2″ Male Camlock Fitting.

Check Stock

AR Blue Clean PW909103K Quick Connect Garden Hose Adapter 3/4 Inch

Inlet Fitting: 3/4” Garden hose connection with integrated filter.
Outlet Fitting: Aluminum 3/4” BSP threading.
Quick Connect: Snap your adapter into place in seconds with the quick connect system, simply pre-attach your adapter to your garden hose and the inlet....
Integrated Filter: The built-in filter protects your pressure washer from any unforeseen debris from your garden hose.
Swivel Inlet: Achieve a secure fasten easily with the swivel grip located on the inlet of the adapter.

Check Stock

EXCELFU Propane Elbow Adapter, Low Pressure 3/8 inch Male Flare Propane Adapter Conversion Fitting for Blackstone Tabletop Camping Grill 17 Inch and 22 Inch Portable Gas Griddle

Application: the adapter converts the 17inch and 22 inch Blackstone Grill to a 3/8 male flare propane extension hose, allows your Blackstone Griddle to connect to the low pressure system on a travel trailer or camper.
Convenience: this 3/8" male flare propane adapter helps convert a Blackstone griddle to allow connection to the low pressure system on a Travel Trailer or allows you to switch from a 1 pound propane bottle to a bulk (20 pound) propane tank.
90 Degree elbow design: this adapter fitting is designed as 90 degree elbow, which helps saving space and makes it more convenient to connect other appliances.
Material: made of high quality material of 100% brass, the fitting provides secure and safe connection from your grill to other appliance.
Attention: EXCELFU propane adapter conversion fitting with elbow is designed for the Blackstone 17 " and 22" tabletop griddles, only suitable for 17 inch and 22 inch Blackstone Grill and only used on low pressure system.

Check Stock

MR HELLO Thread Adapter Straight Fitting 5/8x24 Anodized Aluminum Black Flare Reducer Hose Union

Oil Filter Thread Adapter Straight Fitting fit all oil cooler fuel tank fuel pump fluid Line..
Flare Hose Union Oil Tank Fitting Fits commonly available filters such as:STP S3600 FRAM PH33600 Purolator PSL30001 NAPA 4003 WIX24003.
Fitting Size:Female 5/8-24 to Male 3/4-16 13/16-16 3/4 NPT.
Materia:these Automotive Threaded Adapter is made of aluminum 6061.
NPT threads creates a seal by a wedging action.It is a tapered threads and can give an effective seal for pipes using hydraulic fluids..

Check Stock

Power Steering Box IFM To -6 AN Adapter Fittings, 65-79 GM

Fits most 1965-79 GM power steering boxes with flare fittings.
Kit contains one Steel 11/16"-18 IFM power steering box to -6 AN hose adapter fitting and one Steel 5/8"-18 IFM power steering box to -6 AN hose adapter fitting.

Check Stock

NQN 12 Foot 0-30 PSI High Pressure Adjustable Propane Regulator with Gauge 0~60PSI Gas Flow Indicator, Gas Cooker 3/8inch Female Flare Fitting, Stainless Steel Braided Hose and Gas Grill LP Regulator

【GardenNow Upgraded 12 FT 350 PSI high-pressure Propane extension Hose】This Propane Extension Hose upgrade to come with powerful 7 different couplings adapter fitting: 3/8" NPT Male x 3/8" NPT Male, 1/2" Female NPT x 3/8" Flare Male, 3/8" NPT Male x 3/8" Flare Male, 3/8" Flare Male x 3/8" Flare Male, 1/4" NPT Male x 3/8" Flare Male, 1/8" NPT Male x 3/8" Flare Male, 3/8" Brass Gas Ball Valve. These conversion connection extand the outdoor.
【Premium Material】3/8" female flare fittings on both ends and 7 different types of adapters fittings kit of this 3/8" propane hose are made of 100% Solid Brass to ensure secure and durable for long-lasting to use. The 3/8” Female Flare propane hose is made of durable stainless steel braided with anti corrosion, anti-aging, air tightness, heat-resistance, flexibility features. This propane extension hose with CSA Certification, ensures air tightness and stability. High Pressure: 350 PSI..
【Standard Fittings】This 3/8" Female Fitting x 3/8" Female Fitting Propane Hose comes with 7 different types of adapter adapters. Excellent 3/8" ....

Check Stock

Jevrench 3/4 Inch PVC Bulkhead Fitting, Durable Threaded Bulkhead Water Tank Connector for Rain Barrels, Aquariums, Water Tanks, Tubs, Pools (3/4 Inch, 1PCS)

☘️BULKHEAD FITTING SIZE: bulkhead fitting is 3/4 inch FHT（refers to The bulkhead female thread size）, connector size is 53x 47 mm/2.1 x 1.85 inch, The lock nut is reverse threaded with 4 mm thick silicone gasket that will adjust to the shape of the round barrel, the right size can meet most of your needs and they will work well..
☘️EASY TO INSTALL: The bulkhead fitting is easy to operate and quick to install, first drilling 1-1/2 inch holes in the tank for installation, assembling the bulkhead and hose adapter together, suitable for home, commercial and industrial use.
☘️STRONG AND DURABLE: The bulkhead fitting adapter is made of high quality PVC, which is colorfast and durable, and lasts longer than ordinary plastic fittings，and it comes with a clear silicone gasket for better sealing performance..
☘️ESSENTIAL TOOL: PVC Bulkhead Fitting fits most rain barrels, water tanks, ponds, or aquariums, it is durable and convenient..
☘️OUR SERVICE: We will always put customer satisfaction at the first. If there are any problems with our PVC bulkhead fitting, please contact us and we would be very happy to solve your problems..

Check Stock