Top Accurate Flow Meter Reviews

Argon/CO2 Flow Meter Gas Regulator Compatible with Mig Tig Welder Regulator with 6.6FT Gas Hose 10 to 60 CFH Output Flow 0 to 4000 PSI - CGA-580 Inlet argon flow gauge welding regulator

...Tank Fitting. This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). So it will screw right into the Argon, Argon/CO2 tanks. IDEAL FOR Miller, Lincoln, Hobart, HTP, and most other welders! Idea choice for MIG TIG welding, cutting ,chemical and electronics industry.
【Accurate Gas Flow Gague】Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube. 0-4000psi inlet pressure, easy-to-read bottle pressure gauge included, allowing you to view how much gas is left in the tank range 0 to 4000psi. Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
【Good Design】Use economic style flow meter regulator and single stage piston design, combination of regulator and flow meter as one unit, compact lightweight construction, convenient for use. Argon Regulator is a ideal choice for professional TIG/MIG welding applications, which can be used to reduce and control pressure levels. While the ergonomic flow meter can be adjusted for different uses. 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects.
【You Will Get】 1 X Argon/CO2 Flow Mete....

Check Stock

BETOOLL HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

Brand New BETOOLL Argon / CO2 regulator and flow meter..
Flow Meters are more accurate than the flow gauge regulators..
The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi..
And this flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style regulators..
The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..

Check Stock

BTMETER BT-866A Pro Handheld HVAC Anemometer for CFM Air Flow, Wind Speed Meter Gauge Measures Wind Velocity Temp %RH Dew Point with USB Sync to PC

..., wind temperature, wind flow, relative humidity(%RH) and dew point, provides Max / Min of wind velocity reading to balancing the HVAC system. Built with sensitive 8 vanes to pick up slow winds down to 0.01 resolution. Comes with a USB cable and PC software for wind data logging, analysis and monitoring..
★【High Accurate HVAC CFM Meter】Measures high Wind Velocity range 0.3~40 m/s, +/- 2.0% + 50, display in 6 units: m/s, km/h, ft/min, knots, mph, fpm.
Wind Temp Range 14°F～140°F, +/- 2.7 °F display in 2 units ℃℉(Celsius,Fahrenheit).
★【USB Data Logging】With a metal screw hole in the bottom so you can mount it on a tripod for hands-free operation. Support to connect the wind meter to computer via USB port, for monitor and record wind speeds, temperature, CFM air flow and RH, perfect for balancing air flow in HVAC tasks such as: duct vents, AC air output testing.
★【Portable Anemometer】 It’s a handheld pocket size wind speed indicator comes with protective case, Large Backlit screen, Low battery indicator and auto shut down to save the battery. Portable for indoor and outdoor wind measurements,such as: Long range shooting,Boat Sailing, Kite flying, Climbing, Drone driving,Vent, turbine air flow t....

Check Stock

Protmex Anemometer, Digital Handheld Anemometer with USB Interface, Portable Temperature Humidity Wind Speed Meter with LCD Backlight, Air Volume Flow CFM Meter, PT6252B (Battery Included)

【PROFESSIONAL AIR FLOW METER】Protmex PT6252B anemometer is a portable wind speed gauge that can accurately measure airspeed in 5 units: m/s, km/h, ft/min, knots, ft. Users can work under the dim surrounding with your anemometer via the bright backlit LCD screen..
【USB DATA LOGGING AND DATA SYNC ON COMPUTER】The Protmex air flow meter cfm comes with a USB cable and PC software support can connect the wind meter to the computer via a USB port. For wind data logging, analyzing, and monitoring..
【MULTI-FUNCTIONAL ANEMOMETER】The digital handheld anemometer can monitor and record wind speed, air volume, temperature, humidity, dew point temperature, wet bulb temperature, CFM airflow, and RH, perfect for balancing airflow in HVAC tasks such as duct vents, AC air output testing..
【SWITCHABLE READING】The Protmex wind gauge has the functions of reading holding, maximum value, minimum value, etc. With a large-screen LCD and backlight, the multi-unit switching function..
【ACCURATE AIR VELOCITY METER】Our Protmex wind speed meter for measuring wind speed range 0.5~30 m/s(+/- 2% of readings).
Wind temperature -20~60℃, -4℉-140℉(+/-0.2℃,32.56℉).
2 temp sensors and 8 vanes make the meter is very sensitive to....

Check Stock

Mass Air Flow Sensor MAF AUTOMUTO fit for 2014-2015 for GMC Sierra 1500 4.3L,2014-2015 for GMC Sierra 1500 5.3L,2014-2015 for GMC Sierra 1500 6.2L,2013-2015 for GMC Sierra 2500 HD 6.6L

FIT VEHICLE - Mass Air Flow Sensor fits for 2012-2015 for Chevrolet Captiva Sport 2.4L,2012-2015 for Chevrolet Captiva Sport 3.0L,2015 for Chevrolet....
REPLACE PART - 20787043 23262343 23118170 336-02349.
FEATURES - Mass Air Flow Meter AFM Sensor measures the volume and density of air entering the engine, providing highly accurate airflow readings to....
QUALITY AND INSTALLATION - Meets OEM specifications, Easy to Install direct replacement and Clean, Fast Response, High durability..
Package Included - 1 PC Mass Air Flow Sensor.Please clean out the air box and replace the air filter before installing the MAF Meter, or the Code and....

Check Stock

Koselig Instruments - Hotwire Anemometer | Handheld Anemometer with Telescopic Probe | Measure Wind Speed to 0.01 M/S

EASY TO USE - Durable handheld anemometer with large, easy to read display. No internet required..
RELIABLE - Our duct anemometer is the perfect fieldpiece for professional HVAC techs and anyone who needs an accurate, reliable wind speed/air flow cfm meter with an excellent range. The airflow meter takes measurements with both CFM and CMM and the hot wire anemometer technology is perfect for taking slow wind speeds..
ACCURATE - Temperature measurements are in both Centigrade and Fahrenheit, with a range of 0-50°C/32-122 °F and a resolution of 0.1°C.
The hotwire anemometer comes with a robust, injection-moulded plastic road case. Power: x3 AA batteries, 1.5v..
Koselig, LLC is an American electronics company with a focus on high quality products without the huge price tag. We test our products here in the states and our guarantee is for a full year from the date of purchase..

Check Stock

BTMETER BT-100 Handheld Anemometer Digital Wind Speed CFM Meter Gauge Air Flow Velocity Tester for HVAC Shooting Drone Wind Chill 14℉-113℉ Wind Temperature

【Multifunction Pro Anemometer】Wind Speed, Wind Temperature, Wind Chill, Low battery indicator on bright backlit LCD screen. BT-100 is a portable wind speed guages can accurately measure air speed in 5 units: m/s, km/h, ft/min, knots, mph. Wind Temp in ℃/℉(Degree Celsius/Fahrenheit).
【Accurate Wind Meter】Wind Speed Meter for measuring wind speed range 0.67~67.1 mph(+/- 2% of readings), Wind temperature -10~60℃,14℉-113℉(+/-2℃,35.6℉).
0.2℃. 2 temp sensors and 8 vanes makes this air velocity meter is sensitive to measure very low air flow in HVAC installation, duct vent. A good helper in CFM calculation..

Check Stock

ANNMETER Pro HVAC Anemometer- Air Flow Velocity Meter AN-826A 0.001~100Mph Wind Speed Gauge,Handheld Wind Tester Measuring Airflow Movement Temp with Max AVG Current

【CFM Anemometer】Built with lightweight vane sensor to ensure sensitivity for accurate air flow measurement, Extendable cable and wand can extend to 79 inches, makes this cfm wind speed meter tester can easily reach to air outlet of AC, Vent..
【Pro Airflow Air Velocity Meter】-Accurately measure wind speed ranging from 0.001~100Mph (+/- 5% of reading), wind temperature from 14~113℉(+/- 1.8℉). 5 wind speed units optional: m/s, Ft/min, Knots, Km/hr, Mph.
【Wide Applications Wind Detector】-Handheld wind indicator not only can be applied in HVAC system installation and checking, dust vent detection, air conditioner maintenance, but also for outdoor activities: hiking, camping, boat sailing, sky surfing, shooting, drone Flying..
【Humanize Designed Anemometer】-For continuous measurement, you can fix the gauge on a tripod with the thread hole at the bottom. Auto/ Manual power off function for battery saving. Backlight LCD provides clear reading in darkness or dim place..
【Must Have One Air Flow Meter】-A solid storage case comes with AN-826A, for easy carrying and protecting damage from transport. Buy with confidence! For product defective or any further problem, ANNMETER provides you unconditional warranty!.

Check Stock

CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)

FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..

Check Stock

RX WELD Argon Mig Tig Flow Meter Gas Regulator Gauge with Gas Hose Welding Weld

1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
2.Accurate Gas Flow Gague：Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..
3.RELIABLE QUALITY - Our argon flow meter's body is made of high-quality brass, which can withstand harsh environments..
4.OUTPUT:Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting..
5.Hose Included: RX WELD 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects..

Check Stock

CGOLDENWALL Turbine Flow Meter Digital Fuel Flowmeter with FNPT Inlet/Outlet, 1inch Flow Meter for Water Diesel Kerosene Gasoline, 2.5-26GPM /9-100LPM (1 inch)

FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
TECHNICAL PARAMETERS：① diameter of water inlet: 32mm.
③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
⑥ max temp of tested liquid: 158°F/70°C.
MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..

Check Stock

AWLOLWA Argon CO2 Mig Tig Flow meter Welding Weld Regulator Gauge Gas Welder CGA-580 With 80'' (6.6FT) Hose

INLET - CGA580 Bottle Connection for argon and argon, CO2, and helium blend bottles.
OUTPUT - Female 9/16" x 18 nut and male 5/"8 UNF-18RH fitting.
The Square flow tube reads from 0 - 60 CFH ,which is indicated by a ball which moves up and down in the flow tube.And has large 1 1/2" diameter pressure gauge which reads from 0 - 4000 PSI. Easy to Read, Accurate.
100% HIGH QUALITY AND STURDY - Flowmeter regulator is made of high quality brass and came with 6.6 Ft argon regulator Hose.

Check Stock

RX WELD Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
2.Accurate Gas Flow Gague：Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..
3.RELIABLE QUALITY - Our argon flow meter's body is made of high-quality brass, which can withstand harsh environments..
4.OUTPUT:Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting.It also comes with a standard 1/4" barbed fitting.
5.DESIGNED and PERFECT for MIG and TIG Welding Applications. Our Flowmeter is an economic alternative for the demanding customers who wants more precise gas metering..

Check Stock