Top Ac dc Motor Reviews

CHANCS TYC-40 12V AC 5RPM Shaft 35mm Synchronous Motor With AC Wall Power Adapter - Input 110V Output AC 12V For Christmas Decoration

• 【Description:】It's a combination of an AC 12V motor and a input AC 110V and output AC 12V power supply. Easy to install and easy to operate. The....
• 【TYC-40 AC 12V Shaft 35mm Synchronous Motor Parameter:】 Voltage: 12V AC； Speed: 5r/min ； Shaft Length: 35mm； Shaft Screw Thread Inner....
• 【AC Power Supply Parameter:】 Input: AC 110-120V； Output: AC 12V ； Output current: 1500mA； Frequency: 60Hz； Power: 15W； Wire Length:....
• 【Attention:】 1.The power adapter is an AC power supply,NOT suitable for DC motor. 2.Too high voltage will burn the motor and power supply..
• 【Package Include: 】 1*TYC-40 12V AC 5RPM 35mm Synchronous motor； 1*AC Power Supply.

CHANCS Mini Electric Motor 775 DC 12V/24V With Drill Chuck and PWM DC Motor Speed Controller

• This is a DIY combination of motor, bracket, B10 drill chuck，and 20A PWM speed controller, it can be used with a saw blade to become a mini saw..
• 【The specification of motor:】 Rated Voltage: DC 12V, Unloaded Speed: 10000RPM, Load Speed: 8800RPM. Rated Voltage: DC 24V, Unloaded Speed: 20000RPM, Load Speed: 17600RPM. Starting current: 4-5A Motor Body Diameter: 42mm, Motor Body Length: 66.5mm, Shaft Length: 16mm, Shaft Diameter: 5mm..
• 【The specification of bracket:】 Length: 50mm, Width: 52mm, Height: 53mm, Mounting hole diameter: 4mm, Thickness of bracket: 3mm..
• 【The specification of the speed controller:】 Input Voltage: DC 10V-DC 60V (Ultra wide working voltage)； Output voltage: linear under load； Control Power: 0.01-1200W； Rated Current: 10A； Max Current: 20A (Long-term use of 10A, 450W or less, pay attention to keep the module free of heat dissipation conditions.)； PWM Duty Cycle: 0%-100%； PWM Frequency: 25Khz； Product Size(L x W x H): 77*45*28mm；.
• 【Attention:】 1.About the PWM, please do not connect AC power directly(Such as:110V AC),the input volt of this controller should be DC 9V-60V,otherwise it will be burned out. 2.Make sure the positive and negative connections are correct before powering on the motor speed contro....

17 Quart Portable top-Opening 12/24V DC - 110V/120V AC Fridge-Freezer

• Automatic Voltage Selection Between AC and DC Power.
• Highly Efficient Engel Swing Motor - Low Amp Draws (Even At Start-Up).
• Vibration Resistant for Extreme Conditions.
• Will Operate approximately 80 Degrees (F) From Ambient Temperature.

DC Motor Speed Controller AC 110V Input DC 24V-90V Output Motor Speed Controller Switch Electric Speed Regulator for Permanent Magnet DC Motor 400W DC-51

• High Precision:Motor speed controller 36V has small size, high precision, wide speed controlling range, low power consumption and long service life.
• Size: 11.2 × 10 × 6cm/4.4 × 3.9 × 2.3inch.
• Single Phase Controller:This DC motor speed controller 24V is only suitable for the motor below 1800rpm. A single-phase asynchronous motor speed controller and can be used for 24V, 36V, 90V DC motors. Input Voltage: AC 110V.
• Wide Application:Adjustable DC motor speed controller 90V can be widely used for speed governing device drivers of packaging, printing, electronics, instrument meter, clothing machinery, medical machinery and other industries.
• High Quality Circuit Board:This motor speed controller 24V uses high quality electronic circuit and integrated components, sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
• Fast To Respond:DC motor speed controller is used with single-phase asynchronous motor to realize feedback constant speed and stepless speed regulation. It feels smooth and has good durability.

CHANCS TYC-50 Synchronous Motor 12V DC 5-6RPM CW/CCW 4W Electric Gear Motor For Christmas Decorations

• Model : TYC-50； Shaft Diameter: 7mm ； Shaft Length: 16mm； Direction : CCW/CW(uncontrollable)； Voltage : DC 12V； Speed : 5-6RPM； Power :....
• This is a TYC-50 DC 12V 5-6RPM synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
• Widely used in hand-made, school project, electric fan shake heads, heaters, Christmas tree, prayer cylinders, air conditioners, microwave ovens, glue....
• Motor shaft, line length, speed, voltage can be designed according to customer requirements. If you need other models of motor, you can contact us.....
• Attention: The applicable voltage of this motor is DC 12V, using AC power supply, the motor does NOT work.
• too high voltage will burn the motor.If you....

NOYITO 0-5A AC Current Detection Sensor Module Switch Output (DC 12V, Green)

• Current detection range: AC 0-5A.003cbr003e.
• Operating voltage: DC 5V / 12V / 24V ± 0.2V. (Select the corresponding version of the product according to your needs).003cbr003e.
• Output mode: relay switching output.003cbr003e.
• Relay load: AC 250V 10A Max , DC 30V 10A Max.003cbr003e.
• Application: Intelligent trolley motor over-current detection, motor stall protection current detection, short-circuit protection detection, etc. (The second picture on the left is the schematic and the third picture is the wiring diagram)003cbr003e.

Engel 64 Quart AC - DC Fridge - Freezer with Variable Temperature Control

• Automatic Voltage Selection between AC and DC Power.
• Highly Efficient Engel Swing Motor - Low Amp Draws (Even At Start-Up).

Engel 84 qt Portable Top-Opening AC/DC Fridge/Freezer

• Automatic Voltage Selection between AC and DC power.
• Highly Efficient Swing Motor Compressor - Low Amp Draws (even at start-up).

UEi DL599 - Wireless TRMS Clamp Meter with Motor Testing (600 A AC/DC)

DEWALT Angle Grinder Tool, 4-1/2-Inch, Paddle Switch (DWE4120)

• 9 amp AC/DC and 12,000 RPM motor of the angle grinder is designed for faster material removal and higher overload protection.
• High-efficiency motor of the metal grinder provides low operating temps.
• DEWALT angle grinder comes with One-Touch guard allowing for 360-degree rotation of the guard with a single action.
• Slim ergonomic body design provides increased comfort in extended use applications.
• Low-profile, jam-pot gear case increases durability and allows tool to fit into tight spaces.
• Quick-Change wheel release allows tool-free wheel removal without need for a wrench.
• 2-position, removable side handle provides increased comfort and control.
• 5/8-inch 11 spindle thread accepts a wide range of 4-1/2-inch accessories.

Hantek DSO2D10 2 CH Oscilloscope with Built-in DDS Generator, 100MHz 1GSa/s

• ⚡【AC/DC amp clamp meter】 Hantek AC/DC Current amp Clamp probe with bnc for oscilloscope, 400Hz Bandwidth, 1mV/10mA, 650A..
• ⚡【Multifunction】It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms..
• ⚡【BNC Probe】if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms..
• ⚡【Application】1.Power circuit measurement and malfunction analysis.
• 2.Motor drive of frequency converter (or other electronics) measurement.
• 3.Power electronics equipments measurement..
• ⚡【What you will get】1*AC/DC Current clamp CC-650,1*English Manual..

CHANCS TYC-50 Synchronous Motor 12V AC 5-6RPM CW/CCW 4W Gear Motor Fan Motor

• This is a TYC-50 AC 12V 5-6RPM synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
• 【Specification:】 Product Name : Synchronous Motor； Model : TYC-50； Shaft Diameter: 7mm ； Shaft Length: 16mm； Direction :....
• 【Application:】 Widely used in hand-made, school project, electric fan shake heads, heaters, Christmas tree, prayer cylinders, air conditioners,....
• 【About custom:】Motor shaft, line length, speed, voltage can be designed according to customer requirements. If you need other models of motor, you....
• 【Attention:】 The applicable voltage of this motor is AC 12V, using DC power supply, the motor does not work.

Hantek 6254BE Digital oscilloscope 250MHz Bandwidth Automotive Oscilloscopes Car-Detector 4 Channels 1Gsa/s USB PC Osciloscopio

• ⚡【AC/DC amp clamp meter】 Hantek AC/DC Current amp Clamp probe with bnc for oscilloscope, 20kHz Bandwidth, 1mV/10mA, 65A.
• ⚡【Multifunction】It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms..
• ⚡【BNC Probe】if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms.
• ⚡【Application】1.Power circuit measurement and malfunction analysis.
• 2.Motor drive of frequency converter (or other electronics) measurement.
• 3.Power electronics equipments measurement..
• ⚡【What you will get】1*AC/DC Current clamp CC-65,1*English Manual..