Top Ac Three Phase Diesel Power Reviews

ATO 1 hp VFD, 4A 0.75kW 120V Input 220V Output, Single Phase to 1phase/3phase Variable Frequency Drive, for AC Motor Speed Control

  • ATO 1 hp 110v VFD, 0.75 kW single phase 110v/120v input, single phase or three phase 220v output variable frequency drive. Running your 1 phase/3 phase motors on 120 volt supply via ATO VFD.
  • Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz, Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
  • 【APPLICATION】: ATO 110V Variable frequency drive can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
  • 【TIPS】: Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
  • 【CUSTOMER FIRST】If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

AVAN-300W Three-Phase alternator Permanent Magnet Generator, Rare earth NdFeB Electric 3 Phase High Speed Permanent Magnet Generator (With Rectifier 48V)

  • [Three-phase alternator]: rated power: 300w.
  • permanent magnet material: rare earth NdFeB iron boron.
  • Generator diameter: about 150mm / 5.9 inches.
  • [Rare earth NdFeB iron boron material]: The permanent magnet material is made of rare earth NdFeB iron boron material, which is called the king of magnets. It is wound with high-grade pure copper wire, so this permanent magnet generator has higher efficiency, more stable power and more Safe and reliable..
  • [Good heat dissipation performance]: The three-phase AC generator adopts special stator and rotor design, and has low starting resistance torques and good heat dissipation performance, stable operation and high safety factor..
  • [Easy operation]: The low-speed rare earth permanent magnet generator is very simple to operate, easy to maintain, gearless, can be directly driven, and adopts advanced surface spraying technology, energy saving, high efficiency, safe and reliable, and bright color..
  • [Die-cast aluminum alloy shell]: The three-phase AC permanent magnet generator adopts a die-cast aluminum alloy shell with anti-corrosion treatment, acid, alkali and salt resistance, corrosion resistan....
Check Stock

400W Three-Phase alternator, Rare earth NdFeB Permanent Magnet Electric Motor Generator DIY AC Alternator AVAN?400w Permanent Magnet Motor ((With Rectifier 12V)

  • [Rare earth NdFeB iron boron material]: The permanent magnet material is made of rare earth NdFeB iron boron material, which is called the king of magnets. It is wound with high-grade pure copper wire, so this permanent magnet generator has higher efficiency, more stable power and more Safe and reliable..
  • [Good heat dissipation performance]: The three-phase AC generator adopts special stator and rotor design, and has low starting resistance torque and good heat dissipation performance, stable operation and high safety factor..
  • [Easy operation]: The low-speed rare earth permanent magnet generator is very simple to operate, and the three-phase AC permanent magnet generator is safe, easy to maintain, gearless, and can be driven directly..
  • [Die-cast aluminum alloy shell]: The three-phase AC permanent magnet generator adopts a die-cast aluminum alloy shell with anti-corrosion treatment, acid, alkali and salt resistance, corrosion resistance, and a longer service life..
  • [Surface spraying technology]: The permanent magnet generator adopts advanced surface spraying technology, which is not only energy-saving, efficient, safe and reliable, but also bright in color and beautiful in appearance..
Check Stock

Victron Energy Quattro 5000VA 12-Volt Pure Sine Wave Inverter 220 amp Battery Charger

  • Victron Energy Quattro 12-Volt 5000VA 220 amp is a combined 120V inverter and battery charger, additionally it can be connected to two independent AC....
  • In the event of grid failure, the Quattro takes over the supply to the connected loads. This happens so fast that computers and other electronic....
  • With the unique Power Assist feature the Quattro will prevent overload of a limited AC source, such as a generator or shore power connection.
  • Up to 6 Quattros can operate in parallel to achieve virtually unlimited power, three phase or split phase operations are also possible.
  • Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.
Check Stock

VFD Single to 3 Phase, 4kW 220V AC Single-phase Variable Frequency Drive Inverter, VFD Speed Controller Inverter for 3-phase Motor

  • Output phase: three-phase.VFD Dimension: 100 x 140 x 150 mm (L x W x H)..
  • The phase converter features low noise and low electromagnetic interference, through the optimization of PWM control technology and electromagnetic compatibility of the overall design. There is enough space for heat dissipation between electronic components, and the shell adopts porous heat dissipation..
  • 【Smart Digital Display】 Adopting user-friendly keyboard design & reasonable layout, easy to operate.
  • digital display, intuitive and clear. The detachable design is convenient for remote control..
  • 【Application Motor】CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines..
  • 【Importent Note】 No support external resistor(the function needs to be customized by notifying the seller before purchase),If your motor is heavy load, pls choose a higher power level VFD or contact sales for model selection suggestion..
Check Stock

Victron BMV-712 Battery Monitor (BLACK) with Battery Temperature Sensor kit

  • Victron Energy Quattro 48-Volt 5000VA 70 amp is a combined 120V inverter and battery charger, additionally it can be connected to two independent AC sources.
  • In the event of grid failure, Victron Energy Quattro takes over the supply to the connected loads. This happens so fast that computers and other electronic equipment will continue to operate.
  • With the unique Power Assist feature Victron Energy Quattro will prevent overload of a limited AC source, such as a generator or shore power connection.
  • Up to 6 Victron Energy Quattros can operate in parallel to achieve virtually unlimited power, three phase or split phase operations are also possible.
  • When coupled with a Victron Energy GX device (Sold separately) you can monitor and control your Victron Energy Quattro and system remotely via the internet from anywhere in the world.
Check Stock

3-Phase Voltage Monitoring Relay AC 220-440V Phase Sequence Protection Small Size Protection for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

Voltage Monitoring Relay Phase Sequence Protection TG30S Phase Sequence Relay 3-Phase Mini for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

Victron Energy Quattro 5000VA 48-Volt Pure Sine Wave Inverter and 70 amp Battery Charger

  • Victron Energy Quattro 48-Volt 5000VA 70 amp is a combined 120V inverter and battery charger, additionally it can be connected to two independent AC sources.
  • In the event of grid failure, Victron Energy Quattro takes over the supply to the connected loads. This happens so fast that computers and other electronic equipment will continue to operate.
  • With the unique Power Assist feature Victron Energy Quattro will prevent overload of a limited AC source, such as a generator or shore power connection.
  • Up to 6 Victron Energy Quattros can operate in parallel to achieve virtually unlimited power, three phase or split phase operations are also possible.
  • When coupled with a Victron Energy GX device (Sold separately) you can monitor and control your Victron Energy Quattro and system remotely via the internet from anywhere in the world.
Check Stock

Victron Energy Quattro 5000VA 24-Volt Pure Sine Wave Inverter and 120 amp Battery Charger

  • Victron Energy Quattro 24-Volt 5000VA 120 amp is a combined 120V inverter and battery charger, additionally it can be connected to two independent AC sources.
  • In the event of grid failure, Victron Energy Quattro takes over the supply to the connected loads. This happens so fast that computers and other electronic equipment will continue to operate.
  • With the unique Power Assist feature Victron Energy Quattro will prevent overload of a limited AC source, such as a generator or shore power connection.
  • Up to 6 Victron Energy Quattros can operate in parallel to achieve virtually unlimited power, three phase or split phase operations are also possible.
  • When coupled with a Victron Energy GX device (Sold separately) you can monitor and control your Victron Energy Quattro and system remotely via the internet from anywhere in the world.
Check Stock

Voltage Monitoring Relay Protection 3-Phase AC 220-440V Small Size Phase Sequence Protection Phase Sequence Relay for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

TG30S Mini AC 220-440V Voltage Monitoring Relay Phase Sequence Protection Protection 3-Phase Phase Sequence Relay for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

Mini AC 220-440V TG30S Phase Sequence Protection Voltage Monitoring Relay Voltage Phase Protective Relay Building Electronics Projects for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock