Top Ac Power Meter Reviews

CrocSee AC 80-260V 100A CRS-022B LCD Display Digital Current Voltage Power Energy Frequency Power Factor Multimeter Ammeter Voltmeter with 100A Split Core Current Transformer

The meter can only measure the active power(real power). It doesn’t show Apparent power. If you measure power from a DC-AC inverter, please make sure it’s PURE SINE WAVE. Otherwise the meter can be burnt or melted..
The large-screen LCD can display voltage/ current/ active power/ cumulative energy/ frequency/ power factor at the same time..
Equipped with AC current transformer, donot need to buy it separately.
The CT(Inner diameter of the CT: 15mm/0.6”)can be either on Live Line or Neutral Line..
The bright blue backlight can be turned on/off manually. Store energy data when power off(can be reset).

Check Stock

KETOTEK Digital AC Voltmeter Panel Mounting Meter AC80-300V Frequency Counter 45.0-65.0 HZ LED Display Voltage Volt Frequency Meter Tester Gauge

【2 in 1 Multimeter】Voltage and frequency can be displayed with different color on the LED screen, red for voltage, green for frequency. It is clear and convenient to read..
【Wide measuring range】Voltage: AC 80~300V, Hertz: 45-65Hz, Accuracy: 1% ± 2 digits, with high working efficiency of 2 times/s measuring speed..
【No extra individual power supply】It can directly connect two wires to the tested voltage to measure voltage and frequency without power supply..
【Ultra small size】2.68×1.65×1.5inch / 68x42x38mm. This Voltage Frequency Meter can be installed on anywhere flexibly..
【More information】Operating temperature: 10°F~122°F/-10℃ ~ 50℃. Note: The AC current meter only suits for pure AC 50-60HZ power supply and can NOT be used for square wave, inverter output and sine wave circuit measurement of modified sine wave, otherwise the meter will be damaged..

Check Stock

Digital Clamp Meter 2000 Counts Auto-Ranging AC Current Amp Multimeter with AC/DC Voltage Ohm Capacitance Diode and Continuity Test AVID POWER

【High Performance】AVID POWER auto-ranging 2000 counts digital clamp meter is ideal for accurate measurement of AC/DC voltage, AC current,....
【Multifunction】This AMP clamp meter features detecting function with backlight alarm, Auto power off, Low battery indication, Data retention, Max....
【Safety Compliance】Meeting IEC 61010-1, CAT. III 600V, CE standard. High Voltage Protection.
【Easy to Use】You can measure current by clamping the meter around one of the wires(be sure not the whole power cord, otherwise the multimeter....
【What You Would Get】1*Durable Clamp Multimeter, 2*Probe Pens, 2*1.5 V Batteries, 1*Tool Bag, 1*English User Manual and 24H customer service.....

Check Stock

AIOMEST Digital Clamp Meter 6000 Counts, TRMS Multimeter with Auto Ranging, Amp Meter Measures Inrush AC&DC Current, AC&DC Voltage, Resistance, Capacitance, Diodes and Temperature

✨【6000 COUNTS CLAMP METER】: AN-6205 clamp meter is professionally designed for electricity circuit properties measurement. Test a wide range of measurements including AC/DC Voltage 0.01mV~600V, AC/DC Current 0.01A~600A, Resistance 0.1Ω~60MΩ, Continuity and Diode Test..
✨【AUTO POWER OFF SAFELY】: When measurement exceeds 15 minutes without switching mode and pressing key, the meter will switch to standby mode. Press any key to exit standby mode. The auto power off mode can provide the voltmeter with a longer service life while also better protecting the battery..
✨【STRONG OPERABILITY】: Built with 1.34 inches large double open jaw and pick up AC/DC Current flowing through the conductor, increasing safety while improving this meter’s capabilities. Over-load protection circuit can effectively help you to carry out measurement work within the measurement range. Auto ranging and auto LCD backlight make your measurement more convenience..
✨【CONVENIENT FEATURES】: The avometer included relative value, MAX/ MIN, data hold, inrush current test and audible continuity test, ideal for electrical troubleshooting problems, circuit properties measurement, automotive repair and maintenance, lab, industrial and household applications..

Check Stock

AstroAI Digital Clamp Meter Multimeter 4000 Counts Auto-ranging Amp Voltage Tester Measuring AC/DC Voltage & Current Resistance Capacitance Frequency Continuity Live Wire Test NCV Detection

...rms. When the Meter senses a weak AC signal, the green indicator light will come on and the buzzer will emit a slow, audible beep. when the Meter senses a strong AC signal, the red indicator light will come on and the buzzer will emit a brief beep.
Multifunctional & Easy to read: Support Data Hold, Max/Min, Auto power off after 15 minutes inactivity, low battery indicator and continuity buzzer. The LCD Backlit Screen and Flashlight make it easy to use in a dark working area. ZERO function decreases the data error influenced by the Earth’s magnetic field, and helps you to obtain a more accurate measurement..
Large Jaw Opening: The jaw opening measures current in a conductor without touching or interrupting the circuit. Its slim and compact size makes it easy to operate in narrow spaces..
Additional Tips: This clamp meter has passed the environmental pollution test degree 2 and overvoltage category III 600V safety standards. Combined with Amazon's excellent delivery, we provide lifetime technical support..

Check Stock

bayite AC 80-260V 100A BAYITE-PZEM-061 LCD Display Digital Current Voltage Power Energy Multimeter Ammeter Voltmeter with Current Transformer CT

The meter can only measure the active power(real power). It doesn’t show Apparent power. If you measure power from a DC-AC inverter please make sure it’s PURE SINE WAVE. Otherwise the meter can be burnt or melted.
Voltage test range: One-Phase 80~260V AC Power, 50/60HZ.
Store energy data when power off(can be reset)..
Large-screen LCD (display voltage, current, active power, energy at the same time)..
The blue backlight can be turned on/off manually. The CT can be either on Live line or Neutral Line..

Check Stock

Hioki 3280-10F - AC Current Clamp Meter with Broad Operating Temperature Range, Attachable Flexible Sensor, and Drop-Proof Durability

...ooting tool that will help you solve electrical problems in the car or at home quickly and safely..
✅【Multi-Function】Digtal backlit LCD display - LED Flashlight, Temperature Measurement for liquids and air conditioning ports, Low Battery Indication, Data Hold, True-RMS, ZERO, Automatic range, SEL fuction, Auto power off after 10 minutes inactivity, Non-Contact AC Voltage Detection,full-range overload protection, 2*1.5VAAA batteries already included..
✅【Easy to read】The AC/DC clamp meter has a backlit screen and led flashlight so you can see the readings when working in dim or low-light conditions,like electrical closets, under buildings, behind appliances, and in other enclosed spaces,Convenient LED flashlight illuminates a dimly lit area..
✅【NCV Defection Function】Non-Contact Voltage (NCV) Detector can easily and quickly determine whether there is a voltage.The NCV non-contact AC voltage detection function can be switched by short pressing the NCV button in any gear..
✅【Safety First& Customer Service】 IEC Rated CAT.III 600V, CE and RoHS certified, and it has overload protection on all ranges.MESTEK provides 3 years after-sale service and technical support, 7/24 customer service..

Check Stock

VIVOSUN Plug Power Consumption Meter Energy Voltage Amps Electricity Usage Monitor, 7 Display Modes for Energy Saving, Upgraded Backlight Version

Control Your Bill: Power Meter let you to understand your electronic appliances and make the bill under your control.
Easily measure your power consumption, and calculate your electrical bills.
Easy To Use: Set the amount charged per kWh in your house, plug the meter on the wall, and plug your electronic appliance on the meter, it should start calculating the amount when you start to use the appliance.
Backlight Version : Backlight only light when the meter is connected to AC power and backlight cannot light when using battery.
Large LCD Display allows you to read the number easily.
Built-in Battery: VIVOSUN Power Meter has built-in battery can storage data when you unplug it and continue reading data after you re-plug it.
Price Range: 0.00cost/kWh - 99.99cost/kWh.

Check Stock

Suraielec Watt Meter, Plug-in Socket Power Meter, Auto Cost Calculator, Backlit Large Display, Overload Protection, Kilowatt Wattage Voltage AMP Tester, Electricity Usage Electrical Energy Monitor

【 Monitoring Electric Usage and Know Cost Intuitively 】 Power consumption meter can measure power (W), volts, amps, frequency, power factor, maximum and minimum power (W), cumulative time and energy (kWh), and calculate cost automatically after price-setting.
monitoring home energy usage and help you to save electricity cost.
【 Large Clear LCD Display with Backlight 】 Electricity monitor kilowatt meter has a wide view angle and clear-digit display.
easy to read and operate the electricity monitor in dark areas with the backlit clear LCD display.
【 Long Time Data Hold Memory Function 】 Come with built-in rechargeable battery backup, the watt meter power analyzer can hold data up to 90 days when coming across a power outage or plugging out the meter from the outlet.
all data includes the cost setting will go to zero once press the reset button.
【 Potable and Takes up 1 Outlet Only 】 Compact size.
power meter socket plug leaves the lower wall outlet available when plugging into the upper outlet.
made of high-quality fire-resistant material.
friendly after-sale customer service and 1-year limited warranty.
Note: do not compatible with AC inverter and solar power inverter.
【 3680W Overload Indication 】 This power monitor meter can measure ....

Check Stock

Extech MA445 True RMS 400A AC/DC Clamp Meter with NCV

...backlighting ensures better visibility in dark work areas.
▲The "Return to Zero" Function : reduces data errors affected by the earth's magnetic field and helps you get more accurate measurements.
▲Automatic Sleep Mode : After 30 minutes of inactivity, it automatically switches to sleep mode to save energy.
▲Low Power Indicator : When the clamp meter is in a low battery state, the LCD display of the clamp meter will display a low battery symbol to remind you to replace the battery.
▲Fixed with Free Additional Test Lead : free battery and test lead, everything packed in a case, direct use.
The design is ergonomic and portable, ideal for professionals or new users.
▲Package Content : 1 x Digital Clamp Meter, 2 x Test Leads, 3 x 1.5V AAA Batteries, 1 x Carrying Bag, 1 x User Manual.
▲24-Month Warranty : We provide 24 months unconditional warranty and lifetime after-sales service.

Check Stock

Arris 18-24 hour backup battery for TM822G TM802G TM722G TM702G BPD066H

High quality replacement polarized AC 2 prong power cord cable..
Replace your overused, old, broken, damaged, or misplaced power cable or add extra distance / extension between devices for convenience.
UL listed 2 slot polarized power cords, 125V 10A 18AWG(approx.0.824mm2) extension ac cable connects from your equipment socket to a standard 2 pronged....
AC two prong polarized power cord replacement for Arris Touchstone DG950 DG950A TG2472 Xfinity TG1682 TG1682G Modem Router.
Package content: 1 x 2.5 meter ( 8 Foot ) length Extension AC two prong Power Cord Cable.

Check Stock

Yamaha DGX670B 88-Key Weighted Digital Piano, Black (Furniture Stand Sold Separately)

Replacement Figure 8 AC 2 prong IEC C7 125V 10A / 7A power cord cable for Yamaha YAS-108 Yas-209 Soundbar.
Replace your overused, old, broken, damaged, or misplaced power cable or add extra distance / extension between devices for convenience.
Figure 8 Power Cords ,NEMA 1-15P to IEC320 C7,Non-Polarized,NISPT-2 18AWG(approx.0.824mm2) extension cable connects from your equipment socket to a standard 2 pronged AC outlet receptacle..
8 Foot ac cable power cord for Yamaha YAS-209 YAS-209BL YAS-108 ATS1080-R ATS-1080 YAS-207BL YAS-106 ATS-1060 Sound bar.
Package content: 1 x 2.5 meter ( 8 Foot ) length Figure 8 Extension AC Power Cord for Yamaha YAS-108 Sound bar.

Check Stock

Amprobe AMP-310 Clamp Meter

18-Inch flexible clamp on meter enables measurements in areas that are difficult to access.
True RMS CAT IV 600V, CAT III 1000V meter.
Backlit LCD display for clear readings with 3000 count.
Durable, with drop protection to 6.6-feet (2 m).
Auto-power off after 15 minutes of non-usage conserves battery life.
Low battery indicator and easily accessible battery compartment.

Check Stock