Top Abrasive Saw Reviews

2 inch Carbide Grit Hole Saw, 1-1/2 Inch Cutting Depth for Brick, Concrete Block, Stucco

  • 【PACKAGE】This Carbide grit hole saw kit includes 4 3/8 Inch(111mm) Black SAW BLADE, 1 SDS PLUG MANDREL, 1 DRILL BIT, and 1 CARBIDE TIPPED PILOT DRILL BIT to satisfy your different needs.
  • 【UNIVERSAL APPLICATION】This Carbide grit hole saw is your ideal choice for brick, concrete block, fiber cement siding , backer board, stucco & old plaster.
  • 【EASIER TO CUT】Carbide grit hole saw cuts through a wide range of abrasive materials.
  • 【100% Satisfaction Guarantee】We are dedicated to providing every customer with satisfying products and services.If you are not satisfied with our product, we will provide a free return or refund for you.
Check Stock

Masonry Blade 12 Inch, Dry or Wet timeriver Diamond Saw Blades 12 Inch, Hot Pressing Process, High Durability, 12 Concrete Saw Blade, Retaining Wall, Granite, Marble, Concrete.…

  • Compatible with the R300DCT Concrete Cutting Saw and the R300DCT+ Concrete Cutting Saw.
  • Multi-material Cutting: One saw & One blade will cut most common building materials including ferrous & non-ferrous metals, reinforced concrete, bricks, tiles, plastics & more saving you time and money.
  • 30x Longer Life: Up to 30x longer blade life than abrasive discs when cutting metal Diamond cutting edge is incredibly tough and can make over 1,000 cuts through steel.
  • Constant Diameter: Steel blade body with diamond cutting edge maintains its full diameter so you have maximum cutting capacity for the lifetime of the blade.
  • Cleaner & Safer: The steel body won’t shatter, unlike abrasives, which can cause serious injury Less dust, less sparks & less odour vs abrasive discs, make this a safer cutting solution.
  • Segmented rim design with sub-segmented cutting edge improves efficiency & removes debris from the cut.
Check Stock

Lenox Tools - T29964-64CG LENOX Tools Hole Saw, Carbide Grit, 4-Inch or 102mm (2996464CG)

  • Carbide grit hole saw cuts through a wide range of abrasive materials.
  • Hole saw has a clean-cutting carbide grit edge that won't snag or chip when cutting thin materials.
  • Use the hole saw with a 2L or 7L standard arbor or a 2L SNAP-BACK arbor.
  • Heat resistant carbide teeth for long life in tile and stainless steel..
Check Stock

Dremel 454 3/16\ Grinding Stone, 2 Pack , Brown

  • Ideal for sharpening chain saw blades, quickly and easily.
  • A precision-ground abrasive made for extended usage.
  • Use with Dremel chain saw sharpening attachment 1453.
Check Stock

Dremel 455 7/32\ Grinding Stone, 2 Pack

  • Ideal for sharpening chain saw blades, quickly and easily.
  • For use with the Demel chain saw sharpening attachment No. 1453.
Check Stock

Dremel 455 7/32' Chainsaver Chain Saw Sharpening Grinding Wheel

  • DREMEL 455 Grinding Stone, 7/32 in Dia, 1/8 in Arbor/Shank.
  • Ideal for sharpening chain saw blades, quickly and easily.
  • For use with the Demel chain saw sharpening attachment No. 1453.
Check Stock

Evolution 9 Inch Multi Material Diamond Blade with Segmented Edge, 7/8 in Bore, Multi-Purpose & Metal Cutting Diamond Blade

  • Compatible with the R230DCT Concrete Cutting Saw.
  • Multi-material Cutting: One saw & One blade will cut most common building materials including ferrous & non-ferrous metals, reinforced concrete, bricks, tiles, plastics & more saving you time and money.
  • 30x Longer Life: Up to 30x longer blade life than abrasive discs when cutting metal Diamond cutting edge is incredibly tough and can make over 1,000 cuts through steel.
  • Constant Diameter: Steel blade body with diamond cutting edge maintains its full diameter so you have maximum cutting capacity for the lifetime of the blade.
  • Cleaner & Safer: The steel body won’t shatter, unlike abrasives, which can cause serious injury Less dust, less sparks & less odour vs abrasive discs, make this a safer cutting solution.
  • Segmented rim design with sub-segmented cutting edge improves efficiency & removes debris from the cut.
Check Stock

Evolution 10 Inch Multi Material Diamond Blade With Segmented Edge, 7/8 In Bore, Multi-Purpose & Metal Cutting Diamond Blade

  • Compatible with the R255DCT Concrete Cutting Saw.
  • Multi-material Cutting: One saw & One blade will cut most common building materials including ferrous & non-ferrous metals, reinforced concrete, bricks, tiles, plastics & more saving you time and money.
  • 30x Longer Life: Up to 30x longer blade life than abrasive discs when cutting metal Diamond cutting edge is incredibly tough and can make over 1,000 cuts through steel.
  • Constant Diameter: Steel blade body with diamond cutting edge maintains its full diameter so you have maximum cutting capacity for the lifetime of the blade.
  • Cleaner & Safer: The steel body won’t shatter, unlike abrasives, which can cause serious injury Less dust, less sparks & less odour vs abrasive discs, make this a safer cutting solution.
  • Segmented rim design with sub-segmented cutting edge improves efficiency & removes debris from the cut.
Check Stock

WoWSupM 6-3/8 ,4-3/8 inch Recessed Light Installation kit Carbide Grit Hole Saw Cutting Drywall, Ceilin Tile　for 6” ,4”Lights

  • 【Package】The Carbide grit hole saw Installation light kit includes:1pcs of 4-3/8”, 1pcs of 6-3/8" carbide drill bits(Black or Red), 1pcs of 0.43” hex shank arbor, 2pcs of Ø0.25”x 3.5" HSS pilot drill bits..
  • [Application] This Carbide grit installation light hole saw kit is For 4”, 6” recessed light, Cutting Drywall, Plaster, Ceiling ,Corn Hole Board, Acoustical Tile. Cutting depth: Up to 1” ..
  • [Advantage 1] The carbide grit teeth hardness over 80HRC.It is more sharp ,hard. It’s a longer life in abrasive material..
  • [Advantage 2] The specially back removes the plug easily. It’s faster than bi-metal hole saw 2 times..
  • [Advantage 3] The specially sharp teeth cuts more smooth,clean . It is more faster than tradition carbide grit hole saw up to 30%. It is more faster than tradition bi-metal hole saw up to 50%..
Check Stock

POWERTEC 71395 Taper/Straight Line Jig for Table Saws with 3/4” Wide by 3/8” Deep Miter Slot

  • ASSEMBLY CONTAINS: 36” Miter Bar, Base, Adjustable Fence, Knob, Hold Down Clamps, Tape Measure, Abrasive Grip Strips, T-Bolts, Hardware Screws, Washers and Mini Screw Driver.
  • FUNCTIONS: Primarily serves as a taper cutting jig for table saw – Secondarily operates as a stable straight line ripping jig – Your creativity is the limit.
  • FEATURES: A safe and easy-to-use design, indexing marks for easy angle setting, 5 star knobs and hold down clamps to prevent shifting stock, abrasive grip strips to help stabilize your workpiece and detailed instructions for all skill levels.
  • PREMIUM BUILD: This woodworking taper jig is manufactured with high quality components.
  • The base measures 32” x 7-7/8” ½” with MDF construction and melamine coating on both sides.
  • VERSATILE: Perfect for cutting tapered compound angles, straight line table saw ripping, making handmade furniture, and a wide range of applications such as making chair legs, building tables, custom built shelves or base cabinets and more. PLEASE NOTE: It fits tight and securely in any standard 3/8" x 3/4" miter slot..
Check Stock

VEVOR Round Circular Saw Blade Grinder Machine 110V 370W Rotary Angle Mill Sharpener 125mm Electric Saw Blade Sharpener Machine for Sharpening Carbide Tipped Saw Blades W/Water Tank

  • Strong Power: The Saw Blade Sharpener features 370w Power, 110 Voltage, 3400 RPM running speed, 700mm/28inch max working diameter.
  • Water-Cooled Design: This Water Injection Grinding Grinder Machine is an updated one with a water tank could reduce the damage of grinding wheel and....
  • Adjustable Surround Shaped Pallet: This Circular Saw Blade Sharpener with adjustable surround-shaped pallet to hold the saw blade or other abrasive....
  • Steel Chassis Construction: The Saw Blade Sharpener equips with steel chassis construction, strong structure which with a turntable, easy to adjust....
  • Wide Applications: The Saw Blade Sharpener Machine is suitable for grind other material such as plastic, wood, aluminum alloy for different purpose....
Check Stock

Aexit 80mm x OD Grinding Wheels 16mm x 8mm x 8mm Resin Metal Cutting Diamond Cylindrical Grinding Wheels Grinding Wheel

  • - Durable and long service life. Used for chain saw sharpening..
  • - This chain saw grinding stone is easy to install and features nice good heat dissipation..
  • - There are full and evenly distributed particles on the chainsaw bits, the chain saw chain steadily and efficiently..
  • - The abrasive stone head is made of quality aluminium oxide material with high hardness, good abrasion resistance..
  • - Perfect for metal polishing like a chainsaw, Jade, bodhi, wood, mold, steel, etc..
Check Stock

PLG2SUPT Recessed Light Hole Saw Kit 6-3/8,5-3/8,4-3/8,3-1/8 Inch Carbide Grit for 6”,5”,4”,3” Light Cutting Drywall, Ceiling Tile

  • This recessed light Carbide grit hole saw cutter Install kit includes: 3-1/8”(79mm), 4-3/8”(111mm), 5-3/8”(137mm), 6-3/8"(162mm) hole saw bit, 1 of 0.43”(11mm) hex shank large arbor, 2 of 3.5" (89mm) pilot HSS drill bits.
  • The carbide grit edge hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • The hole saw teeth is specially designing. It’s more sharp and more fast than tradition one. 4 pack hole saws are good match. It’s for professional choice..
Check Stock