Top 90 Degree Ball Fitting Reviews

NEW WILWOOD GO KART BRAKE SET WITH CALIPER PADS MASTER CYLINDER & LINE KIT FOR 1/8 ROTORS GREAT FOR KARTING JR DRAGSTER ETC SOUTHWEST SPEED

Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560)..
Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560). Kit Includes: Wilwood Go-Kart Caliper for .125" Rotors Fits 0.125" Thick rotors Features Two 1.00" Pistons Weighs only 1.2 lbs. Comes with high friction brake pads..
Wilwood Go-Kart Master Cylinder with a 1/2" Bore 1/2" Bore Weighs only .55 lbs. This super lightweight aluminum master cylinder designed specifically for kart & jr. dragster racing applications incorporates an adjustable lever ratio with a remote mount clear fluid reservoir for easy monitoring The assembly comes ready to install and includes billet bracket, lock-wired drilled hardware, & fluid line fitting ..
5 Feet of -3 Nylon Brake Line 3/16" Nylon tubing 5' Should equip most karts with some left-over..
90 Degree Fitting for Caliper Depending on how everything is mounted, the line might run to the caliper at a bad angle for the straight fitting. This 90 degree fitting instal....

Check Stock

Glarks 156Pcs Metric & SAE Straight and 45 Degree and 90 Degree Hydraulic Grease Brass Zerk Grease Nipple Fitting with 60Pcs M6 M10 Caps Assortment Kit

☀ [What You Get]: This kit includes 12 sizes of Metric and SAE grease fittings, M6 x 1 straight for 10pcs, M6 x 1 90-degree for 7pcs, M6 x 1 45-degree for 7pcs, M10 x 1 90-degree for 10pcs, M10 x 1 45-degree for 7pcs. 1/8''-27 straight for 10pcs, 1/8''-27 45 degree for 7pcs, 1/8''-27 90 degree for 7pcs, 1/4''-28 straight for 10pcs, 1/4''-28 45 degree for 7pcs, 1/4''-28 90 degree for 7pcs. Red(M6) caps for 30pcs, black (M10) caps for 30pcs. Total 156pcs which are sorted packed in a plastic box..
☀ [Premium Material]: Grease fittings are made of high-quality brass. Not only the surface is clean and shiny, but also anti-corrosion and anti-rust. They can work for a long time, use them to replace damage zerk fittings, and you will no longer have to worry fitting loss or damage..
☀ [Strong Tightness]: The thread on the grease fittings is clean, tidy and deep, which can ensure that fitting is tightly engaged with grease lines, and prevent the fitting from fulling off or oil leaking form the side..
☀ [Grease Fitting Cap]: Red (m6), black (m10) caps are included in the kit, different colors are convenient for you to distinguish. They can prevent dust, dirt and other pollutants from entering the nozzle, thereby extending the life of the grease fittin....

Check Stock

Dagan Industries Black Steel Ash Brush and Cast Iron Shovel - 11.5 inch

Solid Brass 90 Degree Fitting for Alumcon..
90 Degree Fitting for Alumcon Solid Brass.
3/8" Male Flare x 1/2" Female Pipe Thread.

Check Stock

A/C Hose Crimp Fitting Kit

Has everything you need to complete your custom A/C lines.
Includes enough hose and fitting for installations in applications without bulkhead fittings.
Fittings will need to be crimped at your local shop.
Kit includes (2) band clamps, (4) AN6 straight, (1) AN8 straight, (1) AN10 straight, (2) AN6 90 degree, (1) AN8 90 degree, (1) AN10 90 degree, (1) AN8....

Check Stock

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

UNIVERSAL QUICK COUPLER - The 1/4'' NPT universal couplers (male and female) which fit Industrial (I/M), ARO (A) and Automotive (T) so you do not worry about whether it is fitting or not. Heavy duty steel air fittings are ideal for general purpose applications and the brass has good solid and durability..
SWIVEL QUICK PLUGS - The special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe ....

Check Stock

Smart Vac SMP500 Central Vacuum System Power Unit

Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').

Check Stock

Central Vacuum Cleaner with Deluxe Accessory KIT-Set

Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').

Check Stock

SINTLY 8AN 90 Degree PTFE Hose End AN8 for PTFE E85 Fuel Line Fitting Adapter Blue&Red 2 PCS

【Tips】8AN PTFE hose end can be work with PTFE fuel line ONLY.It can NOT be installed on braided CPE fuel line..
【Size】Thread Size of 8AN PTFE Fitting 90 Degree is 3/4-16UNF and the PTFE fuel line which works with should be 1/2"..
【Included】2 PCS x PTFE 8AN Fitting 90 Degree.
【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems..
SINTLY Provide plently kind of fuel fittings, swivel, push-on lock, PTFE hose end and other fitting adapters..

Check Stock

2 Pack Tripod Ball Head,UTEBIT 360° Rotatable Mini Ball Head with 1/4 Hotshoe Adapter for DSLR Cameras HTC Vive Tripods Monopods Camcorder Light Stand Speedlight Quick Release,Max Load 11lbs

【Wide Application Rang】Top with 1/4" male thread , bottom with 3/8" female thread hole, come with 3/8" to 1/4" convert screw and a 1/4 hot shoe....
【360 Degree Swivel Tripod Head】 Ensure 360 degree horizontal rotating and from -90 degree to 90 degree tilting for panoramic photography when....
【With Locking Knob】 Aiming and horizon leveling can be easily accomplished. You also can use the knob to adjust to the desired angle to meet your....
【Strong & Durable & Safe】Made of aluminum alloy, the Max load is 5KG (11lbs), Very strong and durable. With rubber-padded mount on the top to....
【Light Weight & Portable】Ball head weight 128g, height 65mm, bottom diameter 35mm, ball dimmeter 24mm . Packing includes: 2 x 360 degree ball....

Check Stock

60 Pcs Metric Grease Fittings Kit, Straight and Angled Grease Zerk Kit, M6 M8 M10 1/4" 1/8" 45 90 Degree Hydraulic Grease Zerk Assortment for Angled Grease Guns Mechanical Component Lubrication

Premium Material: All grease gun fittings and tips are made of excellent high strength metal material, which is sturdy, Corrosion and rust resistance, shatter-resistant, and durable for long time use..
Easy to Use: The grease nipple fitting has a clear thread connection, easy to fix and install, and has good sealing performance. Ready for your everyday use..
Easy to Store: The steel grease fitting connectors are small in size with a transparent storage box, easy to carry and store, easy to use or find..
Wide Applications: The grease fitting kits are widely used in most cars, motorcycles, trucks, agricultural and industrial applications, etc. Resolves incompatibility issues with straight, 90 degree, and 45 degree adjustments..
Package Includes: You will receive 5 pcs m6 45°, 5 pcs m6 90°, 15 pcs m6 180°, 5 pcs m8 45°, 5 pcs m8 90°, 10 pcs m8 180°, 5 pcs m10 45°, 5 pcs m10 90°, 5 pcs m10 180°, a total of 60 pcs, enough for your daily use..

Check Stock

Camco 39857 RhinoFLEX Clear 90 Degree Sewer Hose Swivel Fitting

Clear fitting to see if holding tank is empty.
Swivel lug and bayonet fitting for secure connection.
Connect sewer hose to your RV’s waste valve fitting.

Check Stock

EKWB EK-Torque 90 Degree Angled Rotary Fitting Black 4-Pack

EK-Torque Angled 90 Degree - Black is a revolvable angled (90 Degree) adapter fitting with G1/4" threads..
It is very sturdy and there are zero movements in the revolvable joint..

Check Stock

WMYCONGCONG 80 PCS Hydraulic Zerk Grease Fitting Assortment Kit SAE Standard including Straight, 90 Degree, 45 Degree Angled Grease Fitting for Replacing Missing or Broken Zerk Fitting

High Quality: The grease zerks fitting are made of zinc-plated iron, galvanized iron with high strength is more durable and rust-resistance..
Time-Saving: The grease zerk nipple mouth is flat and smooth, great for fastening. The thread is deeply, thread pitch more sturdy, will not slippery when rotating, easy and convenient to handle..
Wide Application: These straight and angled grease fittings are great to replace your old or broken fittings in the hydraulic grease line, suitable for most automotive, motorcycle, truck, farm, and industrial applications..
Good Storage Organization: Different size of grease fitting is packaged into different grids with size label for easy identification. Durable plastic case, convenient to storage. Handy assortment in organized case, easy to carry..
80 pieces SAE Grease Fittings Assortment Kit: Sizes include: Straight 1/8"-27(10pcs).
all common-used sizes, good value, come in handy..

Check Stock