Top 8 Layers Pcb Supplier Reviews

Liftmaster K001A6837 Logic 4 Board Commercial OEM Genuine

【Dimension】 -Size：200mmx150mm/7.87"x5.91"(L*W).
【Material】 -The copper clad laminate is made of FR-4 glass fiber and copper, the number of layers issingle-sided.
【Features】- The copper clad board is resistant to high temperature, is not easily oxidized, is not easily deformed, and is convenient for welding.
【Application】 - PCB circuit boards are very suitable for making PCB circuit boards and models. It is widely used in product development, DIY experiment, maintenance, production, etc.
【Noted】 -The product may be slightly scratched or dirty during transportation, which will not affect its use.

Check Stock

Asus Prime H310M A R2.0/CSM Intel Chipset LGA-1151 MATX Desktop Motherboard

Designed exclusively for 9th generation Intel Core processors to maximize connectivity and speed with an integrated M.2 slot with Intel Optane Memory compatibility.
5x Protection III Hardware-level safeguards provide component longevity and reliability.
Fanxpert delivers advanced fan controls for dynamic cooling.
ASUS Optic-MEM improves memory stability and performance by improving trace isolation between PCB layers to maintain signal integrity even at higher frequencies.
On-board 8-channel HD audio provides warm, immersive crystal-clear surround sound.

Check Stock

PHOPOLLO 5050 LED Strip Lights, 50ft LED Lights for Bedroom with 44 Key IR Remote Controller and 12V Power Supply

Consists of 20 static colors, 8 dynamic modes and 6 DIY colors.
Consists of individual 5050 LED emitters on 2 rolls of 25ft led strips.
Double side sticky adhesive allows for quick and easy installation in a wide variety of locations.
Safe to touch under 12 volt working voltage.
double copper layers on pcb board makes the lights stronger.

Check Stock

zgs78hh 18V Battery Chip Protect Board Replacement Battery Protection, Circuit Board for Makita BL1830 BL1850

【Dimension】 -Size：200mmx150mm/7.87"x5.91"(L*W).
【Material】 -The copper clad laminate is made of FR-4 glass fiber and copper, the number of layers issingle-sided.
【Features】- The copper clad board is resistant to high temperature, is not easily oxidized, is not easily deformed, and is convenient for welding.
【Application】 - PCB circuit boards are very suitable for making PCB circuit boards and models. It is widely used in product development, DIY experiment, maintenance, production, etc.
【Noted】 -The product may be slightly scratched or dirty during transportation, which will not affect its use.

Check Stock

ARCELI Prototype Screw/Terminal Block Shield Board Kit for Arduino MEGA 2560 R3 DIY Soldered

PCB: FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm. Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm..
Terminal Block: Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ). Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass..
Female Header Socket: Pitch 0.1"/2.54mm, pin length 15mm / 0.59" Single row 10pin x1pcs, singal row 8pin x 5pcs, dual row 18pin x1pcs..
Note: This is not original Arduino product.it only a substitute accessories from ARCELI.

Check Stock

Electronics-Salon DIN Rail Mount 8 DPDT Signal Relay Interface Module. (Operating Voltage: DC 24V)

DIN Rail Mount 8 Channel DPDT Signal Relay Interface Module, DC 24V Version..
RYxxW-K high quality signal relays, LED indicator for each relay channel. Darlington transistors circuit driving relay, improve the reliability of action..
DIN rail mount carrier: High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass dual layers PCB..
Pitch 3.81mm / 0.15" screw terminal block, wire range 26-16AWG, strip length 5mm / 0.2", Metric M2 slotted screw..
Datasheet: https://images-na.ssl-images-amazon.com/images/I/A1vg1+5HA8L.pdf.

Check Stock

8.5' x14' Silk Screen Printing Film 50 Sheets Waterproof Inkjet Transparency Film for Water-based Pigment and Dye Inkjet Printers

Shipping from SF. CA US ( Fast Shipping: Shipped to most parts of the United States in 1 to 3 days ).
Waterproof inkjet milky white screen printing film, water-based dye, pigment ink printing machine, specially designed for the screen printing industry.
Touch with wet fingers and print on the sticky surface, the ink will be quickly absorbed by the coating and dry.
Printed films and PCB for plate making and publishing, advertising samples, projection and electronic equipment.
Your One-Stop Supplier: Screen Printing Inkjet and Laser Film, Ink,Screen Tape,Dye-sub Transfer Paper,Heat Transfer Vinyl and Tape.

Check Stock

CZH-LABS DIN Rail Mount 8 Amp Solid State Relay SSR Module in 4~32VDC Out 100~240VAC 8 Channels

MOC3043 Phototriac and BTA12-600B triac (the heatsink is electrically insulated)..
Input Action Voltage DC 3 to 32V. LED indication for each channel. Anti-reverse protection diode..
Output Load Voltage range AC 100 to 240V (50/60Hz). Maximum on-state average current: 8 Amp, maximum on-state current 12 Amp (< 10 seconds). Isolation: Phototriac. Zero cross: Yes..
Terminal Block: Wire range: 24 ~ 12 AWG / 2.5mm square. Strip length: 7mm. Screws - M2.5, steel, Cr3+ Zn plated. Pin header and Cage - Brass..
DIN rail mount, Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass PCB, dual copper layers..

Check Stock

Xtrfy K5 Compact RGB Transparent White, US Layout

Super-scan technology for instant response.

Check Stock

Polychem Ultra CR Ultrasonic Cleaning Solution 1 Gallon

Corrosion remover, mildly acidic. Rinse residue free.
Parts to be cleaned: non-ferrous and light metals, pcb's with water damage, glass, plastics, tarnished brass and chopper, scuba diving gear.
Contaminants to remove: corrosion, lime deposits, water damage, oxide layers, rust, grease, oil. Brightens brass and chopper alloys.
Dilute with water to 1-5 percent before use.

Check Stock

EPOMAKER GK64X RGB Hotswap Custom DIY Kit for 60% Keyboard with Split Spacebar Module PCB Mounting Plate Case GK64X Black

Custom Space Key Module&Wide Compatibility. GX64X includes an extra space key module. With this module, you can easily change your Space key into....
6 Side Bottom Light&16.8 Million RGB Backlight. RGB is such a cool element while playing games. GK64X fully know your needs and thus this model is....
3 Layers Fully Programmable. Custom is not just a word. We make it true. Here you have more than 6 driver settings. Simply download the driver and you....
Professional 60% Keyboard. GK64X is 60% layout PCB, widely compatible with most of 60% keyboard case, you could change the case as you wish. The....
All-in-One Kit. GK64X got all you need for a custom keyboard: PCB, mounting plate, black ABS case, stabilizers, Type-C cable. More than that, you can....

Check Stock

Miuzei PCB Board Prototype Kit for Electronic Projects Circuit Solder Double-Side Board with 40 Pin 2.54 mm Male to Female Headers Connector 2P&3P Screw Terminal Block Solder Flux Solder Wire

⭐【6 Different Sizes PCB Boards】Double Sided Prototype PCB Boards--1 × 9*7cm, 2 × 8*6cm, 5 × 8*2cm and 5× 7*5cm, 5 × 7*3cm, 5 × 5*4cm PCB....
⭐【Convenient for Projects】The upgrate 0.8mm....
⭐【Header Connector】6 pcs 40 pin Male Header, 4 pcs 40 pin Pitch Right Angle Male Headers, 6 pcs 40 Pin Female Header.
⭐【Screw Terminal Block】8 Pcs Screw Terminal Block: 6 pcs 5.08-301-2P and 6 pcs 5.08-301-3P.
Pitch: 5.08mm, Rated Voltage: 300V, Rated Current:....
⭐【High Quality & Warranty】Durable Glass Fiber-FR4 Material (Thickness 1.6mm) is A Very Solid and Durable Prototype Circuit Board.

Check Stock

DollaTek StepStick 4-Layer DRV8825 Stepper Motor Driver Module for 3D Printer Reprap RP A4988

Simple step and direction control interface.
It can directly interface with 3.3V and 5V systems.
Thermal shutdown overtemperature, shutdown overcurrent, and under-voltage lockout.
4 layers, 2 oz copper PCB for better heat dissipation.

Check Stock