Top 8 Aluminum Die casting Reviews

Lucas Heavy Duty Lever Aluminum Grease Gun Kit

  • Working pressure 4,500 PSI, maximum pressure 10,000 PSI..
  • Lightweight rust free anodized aluminum barrel and aluminum die-cast head.
  • Includes 12 inch heavy duty triple reinforced flexible hose, 5-3/8 inch grease pipe and coupler.
  • Ideal applications for Automotive, Agricultural, Marine, Trailers and Industrial.
Check Stock

K2 Skate F.I.T. 90 Boa Inline Skate

  • Boa system- tightens or loosens the boot with a twist of a knob.
  • Die-cast aluminum frame- responsive and stiff die cast aluminum for acceleration, speed and control..
  • High-performance wheels - 90mm wheels and ILQ 7 bearings are great for safe speed with the right amount of spin.
  • Stability plus cuff- provides the right amount of support, flexibility, reliability and comfort to have a good time.
Check Stock

K2 Skate F.I.T. 90 Boa, 10

  • BOA System - Tightens or loosens the boot with a twist of a knob.
  • Stability Plus Cuff - Provides the right amount of support, flexibility, reliability and comfort to have a good time.
  • Die-Cast Aluminum Frame - Responsive and stiff die cast aluminum for acceleration, speed and control..
  • ILQ 7 Bearings - A classic inline skate bearing that has a 608 standard hub and will allow you to skate just a little bit faster than you are used to..
Check Stock

K2 Skate Alexis 90 Boa, 8

  • BOA System - Tightens or loosens the boot with a twist of a knob.
  • Stability Plus Cuff - Provides the right amount of support, flexibility, reliability and comfort to have a good time.
  • Die-Cast Aluminum Frame - Responsive and stiff die cast aluminum for acceleration, speed and control..
  • ILQ 7 Bearings - A classic inline skate bearing that has a 608 standard hub and will allow you to skate just a little bit faster than you are used to..
Check Stock

GKOLED Low Voltage Deck & Step Lights Pack, 6pcs Deck Lights with 6pcs Step Lights

  • Die Cast Aluminum Round Deck Lights with no Surface Screws.
  • This step light made with durable die-casted aluminum material contribute to excellent heat dissipation and corrosion-resistance..
Check Stock

GKOLED Low Voltage Deck & Step Lights Pack, 12pcs Deck Lights with 6pcs Step Lights

  • Die Cast Aluminum Round Deck Lights with no Surface Screws.
  • This step light made with durable die-casted aluminum material contribute to excellent heat dissipation and corrosion-resistance..
Check Stock

J-4000 Jiffy Garment Steamer with Plastic Steam Head 120 Volt

  • The machine offers durable die cast aluminum outer shell so your device will have a longer life.
  • The Garment Steamer will provide steam within 2 minutes after reaching the preheated temp to help keep your garments fresh and wrinkle free.
Check Stock

Ridgid 47760 Universal Die Head 1/4-3/8 NPT HS

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.....
Check Stock

K2 Skate Alexis 90 BOA, Black_Burgundy, 9.5

  • BOA System- Tightens or loosens the boot with a twist of a knob.
  • Die-Cast Aluminum Frame- Responsive and stiff die cast aluminum for acceleration, speed and control..
  • High-performance wheels - 90mm wheels and ILQ 7 bearings are great for safe speed with the right amount of spin.
  • Stability Plus Cuff- Provides the right amount of support, flexibility, reliability and comfort to have a good time.
Check Stock

01 Camera Light, Black Fill Light, for Security System

  • Excellent aluminum substrate makes the whole machine stable and have long service life..
  • Comes with bracket, allows you to adjust the mounting angle at will for 8-90 degrees..
  • 6pcs quality LED lamp beads, 6W output power, dependable for using..
  • High thermal conductivity aluminum substrate has fast thermal conductivity and strong heat dissipation..
  • Die-cast aluminum alloy shell, IP66 grade, can be installed outdoors..
Check Stock

40 Piece Tap and Die Set,SAE Inch Sizes, Essential Threading Tool with Complete Accessories and Storage Case, for Cutting External and Internal Threads, SAE Thread Types: NC, NF, NPT, by NAKAO

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock

Hanson 12008 1\ Rd Hex Plain Die Stock for Tap Die Extraction

  • ...10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF dies 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • BUILT TO LAST: Constructed from hardened alloy steel for maximum strength and longevity.
  • Can cut materials such as cast iron, steel, aluminum, copper.
  • EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes coarse and fine threads numbered taps and dies from #4-40 to #12-24 and fractional taps and dies from 1/4"-28 to 1/2"-20, 1/8"-27 NPT tap and die, metric tap and dies from M3x0.5 to M12x1.75, thread gauge, tap handle, die handle, small tap chuck, and a carrying case for your convenience.
Check Stock

Power Acoustik MOFOS-12D2 12" Dual 2 Ω 1200W RMS Subwoofer, Black

  • 2.5" Dual 4-Ohm 4-Layer Voice Coil, Royal Blue Finish with Diamond Cut Accents, Die Cast Aluminum Voice Coil Heatsink.
  • Non-Pressed Pulp Cone, Polyether Foam Surround. RMS power handling: 1,500, efficiency (1w/1m): 85.40.
  • Nickel Plated 8ga Compression Wire Terminals, Dual Poly-Cotton Spiders, Die-Cast Aluminum Frame, Vented Pole Piece.
Check Stock