Top 70 Amp Fuse Reviews

Painless Performance 30118 Dual Activation, Dual Electric Fan Relay Kit with Thermostatic Switch (On 205/Off 190) for LSX

  • Dual activation cooling fan relay will turn your cooling fans on when the engine reaches the preset temperature of the thermostatic switch mounted in the engine head or when the A/C is turned on.
  • Ideal for installing air conditioning in your project car.
  • Features simple to use Posi-taps for the ignition and A/C compressor connections.
  • Kit includes: Three 40-amp relays with mounting bases & wiring, fuse holder & 70-amp fuse, two LT1/LS1 fan connectors, thermostatic switch, adapter and insulated terminals.
  • Thermostatic switch turns on at 205 degrees and off at 190 degrees.
Check Stock

NEW 38231-TX4-A01 38231TX4A01 Multiplex (6 circuit) Fuse 32A w 2 Screws for CR-V RDX

  • NEW 38231-TX4-A01 Multiplex (6 circuit ) Fuse 32A w 2 SCREWS.
  • Direct Fit - Easy to Install - Includes 2 M5-0.8 X 16MM Phillips Screws w washers.
  • Vehicle Fitment - CR-V ('15-'16) RDX ('13-'18).
  • 6 Pole - Current Ratings: 70amp 40amp 20amp 40amp 30amp 120amp.
Check Stock

MasterStat Thermostat for Evaporative Coolers

  • Designed to control any ducted evaporative cooler with a 2-speed motor up to 1 HP at 120-Volt or 2 HP at 240-Volt.
  • Onboard sensor has a control range of 50 to 90 Degrees F.
  • Outputs provided are auto/manual, pump, fan and timer modes.
  • If power is interrupted while unit is operating, the unit will resume in the mode active during power loss.
  • Kit includes wall control thermostat, 2-speed control, wire nut for common earth connection.
  • spare 3.15-Amp fuse for control, jumper wire for link to N-link.
  • Easy to install in an existing outlet box - minimal wiring required.
  • Compatible with MasterCool ADA51/71, ADA5112/7112, ASA51/71, ASA5112/7112, AUA51/71, AUA5112/7112, all AD1C-contractors series, all AS1C-contractors series, all AU1C-contractors series, all AD2C-contractors series, AS2C-contractors series, AU2C-contractors series.
  • Compatible with UltraCool ADA50/70, ADA50-12/70-12, ASA50/70, ASA50-12/ASA70-12, AUA50/70, AUA50-12/70-12 ada, ADA51/71-series, ADA5.
Check Stock

Truck Upfitters Surface Mounted 100A Circuit Breaker (12V-48V, 100 Amp) for DC Automotive and Marine/Boat use: Main Power Breaker, Audio, Winches, Solar, Lighting, Electric Motors & Other Accessories.

  • ...essories in the event of a short circuited or overloaded condition. When tripped, this DC breaker will remove power to the circuit & place itself in a visibly noticeable "tripped" condition, but can easily be reset by manually flipping the red reset lever back into the dc circuit breaker housing. It is a resettable fuse that can also by manually "tripped" by depressing the red button on top of the breaker..
  • This 100 amp breaker is an auto or marine circuit breaker that can also be used as a power disconnect switch. It is an excellent solution for placing between a battery and 100 Amp Accessory, to use as an amp disconnect switch, as a main 100 amp marine circuit breaker, as a car amp fuse, or simply as a DC 100 amp circuit breaker. This is a 12-48 volt DC (Direct Current) fuse breaker & CANNOT be used IN ANY AC (Alternate Current) OR HOUSEHOLD APPLICATION..
  • Be sure to consult your owner's manual when being used for your trolling motor plug and receptacle. Typically a 100 amp fuse is used on 12V trolling motors with 30, 40, or 45 lbs of thrust, 24V trolling motors with 70 lbs of thrust, & 36V trolling motors with no more than 100 lbs of thrust. A pair of 6 AWG copper lugs are included in this kit, but please verify that a AWG gauge trolling motor wire w....
Check Stock

3 Types 12V Add-a-Circuit Adapter & Fuse Kit - Muhize Fuse Tap Fuse Holder with Standard Mini and Low Profile TAP Blade Fuse for Cars Trucks Boats (9 Pack)

  • PACKAGE INCLUDE - MuHize 3x Low profile mini fuse adapter with 5 Amp low profile mini blade fuses.
  • MuHize 3x Mini fuse adapter with 15 Amp mini blade fuses.
  • MuHize 3x Standard fuse adapter with 5 Amp standard blade fuses..
  • DUAL-SLOT FUSE HOLDER - It provides one fuse holder to protect original circuit and provides a lead with the second fuse holder for new circuit..
  • EASY TO USE - Plug into an existing fuse holder. Easy to install the additional circuits without splicing or cutting..
  • WIDELY APPLICATION - MuHize assorted add a circuit Fuse Tap Adapter kit commonly fits for blade fuses (rating 2Amp-40Amp). 3 Types: Low profile mini fuse adapter fits for Korean Cars.
  • Mini fuse adapter fits for Japan and US Cars.
  • Standard fuse adapter fits for European Cars. Perfect for car alarm, cell phone charger, GPS, DVD player, dash cam, etc.
  • HIGH QUALITY - 100% brand new & made from excellent materials, good electrical conductivity, and melting resistance..
Check Stock

Keenso Car Fuse Remover, Multifunctional 12 Volt Fuse Puller Car Fuse Tester Removal Tool for MiniStandard Blade Fuse

  • 【Non-slip & Convenient】-- The end handle with anti-slip design, automotive fuse puller is convenient to use. Adjustable testing pins allows to be used on mini/standard and maxi automotive fuses.
  • 【Multi-Functional】-- This car fuse remover can be used as a practical tool to pull or remove the automotive fuses quickly and easily, check or test the blade fuse. Great tool for removing fuse blade.
  • 【Sturdy & Anti-abrasion】-- This fuse check is made of premium plastic material, sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • 【Space-saving & Compact】-- Mini size and compact, the multi-functional automotive fuse tester won't occupy too much space, carry it around easily with the convenience. Material: Plastic.
  • Size: 70 × 30 × 25mm / 2.8 × 1.2 × 1in.
  • 【Specifications】-- Condition: 100% Brand New, Material: Plastic, Color: Orange, Size: 70 × 30 × 25mm / 2.8 × 1.2 × 1in, Package Weight: Approx.19g, Fitment: For mini/standard and maxi automotive fuses, Package List: 1 × Fuse Tester.
Check Stock

4 Types 12V Add-a-Circuit Adapter & Fuse Kit - Muhize Fuse Tap Fuse Holder with MICRO2 Mini ATC ATS Low Profile Tap dapter for Cars Trucks Boats (12 Pack)

  • WIDELY APPLICATION – MuHize assorted add a circuit Fuse Tap Adapter kit commonly fits for mini blade fuses (rating 1Amp-30Amp), Perfect for car alarm, cell phone charger, GPS, DVD player, dash cam, etc.
  • WARRANTY – We provide 12 Month Warranty and 24/7 customer service. If you received the fake product, please make the A-to-Z guarantee claim on amazon to protect your rights and interests. Free shipping, for 48 continental states, you will get them in 3-5 working days..
  • ② MuHize 3x Mini fuse adapter with 15 Amp mini blade fuses.
  • ★ New Sale! Only 3 Days! ★ PACKAGE INCLUDE – ① MuHize 3x Low profile mini fuse adapter with 5 Amp low profile mini blade fuses.
  • ③ MuHize 3x Standard fuse adapter with 5 Amp standard blade fuses.
  • DUAL-SLOT FUSE HOLDER – It provides one fuse holder to protect original circuit and provides a lead with the second fuse holder for new circuit..
  • ④ MuHize 3x Mirco2 fuse adapter with 5 Amp standard blade fuses..
  • EASY TO USE – Plug into an existing fuse holder. Easy to install the additional circuits without splicing or cutting..
Check Stock

Electop 6 Way Fuse Block Blade Fuse Box with Negative Bus 6 Circuit Fuse Holder Fuse Block w/Negative Bus Waterproof Protection Cover Sticker Labels for 12V/24V Automotive Car Truck Boat Marine RV

  • ★【NEW DESIGN 6 WAY FUSE BOX】Electop 6-Way Blade Fuse Block accepts 1A to 20A ATC/ATO(middle size) fuses. It has positive and negative sides, which means that each positive terminal screw has a negative terminal screw to make your circuit clear at a glance. This device is intended for branch circuit protection and has good conductivity. Max. 32V DC operating voltage. Max. 20 Amp per circuit & 75 Amp per panel..
  • ★【PREMIUM QUALITY & SAFE MATERIAL】Made of environment friendly PBT material, this fuse holder meets all the standards of an ideal fuse box. It is mechanically strong, insulated, heat resistant and flame resistant. There will hardly cause any issue like produce fracture, deformation, combustion or short circuit phenomenon..
  • ★【PROTECTION COVER & PRE-PRINTED DIY STICKERS】Transparent plastic cover with screw nut, easy to operate, splash and dust-proof design. Adds extra protection to your fuse box & fuses. Come with multi-function stickers for DIY your specific need, convenient for examination and repair, easy to troubleshoot in outdoor..
  • ★【WIDE APPICATION】This 6 Circuit Fuse Block widely used in Car, Truck, Boat, Tankers, Marine, SUV, Yacht, RV, Van, Ships etc. Each fuse of fuses box can be connected to any cir....
Check Stock

4 Pack Car Cup Holder Coaster, 2.75 Inch Diameter Non-Slip Universal Insert Coaster, Durable, Suitable for Most Car Interior, Car Accessory for Women and Men (Red)

  • Dual-slot Fuse Holder: Provides 1 fuse holder to protect existing circuits and a second fuse holder to protect new circuit. Blue flexible socket tail, very easy to connect to any naked wires by only use a vise.
  • Easy to Use: No need to cut or splice wires to install your electronic accessories, convenient and easy to add an extra power or connection to the fuse box..
  • Superior Quality: All of them are made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity, durable and practical for your DIY application.
  • Multipurpose: You can use this dual-slot fuse holder when adding LED strips, radar detectors, dash cams, or any other electronic that requires direct wiring into the fuse box without cutting or splicing.
  • Wide Compatibility: 3pcs low profile mini fuses adapter with 5 Amp low profile mini blade fuse fits for Korean Cars.
  • 4pcs mini fuse adapter with 15 Amp mini blade fuse fits for Japan and US Cars.
  • 3pcs standard fuse adapter with 5 Amp standard blade fuse fits for European Cars.
Check Stock

BUNKER INDUST 10-Way Fuse Box Blade Fuse Block Holder with LED Indicator for Blown Fuse Waterpoof Protection Cover for Car Boat Marine Automotive,Include 20Pcs Blade Fuses and 1Pcs DIY Sticker

  • LED INDICATOR FOR BLOWN FUSE---Each circuit has red LED warning indication.If a fuse blows,the red LED next to the problem fuse will illuminate,allowing you easily identify and replace blown fuses immediately without guessing!.
  • 1 POWER CONNECTION/10 CIRCUIT OUT---Maximum of 30 Amp per circuit & 100 Amp per panel.4-Way Blade Fuse Box can interchangeable or compatible with all automobiles and devices equipped with a 10-33 Volt DC power source..
  • FUSE PROTECTION COVER---A neat clip-on plastic cover that adds extra protection to your fuse box & fuses.Easy to operate, splash and dust-proof design..
  • HEAVY DUTY CONSTRUCTION---This fuse panel has a #10-33 stud for power feed, 250” male quick disconnect terminals, and can take an input voltage of 10 – 33 V DC..
  • PACKAGE INCLUDE---1Pcs 10-Way Fuse Box Holder,1Pcs DIY Sticker,20Pcs Blade Fuses: 5A x 2, 10A x 4, 15A x 4, 20A x 6,30Ax 2,40Ax 2. Note: This box holder is suitable for standard blade fuses(ATO/ATC).Please check the size or shape of fuse before purchasing..
Check Stock

WFCO WF-8965-ANP 65 Amp Power Center Converter Charger

  • Cut-out dimensions: 12-3/16 Width x 10-7/8 Height x 7-1/4 D.
  • 15496 Converter/Charger is 65 Amp DC, Brown.
  • WFCO Converters come with the following features and safety protection:FEATURES: 3 Stage battery charging system.
  • Two 30 amp fuse positions on 8900 fuse boards.
  • 150 amp rated 8900 DC fuse boardsLED fuse boardsUL, cUL-Listed FCC Class BPROTECTION: Reverse Polarity. Over Temperature. Short Circuit. Overload.....
Check Stock

Wiring Harness,Eyourlife LED Light Bar Wiring Harness Kit 180W 12V 40A Fuse Relay On/Off Switch Relay 14AWG 12FT Length Heavy Duty Universal Fitment(2 Lead)

  • Eyourlife Switch Relay: Eyourlife IP56 waterproof power relay and blade fuse proctect circuit safety from overcurrent or short-circuit.Regulate the power to be consistent and prevent any surge..
  • 2 Available Leads:One wiring harmess with two light output connectors gives you brilliant solution to install dual Led lights..
  • Detail:Operating Voltage: 12V,Amp: 40A ,Power Relay Fuse: 40A ,Blade Fuse: ≤180W.
Check Stock

Beaquicy Microwave Fuse 20 Amp 250V Ceramic Fuse Cartridge Fuse Slow-Blow WB27X10388 Replacement for G-E Ken-More Microwave (5-Pack)

  • ✅【20Amp 250V】: The package includes 5 x ceramic slow blow fuse. This microwave fuse shuts down the microwave oven in case of a power surge, preventing the microwave oven from receiving damage during a surge. The fuse has a width of 0.25 inches and a height of 1.16 inches. 20a fuse is made of ceramic and its rated specification is: 20Amp, 250V. Replacing ge microwave fuse solves the FOLLOWING SYMPTOMS: ►Abnormal current, generating heat ►The circuit operate unsafely ►Microwave fuse blown..
  • ✅【5pcs CERAMIC FUSES】:5-Pack 250v 20a fuse microwave is made of durable high quality ceramic. The high quality ceramic material makes 20 amp fuse better able to achieve the effect of power failure. When the current abnormally increases to a certain level and generates heat, it will break, thus protecting the safe operation of the circuit. The since surges do not disappear when the power is disconnected, it is necessary to install this fuse to protect the microwave's electrical panel..
  • ✅【GE/KENMORE MICROWAVES】:The 20Amp Ceramic Cartridge Fuse replaces:875392, AP3994062, PS1481237, EAP1481237, WB27X10928, WB27X10388. COMPATIBLE WITH: JVM2052DN1WW, JVM2052....
Check Stock