Top 6hp Stroke Outboard Motor Reviews

TFCFL 2 Stroke Boat Motor Heavy Duty 6 HP Outboard Motor Boat Engine With Air Cooling System,Inflatable Fishing Boat Engine ,Brushless Motor Fishing Boat Engine

【6HP & 2-Strokes Outboard Boat Motor】6HP & 2-Strokes ,Controlled by the handle, which is operated by the clutch. The lightweight machine can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same when 1 person or 4 persons on it . Customer who has high expectations on speed, please be noticed..
【CDI Ignition System】Standard CDI ignition system for easy starting and improved performance, it can be partially tilted upwards to sail in shallow water, can work in most water depth conditions.Features 360 degree steering rotation for reverse without gear shifting..
【Main Parameters】Overall length 49cm(19.3 in), Overall width 32cm(12.6 in), Overall height 106cm(41.8 in), Transom height 44CM(17.3 in). Short shaft: 40cm. Full throttle operating range 5000-6000r/min, Maximum output 4.4KW/6HP, Idling speed ( in neutral) 1000±100 r/min..
【Advantages】Using 2 Stroke Power, 6HP boat motor: Air Cooling Technology To Improve The Reliability Of The Whole Machine.Convenient Use,Easy Operation And Convenient Maintenance: Travel Safer,More Reliable,More Corrosion Resistant,More Beautiful,More Durable,More Energy Efficient,More Environmentally Friendly..
【Water Cooling System】Superior engine water cooling syste....

Check Stock

TFCFL 4 Stroke 6.0HP Electric Outboard Motor,Outboard Motor Boat Engine Water Cooling CDI System,Heavy Duty Inflatable Fishing Boat Engine 3.75KW 2500 R/MIN

【2 STROKE 6 HP OUTBOARD MOTOR BOAT ENGINE】2 stroke 6HP power, Water cooling technology to improve the reliability of the whole machine. Superior engine water cooling system for improved engine performance Made of special high-strength aluminum alloy material with high hardness, strong durability, good rust and corrosion resistance..
【SIZE & PREFORMANCE】Overall length 1040mm(40.9 in).
Full throttle operating range 5000-6000r/min.
Idling speed ( in neutral) 1000±100 r/min.Engine oil mixing ratio Fuel 50: Engine oil 1.
Spark plug 25.0Nm(18.4 ft-lb) (2.55 kgf-m).
Engine oil drain bolt 18.0Nm(13.3 ft-lb) (1.84 kgf-m)..
【WIDE APPLICATION】Perfect match inflatable boats, fishing boats, sailboats, and small yachts.(The outboard motors are all installed on the stern straight plate and cannot be installed in other places).
【WARM TIPS】Please add gear oil to the gears before use the motor and replace gear o....

Check Stock

6HP 2-Stroke Outboard Motor, Heavy Duty Boat Motor Kayak Motor Fishing Boat Motor Engine Water Cooling System (6HP 2-Stroke, Water-Cooling)

...hout changing speed. Allows you to reverse without shifting gears. It is suitable for various styles of small watercraft, such as kayaks, canoes, dinghies, and inflatable boats..
【Inline Propeller Design】The propeller of this item adopts an inline design, with high-speed engine that can more effectively play the outboard exhaust and thrust. And it has a tilt or lift function, and can be used for shallow water operation for your convenience..
【CDI Ignition System】The ignition system of this motor is a CDI ignition system. You can start the motor quickly and safely. It saves your time and is convenient to use..

Check Stock

CNCEST Outboard Boat Motor Engine Inflatable Boat Fishing Boat Engine Power for Sailboats Small Yachts

【2 Stroke 3.5HP Outboard Motor】- VONZOER 2 Stroke 3.5HP Outboard Motor, superior engine with water cooling CDI system to improve the reliability of the whole machine. Fuel saving, quick start, strong horsepower, low noise, superior performance, environmental protection, durable and compact structure, forward design..
【Wide Applications】- VONZOER outboard boat motor is great for inflatable boats, small yachts, fishing boats and sailboats or used as an auxiliary trolling motor. It is suitable for both saltwater and freshwater..
Full throttle perating range: 4000-5000r/min.
Recommended fuel: Regular unleaded gasoline.
【Warm Note】- Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours). Our outboard motor doesn't with gear oil, please prepare it by yourself.

Check Stock

6.5HP 4 Stroke Outboard Motor Heavy Duty Short Shaft Outboard Boat Engine Trolling Motor with Water Cooling CDI System for Inflatable Fishing Boat Kayak Canoe

【6.5 HP 4 Stroke Outboard Motor】- The 6.5 hp 4-stroke outboard motor provides all the power you need for motoring in a small craft. This engine....
【Note】- Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair it. To will avoid cylinder....
【Wide Applications】- The outboard motor is great for small yachts, inflatable boats, sailboats and fishing boats or used as an auxiliary trolling....
【Warm Tips】- 1. About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the....
【Superior Performance】- 6.5 HP 4 Stroke Outboard Motor, superior engine water cooling CDI system to improve the reliability of the whole machine.....

Check Stock

HYYKJ Outboard Motor Boat Engine 6 HP 2 Stroke 102CC Outboard Motor Marine Inflatable Fishing Boat Engine with CDI Water Air Cooling System 16'' Shaft (6HP 2 Stroke 102CC 16'' Shaft)

6HP 2 STROKE OUTBOARD MOTOR】Water Cooling Technology To Improve The Reliability Of The Whole Machine. Features 360 degree steering rotation for reverse without gear shifting. Convenient Use and Easy Operation, Travel Safer, More Reliable, More Corrosion Resistant, More Beautiful, More Durable, More Energy Efficient, More Environmentally Friendly..
【MAIN PARAMETER 1】Short shaft: 40cm/ 15.7''.
Full throttle operating range: 5000-6000r/min.
Idling speed ( in neutral): 1000±100 r/min.
Recommended fuel Regular unleaded gasoline.
Engine oil mixing ratio Fuel 50: Engine oil 1.
Spark plug: 25.0Nm(18.4 ft-lb) (2.55 kgf-m).
Engine oil drain bolt: 18.0Nm(13.3 ft-lb) (1.84 kgf-m).
Package size: 112cm x 54cm x 39cm (44'' x....

Check Stock

YaeMarine 2 Stroke Outboard Motor Bracket Kicker for Boat up to 25hp Auxilary Trolling Mount

Construction : All stainless stamped construction outboard motor bracket for 2-stroke motors, could bear up to 110 lbs.
Specifications : Motor pad - 7.9"(20.1cm) wide, 6.3"(16cm) and 8.15"(20.7cm) two side length, 1.09"(4.3cm) thick, stainless nylock nuts (metric).
Applications : Fits most style of 2-stroke outboard motors.
Easy to install : 5 vertical running position lock bars.
locking the safety knobs to keep the bracket in place.
holds the outboard motor up or lowers....
Note : please be careful of the sharp edge when you install.
Please feel free to contact us if you have any question about the product. We would try....

Check Stock

Outboard Motor, 2 Stroke 12 hp 246cc Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System

Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
2-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adop....

Check Stock

Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)

Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....

Check Stock

Fuel Pump with Gasket - Compatible with Johnson Evinrude Outboard Motor - Pre 1993 6hp 9.9hp 15hp Models - Replaces Part 395091 397839 18 7350 397274 391638

Replacement Fuel Pump for Outboard Motors. Pre 1993 engine models. Fixes common issues.
motor wont run at full power or will only run with choke on..
Replaces Part numbers - 397274, 397839, 391638, 395091, 9-35350, and 18-7350.
Compatible replacement for Johnson Evinrude Outboard Boat Engines produced up to 1993. Including 6hp, 8hp, 9.9hp, and 15hp.
Factory quality, fit, and finish. Each fuel pump is carefully assembled and tested to insure flawless performance on your Outboard motor. Each fuel....
Backed by a 2 YEAR WARRANTY, rest assured your boat will be back to full power..

Check Stock

Outboard Motor Boat Engine 4 Stroke 6HP Heavy Duty Outboard Motor Fishing Boat Engine with Air Cooling System,Marine Gasoline Fishing Boat Engine

【4 Stroke 6HP】Air cooling technology to improve the reliability of the whole machine. Features 360 degree steering rotation for reverse without....
395x348x1150 mm, Machine weight (kg) 26, Gasoline engine technical parameters: Model RV170..
【MAIN SPECIFICATIONS】Power output mode.
【SUPERIOR AIR-COOLING SYSTEM 】Our outboard boat motor is installed with superior air-cooling system, allowing you to fish all day long without....
【WIDE APPLICATION】Perfect match inflatable boats, fishing boats, sailboats, and small yachts.Performance More Superior,quick start,positions the....

Check Stock

Propeller, Aluminum Alloy Propeller 7.8×8 for Tohatsu for Nissan for Mercury Outboard 4HP 5HP 6HP

100% brand new aftermarket Outboard Propeller, Suitable for Tohatsu for Nissan for Mercury Outboard 4HP 5HP 6HP.
Made of materials aluminum alloy material, flexible and high reliability.
This is a durable marine propellers with good performing.
Original standard, directly replace your old one or broken one.

Check Stock

Outboard Motor 6HP 4 Stroke Outboard Motor Tiller Shaft Boat Engine Fishing Boat Engine Single Cylinder Air-Cooling 6HP 4-Stroke

▶This 6HP 4-Stroke Outboard Engine: Model：single cylinder、air cool、four stroke、hand pull.
▶Detailed Information:Ignition system:transistor non-contact electronic ignition.
Noise exhaust method: muffler out machine....
▶Premium Quality: Durable cast aluminum construction for superior corrosion protection.
vertical mount engine design for increased power,....
▶Tips: Add gasoline and engine oil to the box accordingly. (a box to add gasoline and a box to add engine oil) Don't mix the gasoline with engine....
▶About US: Ship from US stock ! We have our own overseas warehouse and a professional Customer Service Team to reply you within 24 hours. If you....

Check Stock