Top 60mm Nozzle Reviews

C.A. TECHNOLOGIES/C.A.T. 60-TRBN-2 HVLP Turbine Gun w/Cup

  • The 60-TRBN-2 HVLP Turbine spray gun is a non-bleeder type that provides excellent atomization for controlled results..
  • The universal air inlet fitting makes this an easy replacement for all units..
  • Comes standard with a 1.3 mm Needle/Nozzle Set.
  • Full Range of Nozzle/Needle Combinations (0.5 mm - 2.5 mm setups) "sold separately".
Check Stock

Tool Daily Short Pressure Washer Gun with Foam Cannon, 1/4 Inch Quick Connector, with 5 Pressure Washer Nozzle Tips, 1 Liter

  • ...de diameter, please connect the gun to hose directly. If hose has M22 15mm fitting with 15mm inside diameter, please connect the brass coupler to gun and hose..
  • Adjustable Snow Foam Lance with 1/4" quick disconnection fitting. Container Capacity: 1 Liter / 0.22 Gallon. Specification: 1000 PSI to 3000 PSI. Adjustable nozzle for accurate mixing and foam generation. Turn the top knob right (-) to get the thickest mixture, adjust the nozzle to get a proper sprinkle pattern, and let it loose..
  • 5 Nozzle Tips have different angle (0, 15, 25, 40, 65 degree). Choose different nozzle according to the actual need. Such as watering flowers and plants, washing car. They also can be attached to a Quick-Connect Wand for swifter application and more..
  • Application: ideal for Motorcycle, Car Washing.
  • floors, Windows washing, it is best product for Detailing Trucks or SUVs..
Check Stock

Creality 3D Hardened Steel MK8 Nozzle with High Temperature Resistance Upgraded Tungsten All Metal Nozzle Ends for Makerbot Ender 3 / Ender 3 S1, CR-10 Series, 0.2/0.3/0.4/0.5/0.6 mm (5pcs in One Set)

  • [Super Durable Tungsten Material] MK8 extruder nozzles are made by paramount hardened tungsten steel, with long life use time than the normal brass nozzle. The hardness is over HRC60 can reduce the abrasion to the inner and outer of the nozzle during long time printing,more heat-resistant than ordinary brass nozzle,MK nozzles is harder than brass nozzles,which makes it durable accurate and compatible with more filaments..
  • [High Temperature Resistance ] The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible material from PLA,ABS to carbon fiber, even PEEK..
  • [High Precision] these 3D printer nozzles keep stable temperature during printing let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision.Not easy clog during printing, easy to clean. Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
  • [Applicability and Compatibility] Our Creality Ender-3 S1 Nozzles suit to almost all FDM printer,could install to MK8 heating block. Our tungsten nozzles fit for 3D Printer Mak....
Check Stock

Creality 10 Packs 3D Printer Hardened Steel MK8 Nozzles, Upgraded Tungsten All Metal Extruder Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm for Creality Ender 3 Ender 3 V2 Ender 3 pro CR-10

  • [Super Durable Tungsten] - MK8 extruder nozzles are made by paramount hardened tungsten steel, with longer lasting time than the normal brass nozzle. The hardness is beyond HRC60, can reduce the abrasion to the inner and outer of the nozzle during long time printing, more heat-resistant and more durable than ordinary brass nozzle..
  • [Super High Temperature Resistance] - The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible with material such as PLA, ABS to carbon fiber, even PEEK..
  • [High Precision More Than Your Imagination] - Keep stable temperature during printing, let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision. Avoid clog during printing, easy to clean. Made with centering CNC precision automatic lathe and with one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
  • [Applicability & Compatibility] - Our Creality Nozzles are compatible with almost all FDM printer, also fits for MK8 heating block. Our tungsten nozzles are also designed for 3D Printer Makerbot Creality Ender 3 series and CR-10 series 3D printer, MK....
Check Stock

Qtqgoitem Round Nozzle 1/2BSP Thread Flexible Oil Coolant Pipe Tube 60cm Long (Model: 4c0 87c 395 c03 724)

  • Nozzle Size : 40 x 10mm/ 1.6" x 0.4"(L*Tip Dia).
  • Overall Size : 60 x 2.6cm/ 23.6" x 1"(L*D).
  • Package Content : 1 x Flexible Coolant Pipe.
Check Stock

ZIRO PLA Marble Filament 1.75mm,3D Printer Filament PLA 1.75mm Marble Color 1KG(2.2lbs),Marble

  • Recommended Extrusion/Nozzle Temperature 190-220℃, Heat bed 50-60℃, Print Speed 30-90mm/s.
  • Dimensional Accuracy and Consistency, Diameter tolerance at +/-0.03mm, Net weight 1kg (2.2lbs) filament.
  • Printed objects look like Marble texture. A nozzle size of 0.4mm or larger is suggested..
  • Vacuum sealed with desiccant. Bonus - an extra reseal bag for storing used filament and a notecard.
  • After-sales service: Find us from the card, any question will be provided with a satisfactory solution.
Check Stock

Israel Popper Stopper Tolbert with The C.A Warren Players - Big Leg Woman With A Short Short Mini Skirt / I Got Love - 7 Vinyl 45 Record

  • The 60-TRBN-2 HVLP Turbine spray gun is a non-bleeder type that provides excellent atomization for controlled results..
  • The universal air inlet fitting makes this an easy replacement for all units..
  • Comes standard with a 1.3 mm Needle/Nozzle Set.
  • Full Range of Nozzle/Needle Combinations (0.5 mm - 2.5 mm setups) "sold separately".
Check Stock

50PCS Brass Misting Nozzles for Outdoor Cooling System 0.012' Orifice (0.3 mm) 10/24 UNC

  • Operation Pressure:4-70kg/cm (60-995 psi) flow rate:80-145l/min (21-38gpm)..
  • Save Water: Minimal water use of 1/2 gallon of water per hour per nozzle, which fits for low pressure mister system..
  • Package Quantity: 50Pack. The orifice of these mister nozzles is 0.012 inch/0.3 mm. Screw into any 10/24-threaded mist nozzle opening..
  • High Quality & Leak Proof: These misting nozzles made of brass, never rust. Best choice for outdoor use with cold water. Each nozzle is equipped with a leak proof O-ring, so no tape or sealant is required..
  • Wide Application: The brass misting nozzle is widely applied to outdoor cooling system, agriculture irrigation system, green house, landscaping, small fountain, etc..
Check Stock

LabEdit Portable Vacuum Pressure Pump with Tubing and Connectors

  • ...mp is 110-120V and the working HZ is 60HZ so It is made for USA market. (If you want to use this product in other country, please check the working voltage and working HZ to make sure whether it is suitable for the country you want to use for or not..
  • There are three different tubing for connecting to different size nozzle of Laboratory Vacuum Filtration Distillation Apparatus. The three different size hoses are one piece 4mm ID x 5mm OD hose.
  • one unit 6mm ID x 9mm OD. These three type hose could fit most of different size filter bottle nozzle..
  • The transparent tubing need to be pluged to the lab vacuum filtration and connect the black silicone tubing to the lab vacuum filtration and then turn the lab filter pump on in order to let the lab vacuum pump work.(the yellow tubing can be connected to the black tubing in order to connect to big size nozzle of laboratory vacuum filtration distillation apparatus).
  • The lab vacuum pump product is made of plastic shell,Copper wire inside part and four Shockproof rubber base etc. The plastic shell can avoid rust.copper wire inside part makes the product more durable.The shockproof rubber base can reduce noise. You can barely hear the noise when the product is working..
Check Stock

Furnrubden Misting Cooling System with Pump, Patio Misting System, 60.4FT Tubing +26 Brass Spray Nozzles, Outdoor Water Patio Misters for Outside Patio, RV Camper Marine Greenhouse, Fan, Trampoline

  • Misitng System Product List : 12V DC Fresh Water Pump + power supply+ 18M(60.4FT) Including - 3M(10FT)Misting Hose Supply +15M(50FT) assembled misting line with 26 brass misting nozzles.
  • 60 cable ties + Instruction + 3/4inch Standard water tap adapter+1pc PTFE TAPE (If the power adapter or accessories are not configured, please contact us in time).
  • The parameters of micro pump: 12V 60W 5L / min, equipped with 12V 5A 60W AC DC power adapter.
  • (Its normal for pump to have water at the joint due to the test,when unpacking the package.).
  • Low pressure spray pipe fittings parameters: PE food grade materials, nozzle is made of brass, American standard size, orifice nozzle diameter: 0.4mm.
  • spray seat is sliding lock type fast push, can connect 1/4 inch pipe.
  • Uses: spray accessories are mainly used for spray cooling system, cooling, deodorization, humidification, watering, dust removal, gardens, irrigation systems, courtyards, gardens, swimming pools, playgrounds and so on. Working scene: shopping mall, park, artificial landscape, factory, workshop dry area, ....
Check Stock

Geeetech PLA 3D Printer Filament, 1kg Spool (2.2lbs), 1.75mm Dimensional Accuracy +/- 0.03mm, Silver

  • ✔️【Dimensional Accuracy & Consistency】– GEETECH PLA has strict tolerances. Diameter 1.75mm, dimensional accuracy +/- 0.03mm without any exaggeration. It works and harmonizes perfectly with all common 1.75mm FDM 3D printers..
  • ✔️【1kg (2.2lbs) Spool】–Pack of 1 1kg/(2.2lbs) Silver Color pla. Spool size: Φ200mm/7.9" flange, Φ56mm/2.2" hub hole, 64mm/2.5" width. Reel is suitable for most trendy printers, Comgrow, Geeetech, Longer, LABISTS, ANYCUBIC.etc.
  • ✔️【Easy-to-Use, Clog-Free, Bubble-Free】– Recommended extrusion/nozzle temperature 185°C - 215°C (365°F - 419°F), hot bed 25°C - 60°C (77℉~ 140℉) . Works perfectly with all common 1.75mm FDM 3D printers..
  • ✔️【Vacuum Packing】– Vacuum sealed with desiccant to maintain low level of moisture content. And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle.Note: an extra sealed bag is offered to store filament..
  • ✔️【100% Satisfaction Warranty】GEEETECH provides 100% Satisfaction Guarantee. If you are not satisfied with this filament, please kindly contact us at ANY TIME..
Check Stock

Makita PR00000034 1-3/8\ Welding Nozzle

  • WELDING NOZZLE SUPPORT: PVC floor round welding nozzle with wheels, can be used with welding wire, with rollers to guide the welding seam straighter..
  • WELDING NOZZLE WITH WHEEL: The welding nozzle with wheel can be directly fixed on the hot air gun. When there is a wheel, the wheel can be directly attached to the gap, and the gap can be filled evenly along the line of the gap, which can solve the manual filling of the weld. The filling is not straight..
  • WELDING ROD SPECIFICATIONS: Hot Air Gun Welding Nozzle can use 3mm/4mm/5mm..
  • WELDING NOZZLE WITH WHEEL ADAPTER: 8mm inner diameter of the heat gun nozzle, which can be matched with any other welding nozzle with an outer diameter of 8mm..
  • MATERIAL: 304 stainless steel alloy, with good corrosion resistance and heat resistance, can withstand high temperatures of 800-1000℃, will not rust, oxidize, and deform under high temperature for a long time. It is an ideal accessory for plastic welding..
Check Stock

eSUN Carbon Fiber Filled Nylon Filament 1.75mm, PA CF 3D Printer Filament, 1KG Spool 3D Printing Filament for 3D Printers, Natural

  • 【Clog-free & Bubble-Free & Less-tangle】Full mechanical winding and strict manual examination ensure tangling free and avoid filament breaking and snapping.eSUN Carbon Fiber Filled Nylon filament is orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder.It does not overlap or tangle,no cracking..
  • 【Wide Application】Compatible with most of FDM 3D Printers that use 1.75MM filament and suitable for making both strong and flexible industrial parts, prosthetics, medical equipment and complex costumes etc.Recommend Carbon Fiber Nylon filament extrusion / Nozzle temperature 260℃-290℃, bed 45℃-60℃.Due to its unique attribute of abrasiveness, we recommend to use a 0.6mm or larger stainless steel nozzle instead of regular soft metal nozzles..
  • 【Stable Dimensional Tolerance】3D printer filaments are produced with high precise specification and have a tolerance of only +/- 0.05mm. Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance.Minimum tolerance and low warping to ensure consistent feeding and stable prints..
  • 【100% Vacuumed Sealed Packaging】Complete drying for 24 hours before packaging, eSUN filament comes in a sealed vacuum bag ....
Check Stock