Top 6 Screw Scope Rings Reviews

Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)

Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch).
With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily..

Check Stock

Ade Advanced Optics PS002 Cantilever One Piece Riflescope Mount – 1″ inch

This is a 1″ inch one piece riflescope rings. Mounting rings are pushed forward 2″ for better eye relief..
ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher.
Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body..
The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.
Height” 1.5″. Weight 6oz. Screw Torque – 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..

Check Stock

Burris 420180 Xtreme 1" Tactical Aluminum Scope Ring Set (Two Rings) for Picatinny-Style Mounts, Six Hole, Low 1/4 in. Height, Matte Black

...t fit most Weaver and Picatinny-style mounts perfectly and hold your scope at a 1" height.
suitable for all 1-inch / 25.4mm scope tube.
VERSATILE RING SET: If you are searching for a tactical ring for your gun to mount your red-dot optics or magnifiers, opt for this 6-screw ring with a diameter of 1 inch.
this will hold any other 1" accessories that you might want to mount.
EASY TO INSTALL: Installing 1-inch scope rings is a relatively simple process that usually involves attaching the rings to the gun's receiver and tightening them with a screwdriver.
the rings provide a secure and stable platform for the gun, ensuring that it stays in place and does not shift during use.
LIGHTWEIGHT & COST-EFFECTIVE: 1" scope rings are relatively lightweight compared to larger-sized rings which are particularly beneficial for those who need to carry their gun over long distances or for extended periods.
such rings are less expensive than larger-sized rings which makes them cost-effective option for those on a budget.

Check Stock

SVBONY SV185 Scope Rings, 1-inch Scope Rings, Fits All Dovetail 2-piece 1-inch Scope Mounts

0.89 inches in height, from the center of the rifle scope tube to the bottom plane of the rail mount.
built-in tape inside per rings to prevent from marring the scope.
also prevent sliding and fixed position accurately.
with only 1 rail clamp screw and 1 scope clamp screw per side.

Check Stock

Ade Advanced Optics PS001C 30mm Offset Cantilever One Piece Rifle Scope Mount

This is a 30mm one piece riflescope rings. Mounting rings are pushed forward 2" for better eye relief..
ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher.
Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body..
The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.
Height" 1.5". Weight 6oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..

Check Stock

EGW Picatinny Rail Scope Mount Savage Rascal

Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
The ring is for most scopes which are in 1''/ 25.4mm scope tube..
With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..

Check Stock

Rail Riser Mount for Red Dot Sights, Optics and Accessories, Full Size Scope Riser Mount for Scopes

☑ Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
☑ Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope..
☑ Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
☑ The ring is for most scopes which are in 1''/ 25.4mm scope tube. Medium profile, 0.5'' gap from base of mount to bottom of ring. ( Item height: 1.9'').
☑ With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily..

Check Stock

Monstrum Picatinny Rail Mount for Savage Accu-Trigger Model Rifles | Savage 10/11/12/14/16/110 | Short Action | 0 MOA

Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
The ring is for most scopes which are in 1''/ 25.4mm scope tube..
With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..

Check Stock

Modkin 11mm Dovetail Scope Mounts for 1'' Scope Tube High Profile for Airguns or Premium .22 Rifles (Set of 2)

Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
The ring is for most scopes which are in 1''/ 25.4mm scope tube..
With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..

Check Stock

Monstrum Lockdown Series Picatinny/Weaver Scope Rings | 30 mm Diameter | Black | Medium Profile

Sturdy 30 mm diameter scope rings for use with standard 30 mm scope tubes.
Base is compatible with all Picatinny and Weaver mounting platforms.
Torx locking screw system allows for quick yet powerful tightening while protecting from the screws from stripping.
The rings are available in three heights - low profile (15mm of clearance), medium profile (18mm of clearance), and high profile (22mm of clearance).
All Monstrum Tactical Lockdown Series rings and mounts include a lifetime guarantee.

Check Stock

Air Venturi 4x15 Air Rifle Scope and Lasso Mount, BB Gun Scope Attachment

AIR GUN SCOPE: The 4x15 Air Rifle Scope and LASSO Mount is a perfect scope attachment that helps any air gun user have better range and optics on their air rifles. Use this scope to instruct beginners, or buy it for a veteran air rifle master..
AIR GUN COMPATIBILITY: This high-powered Air Rifle Scope and LASSO Mount is compatible with Red Ryder, Lil Duke, and Lil Sure Shot air rifles. The scope mount attachment gives you better control and precision and more powerful shots..
HIGH-QUALITY MATERIALS: The 3/8-inch dovetail mount has an aluminum construction and weighs 0.37 lbs, making this a lightweight rifle scope that's easy to carry around. The included adjustable scope rings help you find the right fit on your air rifle..
INSTALLATION: Remove the elevation ramp from the rear sight and use a screwdriver to remove the rear stock screw. Slide the mount base forward into the top of the air gun and replace the rear stock screw. Attach the air gun scope on top of the mount..
AIR VENTURI: Since 2010, we've been an innovator in the airsoft guns and accessories industry. Our quality airsoft equipment lasts you through years of use. Rely on our air rifle and BB gun accessories to give you a safe and fun shooting experience..

Check Stock

Sig Sauer WHISKEY3 4-12X50mm Scope, 1', SFP - Black + Picatinny Scope Rings (BDC-1 Quadplex Reticle)

... shot at the exact height you want it with the Monstrum Tactical Precision Scope Rings! 1 inch in diameter, the rings are built for use with standard 1 inch scope tubes. The Picatinny base is compatible with all Picatinny mounting systems..
INCREASES STRENGTH It is not compatible with Weaver mounts. The torx locking screw system allows for quick yet powerful tightening while protecting the screws from stripping. These scope rings also features 2 square-integral recoil stops on each ring, which allows us to shave down the weight, while increasing the strength..
NO COMPROMISING Now you do not have to compromise when it comes to choosing either versatility or precision. The Monstrum Precision Rings allow you to properly align your scope to your rifle so you have one less thing to worry about..

Check Stock

Bontok 1 inch Scope Rings 2Pcs 1 inch Diameter Scope Mount Rings for Picatinny Rail 1.00 inch Height

【Perfect Scope Ring Set for All 21mm Picatinny/ Weaver Rails】: Set of 2 Scope include 2 pcs low profile(0.8 inch/20.32mm). 1 inch diameter rings....
【Built-In Extre Tape Protection】: Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion....
【Easy to Install and Remove】:Just twist on/off the rail clamp screw nut via allen wrench and mount the base on rail. Comes with 2 pcs allen....
【Solid But Lightweight Material】:Precision machining of premium 6061 aircraft aluminum alloy, both with black hard coat anodize. Sturdy but....
【Precise Specification】:High quality machining to ensure ultimate accuracy for your mounting..

Check Stock