Top 5v Breadboard Power Supply Reviews

The Complete Country Guitar Method Compilation: Three Books in One! - Master Country Guitar Licks, Techniques & Soloing (Learn How to Play Country Guitar)

  • ...ou need an older driver, pls get it from GitHub—please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html.
  • More detals on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html.
  • Small Arduino UNO Board:It is a smallest, complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper.More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
  • Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version..
Check Stock

AITRIP 2PCS Type-C USB CH340 5V 16MHz for Nano Board CH340/ATmega+328P , Type-C Connection Compatible with Arduino Nano V3.0

  • The Nano can be powered via the Type-C USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
  • Support for external 5V~12V DC power supply, Support power supply by 9V battery..
  • The Nano is using the chips ATmega328P and CH340, Replace FT232RL.
  • The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces.
  • Comes with 2packs of Nano V3.0 Micro Controller Module, each Nano V3.0 Micro Controller module is equipped with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers), no welding needed..
Check Stock

Testeronics 7 in 1 Breadboard Power Module Kit Compatible for Arduino/Raspberry Pi| 2PCS 3.3V/5V Power Supply Modules | 9V/1A Power Adaptor | 2PCS Solderless Breadboard 400 Points|65 PCS Jumper Wires

  • [Breadboard Power Module] Input voltage: 6.5-9V (DC Jack) or USB power supply.
  • [9V / 1A Power Adaptor] Output 9V / 1A DC, Input: 100~240V AC. US Plug 5.5mm x 2.5mm.
  • Compatible for Arduino UNO R3 Mega 2560 1280 ..
  • [400 Breadboard] 400 Points Solderless Breadboard, ABS Plastic Body, Fit for 21-26 AWG (0.4-0.7MM) wire. Compatible for Arduino Nano, ESP32, Raspberry Pi Pico..
  • [DC Power Splitter Cable] 1 Female to 2 Male 5.5mm x 2.1mm DC Power Adapter Splitter Cable.
  • [65 Jumper Wires] 65 PCS 24AWG Breadboard Solid Multi colors pure Copper Jumper Wires Kit.
Check Stock

Power Supply Breadboard 5Pcs Power Supply Board Module Power Supply Module for Breadboard

  • Integrated two groups 3.3V, 5V DC output pins..
  • Designed with USB port which you can use as power supply..
  • The breadboard power module has a wide input voltage ranging from 6.5V to 12V..
  • Two channels independent control, can switch over to 0V, 3.3V, 5V..
Check Stock

Breadboard Kit with Power Supply for Electronics 65 Pieces M/M Bread Jumper Wires 12/16/20/25cm 1 Piece Power Supply Module MB 102 5V/3V 1 Piece 830 Tie-Points Breadboard

  • 【Specification】Input voltage: 6.5-12v (DC) or USB power supply(5V), output voltage: 3.3V, 5V, maximum output current: < 700mA.
  • 【Application】 This kit is suitable for SCM power expansion, electronic building blocks, intelligent car, Arduino robot, etc..
  • 【Universal】The breadboard wires accept resistors, capacitors, transistors, diodes, LEDS, pots and most all other types of components.
  • 【Easy to install】No welding and tool required, convenient for experiment and DIY projects.
  • 【Assorted Lengths Wires】4 lengths of male to male breadboard jumper wires: 12cm, 16cm, 20cm, 25cm.
Check Stock

REXQualis Nano V3.0, 3pcs Nano Board CH340 / ATmega328P with USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 with 3 Cable)

  • √ REXQualis Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system..
  • √ REXQualis Nano is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
  • √ REXQualis Nano is Using Atmel Atmega328P-AU MCU, Support ISP download and USB download, Power via the Mini-B USB..
  • √ The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
Check Stock

Dedicated Power Supply Board Module Power Supply Breadboard Power Supply Module 5Pcs DC 6.5-12V Power Supply Breadboard Module Prototype for Breadboard

  • Integrated two groups 3.3V, 5V DC output pins..
  • Designed with USB port which you can use as power supply..
  • Two channels independent control, can switch over to 0V, 3.3V, 5V..
  • The breadboard power module has a wide input voltage ranging from 6.5V to 12V..
Check Stock

Weewooday 6 Pieces Nano Board V3.0 ATmega328P Without Cable Compatible with Arduino Nano V3.0 with Pin Headers Pin Unsoldered

  • What you will get: the package included 6 pieces of nano board V3.0 ATmega328P, each nano V3.0 ATMEGA328P improved version with 3 pieces of pin headers unsoldered.
  • ATmega328P chips: using Atmega328P-AU MCU, support ISP download, using the same chips ATmega328P and CH340 with the official version.
  • Mini nano board: this is a portable, complete, and breadboard friendly board.
  • It has everything that compatible with Arduino has (electrically) with more analog input pins and onboard +5V AREF jumper.
  • Input and output: each of the 14 digital pins on the Nano can be applied as an input or output.
  • USB connection: the Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27).
  • The power source is automatically selected to the high voltage source.
Check Stock

MCIGICM 6PCS 170 tie-Points Mini Breadboard for Arduino

  • Featuers: 6pcs mini breadboard, green/ white/ black/ red/ blue/ yellow, 170 point prototype breadboard..
  • Solderless breadboard in breadboard kit is for diy arduino ,and you can use with breadboard jumpers wires and breadboard power supply for toys and....
  • Advantages: easy to fixed breadboard jumper wires, easy to use breadboard holder, suitable to pi breadboard kit..
  • The breadboard is made of ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling ..
  • Dimensison: 1.85*1.38*0.33inches (4.7*3.5*8.5cm).
Check Stock

MCIGICM 16Pcs Breadboard 400 Tie Point Solderless Prototype PCB Board Protoboard for Arduino DIY

  • Featuers: 16 pcs prototype breadboard with 400 tie point.
  • Solderless breadboard in breadboard kit is for diy arduino, and you can use with breadboard jumpers wires and breadboard power supply for toys and....
  • Advantages: easy to fixed breadboard jumper wires, easy to use breadboard holder, suitable to pi breadboard Kit..
  • The breadboard is made of ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling ..
Check Stock

MCIGICM 10pcs Breadboard 830 Point Solderless Prototype PCB Board Kit Protoboard MB-102 for Arduino DIY Electronics kit

  • Featuers: 10pcs large breadboard, mb-102 , 830 point prototype breadboard..
  • Solderless breadboard in breadboard kit is for diy arduino ,and you can use with breadboard jumpers wires and breadboard power supply for toys and....
  • Advantages: easy to fixed breadboard jumper wires, easy to use breadboard holder, suitable to pi breadboard kit..
  • The breadboard is made of ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling ..
  • We sincerely hope you have a good experience with our professional service..
Check Stock

MCIGICM 48 Pcs Mini Breadboard 170 Point Solderless Prototype PCB Board Kit for Arduino Proto Shield Distribution Connecting Blocks, 8 pcs for Each

  • Featuers: 48pcs mini breadboard, 8 pcs for each color, green/ white/ black/ red/ blue/ yellow, 170 point prototype breadboard..
  • Solderless breadboard in breadboard kit is for diy arduino ,and you can use with breadboard jumpers wires and breadboard power supply for toys and games..
  • Advantages: easy to fixed breadboard jumper wires, easy to use breadboard holder, suitable to pi breadboard kit..
  • The breadboard is made of ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling ..
  • Package includes: 48 X 170 tie-pointsbreadboard..
Check Stock

for Nano V3.0 Module ATmega328P 5V 16MHz CH340G Chip Microcontroller Development Board USB Cable for Arduino Nano 3pcs+3pcs USB Cable

  • 1.Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system..
  • 2.It uses the chip ATmega328P CH340 instead of FT232RL. You can start with various electronic projects by using the Arduino software (IDE). It has....
  • 3.It can be powered via USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27)..
  • 4.Nano CH340 controller is a compact board similar to the UNO, smaller and breadboard-friendly than Diecimila..
  • 5.Using Atmel Atmega328P-AU MCU, Support ISP download.
Check Stock