Top 5mm Bullet Led Lamp Reviews

Partsam 2 3/4" Smoked Amber LED Clearance Marker Bullet Light / Rubber Grommet 1 LED For Truck Pickups FLush Mount

  • Package includes 2pcs 3/4" Miniature Round Bullet Led Marker Clearance Side Lamp--Smoke Lens / Amber LED.
  • Funictions: Side Marker Lamps / Clearance Lamps / Turn Signal Light / Brake Lights etc..
  • Includes attached grommet and comes with wire pigtails, NOT 180 DEGREE BULLET PLUGS, NOTE: WHITE WIRE IS NEGATIVE AND BLACK WIRE IS POSITIVE.
  • Installation is easy, just drill a 3/4" hole to push it in.
  • Applications: Works on any 12V Vehicles such as truck trailers pickup cars..
Check Stock

WMYCONGCONG 70 PCS Mixed Color 12V DC 5mm LED Pre Wired 20cm Bulb Lamp w/ 20 PCS 5mm Light Emitting Diode LED Holder w/ 10 PCS 9V Battery Clip Connector

  • Pre-wired with built in resistor, soldered well and heatshrinked, ideal for hobbyists, RC car, boat, custom builds, DIY Car Boat Toys Parties and multiply lighting projects etc..
  • 5mm metal LED holders, secure to hold LED firmly.
  • 9V wired battery clip connector, great replacement for a broken battery connector on your electronic device..
  • Color: red, green, white, yellow, blue, quick flashing and slow falshing..
  • Operational voltage range: DC 2v-12v. 2v very dim, 12v very bright..
  • Package Content: 70pcs 5mm LED pre wired light(10pcs each color) + 20 pcs 5mm LED Lamp Holder + 10 pcs Battery Clip Connector..
Check Stock

1 Pcs Led Light Bulb 0.50 Watt T-1 3/4 LED12MFWW-DC Midget Flanged Base Lamp | #AA70RK

  • You Purchasing 1 Pcs Led Light Bulb 0.50 Watt T-1 3/4 LED12MFWW-DC Midget Flanged Base Lamp.
  • Voltage: 12V, Current: 50mA, Wattage: 0.50W, Type: T-1 3/4 (5mm) LED.
  • Light Output: 500 mcd, Base Type: Midget Flanged Base, Life Hours: 100,000.
  • Dimensions: 15.3mm Length x 5mm Diameter, Viewing Angle: 120 Degree, Color Emitted: Warm White.
Check Stock

1 Pcs Replacement Lamp Bulb 0.50W Midget Flanged Base LED28MFR-DC - EOV49 | #YY2R

  • You will receive 1 Pcs Replacement Lamp Bulb 0.50W Midget Flanged Base LED28MFR-DC.
  • Voltage: 28V, Current: 20mA, Wattage: 0.50W, Type: T-1 3/4 (5mm) LED.
  • Light Output: 500 mcd, Base Type: Midget Flanged Base, Life Hours: 100,000.
  • Dimensions: 15.3mm Length x 5mm Diameter, Viewing Angle: 120 Degree, Color Emitted: Red.
Check Stock

10 Pairs EC5 Battery Connector Plugs Goldby EC5 Male Female 5.0mm Banana Plug Connectors Gold Bullet Connector for RC ESC LIPO Battery Device Electric Motor

  • You Will Get: 10 pairs EC5 connectors (10pcs EC5 connector female shell + 10pcs EC5 connector male shell, 20pcs 5mm gold-plated bullet banana connector male plug,20pcs 5mm gold-plated bullet banana connector Female plug ).
  • 5mm gold-plated bullet banana connector plug , good conductivity and continuous stability, the coating protect banana plug from oxidation and extend its life.
  • Provides a secure connection for battery and motor, designed with convenience and reliability in mind.
  • EC5 Connector for RC hobby, car, boat, plane, helicopter, and Li-polymer battery, etc.
  • The connector can be used with 10AWG cables or smaller ones..
Check Stock

Zeee 2S Shorty Lipo Battery 5000mAh (Roar Approved) 7.4V 120C with 5mm Bullet to Deans Connector Hard Case Battery for 1/10 Scale Vehicles RC Car Trucks Boats RC Models(2 Pack)

  • 【Zeee 2S Shorty Lipo Specification】- Battery voltage: 7.4V.
  • 【5mm Bullet Battery Dimensions】- Zeee 2S Shorty RC Lipo Dimension: 95.5*46*25mm/3.76*1.81*0.98inch(L*W*H).
  • 【ROAR Approved Shorty Lipo】- Zeee 2S 5000mAh shorty Lipo was ROAR approved, great battery for competition, racing hobby, provide you with a high C rating, for a faster speed..
  • 【Safety Warning】 - 1. Users must read safety manual before use of the battery.
  • 2. You must use Lithium Polymer(LiPo) specific charger only.
  • 3. The suggested charge rate is 0.5 - 1C.
  • 【What You Get】- 2 Pack Zeee 5000mAh 2S 120C shorty lipo battery with 5mm Bullet to Deans T connector. Any product problems, please Contact US: 1. Enter into "Your Orders" to click "Contact Seller" option.
  • 2. Click "Ask a question" on our storefront. We will get back to you within 24 hours..
Check Stock

HH Fluorescent LH0450 125-7 Starter Base Lamp Holder With Two Hole Bra

  • [Sturdy and Durable to Use]: The diode holder is made of quality plastic material, sturdy and durable to use, having long service lifespan.
  • [Convenient to Use]: Plastic diode holders are for easily attaching LEDs to boards.
  • [Application]: Suitable for Panel Mount LED indicator, Low Voltage Leddiode, Led Components, Panelmount Lighting, Lamp, DIY Project, Science Experiments, Hobby.
  • [Diameter]: 3mm, 5mm, 8mm, total 3 different sizes of LED socket for your selection.
  • [Package]: 50pcs LED plastic sockets, enough for your use.
  • Easy to use and install, economical and practical.
Check Stock

E12 Candelabra LED Bulbs 60W Equivalent, Daylight White 5000K, 6W Chandelier Light Bulbs 600 Lumens, B11 Candle lamp with Decorative Candelabra Base, Non-Dimmable, Pack of 12

  • ...gy eliminates the flicker & noise from our led candelabra light bulbs, reducing the suffering of some health issues such as eyes exhaustion, migraine and so on, which could be caused by some certain levels of exposure to flickering or noisy lighting..
  • Easy Installation & Wide Applications-- Frosted B11 Torpedo Shape Bullet Top with small candelabra base screw in all American E12 base fixtures directly. It won’t cause any fire hazard or burning. Perfect decoration for chandelier, ceiling fan, wall sconce, pendant light table/floor lamp in living room, dining room, hallway, utility room, entryway, porch, and foyer..
  • Stable Performance-- Our led chandelier light bulbs has the highest quality among the other brands. Long lasting life, up to 25,000 hrs more durable, and require much less maintenance than a tungsten lamp. No dark space, illuminating your night life..
Check Stock

Halo LZR1320MB Lazer Front Loading Gimbal Lamp Holder, PAR20, Matte Black

  • light led holder-【50pcs】Nylon LED Holders is more economical and affordable, 1 lot of 50pcs LED clip assortment kit is enough for your basic use.
  • light 3mm uv-led-diode-【Application】Nylon LED holders are for easily attaching LEDs to boards, which is very convenient and practical.
  • fassung bulb clips-【Sturdy and Durable】The diode socket is made of quality nylon material, sturdy and durable to use, which can provide reliable performance.
  • plastic black 9-12v-【4 Different Sizes】3mm, 5mm, 8mm, 10mm, total 4 different sizes of diode holder light socket for your selection, can meet your different requirements in work and daily life.
  • shell red micro-【Good Workmanship】Diode lamp holder has good workmanship, long service lifespan, can offer you the better using experience.
Check Stock

5Pairs EC5 Battery Connector Plugs Gold Bullet Male Female 5.0mm Banana Plug Connectors for RC ESC Lipo Battery Device Electric Motor

  • EC5 Style 5mm Battery Connector Plugs - 10 Plugs Total, 5 Male and 5Female Pieces.
  • 5mm gold-plated bullet banana connector plug , good conductivity and continuous stability, the coating protect banana plug from oxidation and extend its life.
  • Stronger Split Bullet Style Male End - Provides a secure connection for battery and motor, designed with convenience and reliability in mind.
  • EC5 Connector for RC hobby, car, boat, plane, helicopter, and Li-polymer battery, etc.
  • High Current - Fits up to 10 awg wire.Protected to avoid shorting and reverse polarity.
Check Stock

RAB Lighting BULLET2x12NA Adjustable Two Lamp LED Floodlight 12W 120V 4000K Bronze Multi

  • RAB Lighting BULLET2x12NA Adjustable Two Lamp LED Floodlight, 12W, 120V, 4000K, Bronze.
  • The Package Length of the product is 15 inches.
  • The Package Width of the product is 12 inches.
  • The Package Height of the product is 12 inches.
Check Stock

Honbay 50pcs Mixed Colour 5mm LEDs Pre Wired Light 12V 20cm Bulb

  • High quality material, flexible cable, easy to use.
  • For car, boat, industrial, camera, toys, DIY, etc..
Check Stock

500 Pcs 5mm LED Light Emitting Diode Assortment Kit,Low Voltage Diffused Diode for DIY PCB Circuit,Indicator Lights

  • 1.Bright led light:High Quality led chips,ensure to keep each lamp bright enough.
  • 2.High Quality:Environmentally friendly oxygen resin is used in the whole structure,which can withstand high temperature.
  • 3.Application:Always use on indicator lights,DIY Led Project,PCB Circuit,also can be use on Arduino items,perfect use for home,office and industry electrical equipment and electrical appliances.
  • 4.Item Dimension:Head Diameter is 5mm,Pin Length is 18mm.
  • Voltage:Red/Yellow:1.8V-2.3V;Blue/Green/White:2.8-3.6V;Electric current:20mA.
  • 5.What you get:5 color led diode,100pcs in each color,total 500pcs,any quality problem about the product,please contact with us for after sale service.
Check Stock