Top 58 Standard Mount Reviews

Zeadio Metal Tripod Video Rig, Handle Grip Stabilizer, Vlogging Filmmaking Recording Case, Fits for All iPhone and Android Smartphones Action Camera

Adjustable phone holder mount - Can hold ALL Smartphones or Phablet with width between 58mm to 105mm..
Forget Shaky Videos - Simultaneously hold the handles with both hands can easily maintain the cellphone balance and greatly reduces shake..
With 2 standard Hot-shoe mount - It can be simultaneously attached LED light, microphone or other devices at the same time..
Attached to any tripod, monopod, stabilizer or other filming device with a standard 1/4 inch thread interface..

Check Stock

UAYESOK VHF Marine Base Antenna 48 Inch Fiberglass Waterproof Boat Antenna W/7m RG-58U Cable Adjustable Ratchet Fixed Mount

[ELECTRICAL SPECIFICATIONS] Frequency: 156-163MHz.
[MECHANICAL SPECIFICATIONS] Height: 110±5 CM/44inch.
Cable Length/Type: 7m Low loss RG-58U coaxial cable(white).
Anti-Corrosion Materials, fiberglass construction, smooth and high gloss finish, long-life use.
180 degrees adjustable Nylon ratchet mount, sturdy and durable, easy to Install and operate.
Pretuned for all marine band frequencies, increases reception and range of radio.
widely used in boat and offshore, motor boat, cruiser, sailboat, yacht, Truck, RV, Cruise Ship,Kayaking,etc..
Compatible With Cobra,Icom, uniden, Standard Horizon, HYS, Retevis Marine Floating VHF Radio and Marine Fixed Mount Radio.
For Icom, Kenwood, Motorola, Yaesu/Vertex Standard, Uniden, Wilson, Marantz Handheld or Fixed Mount VHF ham RADIO.

Check Stock

Shakespeare 5215 VHF 36-Inch Low-Profile Stainless Steel Antenna

[159V Stubby Marine Antenna]Frequency: 156-163MHz.
[MECHANICAL SPECIFICATIONS]Height: 164±5 mm.
Cable Length/Type: 5m/16.4ft/Low loss RG-58 coaxial cable.
Stainless steel L-bracket for side or mast mounting(horizontal rail or vertical rail)made of corrosion-resistant material,adapt to rough weather.
Pretuned for all marine band frequencies,Increases reception and range of radio.
Extend the Range of Your Communication.widely used in boat and offshore, motor boat, cruiser, sailboat, yacht, etc..
Compatible With Cobra,Icom, uniden, Standard Horizon, HYS, Retevis Handheld Marine Floating VHF Radio and Marine Fixed Mount Radio.
For Icom, Kenwood, Motorola, Yaesu/Vertex Standard, Uniden, Wilson, Marantz Handheld or Fixed Mount VHF RADIO..

Check Stock

HumanCentric VESA Mount Adapter for LG Monitors 24MP58VQ, 24MP58VQ-P, 24MP59HT, 24MP59HT-P, and 24MP60VQ, VESA Adapter Bracket Mounts Monitor to VESA Stand, Arm or Desk Mount with 75x75 or 100x100 mm

Mount your non VESA LG monitor on a standard VESA mount with HumanCentric VESA adapters: Mount the unmountable and get your monitor onto a VESA mounting system. Use this VESA adapter to attach certain LG monitors to VESA arms, VESA stands, and VESA desk mounts. The mount adapter makes your monitor attachable to standard monitor mounting sizes of 75x75 mm and 100x100 mm found on most workstation VESA mounts..
This VESA mount adapter is designed for these specific LG monitor model numbers: LG 24MP58VQ, LG 24MP58VQ-P, LG 24MP59HT, LG 24MP59HT-P, and LG 24MP60VQ. It is only compatible with these models and will not fit other LG monitors. Always double check your monitor model number before ordering. If you aren’t sure if it will fit your monitor, please ask!.
Quick and easy installation with hardware included: You’ll be able to install this VESA adapter for your compatible LG monitor in only a few minutes with nothing more than a screwdriver. Just remove the existing base and screw ours in place instead. Then connect it to your VESA mount. We test our mounts extensively to make sure they fit your monitor just right..
HumanCentric designs with you in mind: we are the world’s largest brand and manufacturer of VESA mount adapters. They are designed ....

Check Stock

Mount-It! Motorized Fireplace TV Wall Mount, Electric TV Mount with Height Adjustable Drop Down Arms for Mantel Installation, Fits 65, 70, 75, 80 Inch Screens

IN-WALL INSTALLATION: The recessed base of this powered TV wall mount conceals the arm and allows your TV to sit flush to the wall when in the upper position with an extremely low 1.65" profile - Please note that this TV mount requires in-wall installation between standard 16 inch studs and an external power source.
HEAVY DUTY DESIGN: Our motorized television mount is made from solid steel, includes gas springs to support the lifting arm and is rated with a high weight capacity of 110 pounds making it suitable for large TVs up to 80 inch screen size. Please note that a 60" or larger TV is required to fully cover the recessed box in the raised position.
UNIVERSAL FIT: This premium motorized tv wall mount fits TVs with screen size of 42 47 50 55 58 60 65 70 75 80 inches in size, depending on VESA pattern. Compatible with a large variety of VESA 200x200, 300x200, 300x300, 400x200, 400x300, 400x400 and 600x400 bolt hole patterns. Please ensure your TV has the correct pattern, regardless of its screen size to ensure this mount will fit your TV.

Check Stock

BLUE STONE TV Wall Mount, Full Motion TV Mount Swivel and Tilt for Most 28-60 Inch TVs, Wall Mount TV Bracket up to 80 lbs and Max VESA 400x400mm, Perfect Center Design for LED LCD Curved Flat Screen

TV MOUNT COMPATIBLITY: This TV wall mount fits for 28", 30", 32", 40", 42", 43" 48", 50", 55", 58", 60" TVs. TV wall mount with perfect center design is compliant VESA mounting standard up to 400mm x 400mm. Great for LG/Samsung/Sony/Vizio/TCL/Hisense/Insignia/Sharp/Panasonic/Toshiba and more..
FULL MOTION & SPACE SAVING: Swivel tv wall mount TV up 3° and down 15°, Swivels TV left or right according to your seats position. Pull out to 16” and retract back to 3”, making your TV alive to move. This corner tv wall mount also enables you to mount your TV in the corner..
EASY INSTALLATION: TV mount with decent instruction and all included hardware in pre-labeled bags. +/-3°post-installation adjustment allows perfect TV leveling..
ULTRA STRONG ARM HOLDS UP TO 80lbs: Tested to hold 4 times the weight they're rated to based on UL standard and made with high grade steel, our heavy-duty swivel TV mount is supposed to hold LED, LCD, OLED flat screen TVs up to 80 lbs..
FRIENDLY SUPPORT TEAM - Please feel free to contact our support team to ask pre-purchase or installation questions. If you run into questions, our customer care team 7 days a week to help you out..

Check Stock

Midland Universal Hood and Trunk Lip Mount with NMO Connector, and 6M Cable - Works with Midland MicroMobile MXT105, MXT115, MXT275, MXT400

NMO CONNECTOR: International standard NMO connector,Suitable for NMO antennas.
[4M(13ft) RG58 Coaxial Cable] PL-259 Plug RG58 Coaxial Cable,Suitable for mobile radio with UHF Female Connector.You can also use adapters to make it work on your other radios.
Stainless steel brackets and corrosion resistance hardware.
Work for Motorola Yaesu Kenwood Icom Vertex Blackbox HYT Hyte mobile radio..

Check Stock

OMAX 0.5X Reduction Lens for Microscope Camera

Mounting size: - Standard C-mount, male 1 inch x 32 tpi for camera - 23.2mm in diameter for ocular tube.
1-year warranty against manufacturing defects.

Check Stock

Shure A55M Shock Mount Microphone Clip - Shockstopper Isolation Mount and Adapter for for Handheld Mics with 3/4 25-30mm Barrel Diameter including Shure models SM KSM Microflex and more

The Shure A55M Shock Mount Microphone Clip reduces transmission of mechanical noise and vibration by more than 20 decibels.
Securely attaches Shure models SM57, SM58, SM86, Beta57A, Beta58A, Beta87A, Beta87C, and KSM109 to standard microphone stands.

Check Stock

JTZ Lens Cloth Donut Knicker for JTZ DP30 FOTGA DP500III Matte Box up to 114mm Large Lens

【STEP UP RING】This is for 49mm Lens Ring Adapter to 80mm Matte Boxes step up ring. These step-up rings can be used for mounting accessories as Matte Boxes (snap on versions and normal ones), 77mm filters or Matte Box filter trays to the lens front..
【DOUBLE SCREW MOUNT】 Our step up rings have 48/49/52/55/58/60/62/67/72/77/82mm male screw on front and 77mm female screw on top with 80mm outside diameter. 48/49/52/55/58/60/62/67/72/77/82mm screw mount can be screws on any lens which have the same size, inside 77mm female thread for attaching filters or other 77mm screw-in accessories.
【2 in 1 function】 Not only it can be used as step up ring which can help you to connect filter with other size, but also allows you to transform the front part of your camera lens into a cinema lens, which means it can be matched with all standard cinema accessories like a Matte box, a filter holder, a Cine Ready cap.
【Material】It is made of high quality metal, so it is durable and can be used for long time with beautiful appearance.
【Note】The width of the 80mm front section is deeper than common step-up, possibility to use professional front caps on all your lenses.

Check Stock

Smatree Microphone Stand Desk Compatible for Shure SM58, Shure SM7B/AT2020 / BM-800 ,Shure SM58 Mic Stand, Mic Stand Desk Mount for Singing, Podcasts & Recording

...djust it to your best angle when you’re singing, podcasts & recording. The steady arm and bracket could swing 360 degree, stop at any direction without moving the base..
【Wide Compatibility Microphone & Tablet】Microphone & Tablet 2 in 1 Stand Holder, With standard 5/8” Microphone threads for connecting most Microphones, Including Shure SM58,Shure SM7B,AT2020, AT2020USB+, Audio-Technica ATR2100-USB, Fifine K669B, BM-800, NW-700, Shure SM58, etc any other microphones with standard 5/8" screw hole.Comes with phone and tablet holder, fit with most of 4.7"- 12.9" cellphones/ tablets including iPhone, iPad Air, iPad Pro/Mini/Air and more.
【Strong & Safe】 - Made of premium solid aluminium alloy and ABS material, flexible adjustable microphone stand for blue yeti snowball holder are great for grabbing your blue yeti mic , more stability and security for your Audio-Technica AT2020 and Fifine K669B ..
【Easy Assembled】Simply assemble the product and you get a complete product right away. it can be attached to any desk up to 10cm thick . Can be mount to places like bed headboard, desk or t....

Check Stock

TRAM 703-HC Center Load CB Antenna Kit

Includes 3.5" magnet mount, shock spring, stainless steel whip & 17ft RG58 cable with PL-259.
Includes 3.5" Magnet Mount, Shock Spring, Stainless Steel Whip & 17- Feet Rg58 Cable Pl-259.

Check Stock

ANLI TA-1UHF Antenna Trunk Mount For SO-239 Thread Antennas

UHF or SO-239 Thread Trunk mount accepts Optional Antennas having a PL-259 " UHF , M or PO " base thread..
For Standard Sedan type Trunks. Includes 15ft RG-58A/U Coax cable with PL-259 Connector..
Great for Amateur radio & Two way mobile antennas having an UHF base thread..
Fits ANLI WH-713 and WH-717 DualBand antennas, & other " UHF" ( SO-239 ) type base thread antennas..
Heavy Duty with 4 Allen bolt connecton and Ability for slight angle Adjustment.

Check Stock