Top 50 Ton Hydraulic Crane Reviews

9TRADING 50 Ton Air/Hydraulic Bottle Jack Super Duty Auto Truck RV Repair Lift with Handle

  • 50 Ton Air / Hydraulic Bottle Jack Super Duty Auto Truck RV Repair Lift w/Handle.
  • This All Purpose Hydraulic Jack Easily Handle Lift Jobs Up To 50 Ton. Can Be Used With Air or Manual. Ideal For Automotive, Heavy Duty Truck Repair, Moving Machinery And Heavy Equipment And A Variety Of. Maintenance Applications.
  • Durable Rugged Steel Construction. Minimum Height: 10-1/2" , Maximum Height: 17".
  • Lifting Height: 6-5/8" , Air Rubber Hose Length: 48" , Air Valve And Inlet: 1/4" X 18NPT.
  • Working Pressure: 120-200PSI , Max Pressure: 220PSI , Comes with 2 Wheels & Handle.
Check Stock

Apex S-CRANE-1000 Pickup Truck Bed Hoist Jib Crane - 1,000 lb Cap

  • Portable pickup truck or trailer bed jib crane allows for one person to easily lift engines, watercraft, and more.
  • Maximum 1,000 lb capacity with boom contracted, and 400 lbs with boom extended.
  • Swivel base rotates 360 degrees with locking arm.
  • 8 Pre-drilled 0.75" holes in a 10.625" square base-plate for mounting to truck or trailer bed.
Check Stock

VEVOR Davit Crane, 1100lbs Pickup Truck Crane, 360°Swivel Design, Hydraulic Crane Hoist Telescopic Hoist Crane for Truck, Crane Hitch for Lifting Goods in Construction, Factory, and Transport

  • 【MAX. 1100 LBS CAPABILITY】- The crane's arms are adjustable in four length classes, with the arms measuring 44" in the shortest case and able to withstand up to 1,100 pounds of lifting. At full extension, the components are 68" length and effectively support up to 500 pounds..
  • 【MANUAL HYDRAULIC PLUNGER】- The truck crane hoist is equipped with a hydraulic plunger. The hydraulic plunger starts simply by turning the handle. The combination of grip and hydraulic plunger makes operation labor-saving and efficient..
  • 【Q235 STEEL & SPRAY PAINT】- The davit winch crane adopts Q345 steel material, also known as alloy steel, which has higher strength than carbon steel. Its low carbon content and low alloying element content effectively improve the stability, plasticity, and welding properties..
  • 【360°BASE SWIVELS】- The base of the davit crane is removable and effortlessly installed. The bottom of the pickup truck crane rotates 360° according to handling requirements. The cantilever is centered on the shaft and swivels in different directions..
  • 【EASY TO STORE & OPERATE】- Davit crane hoist allows a person to easily lift the engine, generators, compressors, and other small equipment into the car. It is widely used in pickup trucks, towing lathes, s....
Check Stock

VEVOR Davit Crane, 2000lbs Pickup Truck Crane, 360°Swivel Design, Hydraulic Crane Hoist Telescopic Hoist Crane for Truck, Crane Hitch for Lifting Goods in Construction, Factory, and Transport

  • Max. 1000 Lbs Capability: The crane's arms are adjustable in four length classes, with the arms measuring 44" in the shortest case and able to withstand up to 2,000 pounds of lifting. At full extension, the components are 68" length and effectively support up to 1000 pounds..
  • Manual Hydraulic Plunger: The truck crane hoist is equipped with a 16" hydraulic plunger. The hydraulic plunger starts simply by turning the handle. The combination of grip and hydraulic plunger makes operation labor-saving and efficient..
  • Q235 Steel & Spray Paint: The davit winch crane adopts Q345 steel material, also known as alloy steel, which has higher strength than carbon steel. Its low carbon content and low alloying element content effectively improve the stability, plasticity, and welding properties..
  • 360° Base Swivels: The base of the davit crane is removable and effortlessly installed. The bottom of the pickup truck crane rotates 360° according to handling requirements. The cantilever is centered on the shaft and swivels in different directions..
  • Easy to Store & Operate: Davit crane hoist allows a person to easily lift the engine, generators, compressors, and other small equipment into the car. It is widely used in pickup trucks, towing lathes, ships, suitable for const....
Check Stock

Honhill 2 Ton Folding Hydraulic Engine Hoist Cherry Picker Shop Crane Hoist Lift Heavy Duty Steel with 6 Iron Caster Wheels for Warehouses, Factory, Ports

  • 2T Load Bearing — 2 ton folding hydraulic made of high grade steel and built in accordance with strict quality and durability standards, it can maintain its shape and is very safe in use. Bearings can weigh up to 2 Ton /4000 pounds..
  • 4 Adjustable Positions and Foldable Design - There are 0.5T/1T/1.5T/2T, a total of 4 adjustable load-bearing positions, which can meet your different needs. The detachable handle is stored by the side ring, and the crane is folded up for easy storage..
  • 6 Independent Casters - Folding engine hoist with 6 rotating wheels, can rotate and swing in any direction to meet your needs in all directions. This is a good choice for transportation engines..
  • Better Stability - The wide base and thick steel legs provide better stability, allowing you to use it more safely and reliably..
  • Lifting Height Range: 0-201cm (0-79.13in), suitable for outdoor, construction sites, ports, warehouses, workshops, factories, etc. Note: The product is shipped separately from the body and base, you will receive two packages.
Check Stock

OTC 1515B 10-Ton Hydraulic Portable Collision Repair Set

  • OTC's 10-Ton Capacity, Portable Hydraulic Collision Repair Set has the power and components to quickly and safely move damaged metal.
  • With this set's heavy duty, single-speed, hand powered hydraulic pump and snap-together components you can exert hydraulic force just where it's needed to lift, spread, bend, or straighten.
  • Handles the high force jobs you face daily in collision repair, trailer maintenance, industrial service, and more.
  • Includes: 10-Ton, 6 Inch Stroke Ram, Hydraulic Hand Pump, Hose, 4 Ext. Tubes, Tube Coupling, 1/2-Ton Spreader, Serrated Saddle, Flat Base, Ram Toe, Std. & 90 Deg. Wedge Heads, Flex Head, Plunger Toe.
  • Rugged molded plastic storage case keeps set contained and organized.
  • features wheels for ease of mobility - simply roll the case to the work.
Check Stock

K Tool International 50 Ton Blue Air Hydraulic Truck Jack HD KTI63198

  • [50-TON CAPACITY] - K tool International service jack rated to lift up to 50 tons or 100,000 lbs..
  • [LIFTING RANGE] - K Tool 50 ton jack has a lifting range from 11.4" to 21.25". Service Jack provides the opportunity for many automotive/truck needs..
  • [BUILT-IN BY-PASS] - K Tool truck jack includes a built-in by -pass device to protect hydraulic system from over pumping damage..
  • [LONG PUMP HANDLE] - Long pump handle with release knob. Works independently of handle position. Handle locks in both vertically at 45 degree angle and horizontally..
  • [NARROW WIDTH] - Truck jack narrow width allows jack to fit between tandem wheels..
Check Stock

VEVOR Hydraulic Long Ram Jack, 4 Tons/8818 lbs Capacity, with Single Piston Pump and Flat Base, Manual Cherry Picker w/Handle, for Garage/Shop Cranes, Engine Lift Hoist, Red

  • Handles up to 4-Ton/8818 lbs: This 4-Ton capacity long ram hydraulic jack helps you convert your existing hoist to a convenient and fast one. A quick way to raise loads without the backache. A must-have for hydraulic cranes, engine hoists, and a wide variety of applications..
  • 24" -43.7" Lifting Range: Minimum height: 24 in/61 cm. Maximum height: 43.7 in/111 cm. The long ram hydraulic round bottom jack provides an ample 19.7 in/50 cm stroke for the optimal lift of objects up to 4 ton/8818 lb. in weight. And the slow release function for reliability and security..
  • Reliable & Durable Jack: Large diameter hydraulic steel cylinder unit results in lower oil pressure needed to move the load, which helps to reduce wear and extend service life. The piston-ram is treated and polished to resist skiving and utilizes a Y-Style polyurethane sealing ring with a backup ring, preventing the load from falling slowly or bypassing oil drift..
  • Labor-saving Long Ram: Long ram jack features a convenient handle with a rubberized comfort grip. The flat base allows the jack mounts directly onto most shop cranes. And the glide-action pressure pump is designed to lift with minimal muscle and effort..
  • Sturdy Steel Construction: Durable frame is constructed of high-grade steel and bu....
Check Stock

VEVOR Hydraulic Long Ram Jack, 3 Tons/6600 lbs Capacity, with Single Piston Pump and Clevis Base, Manual Cherry Picker w/Handle, for Garage/Shop Cranes, Engine Lift Hoist, Black

  • Handles up to 3-Ton/6600 lbs: This 3-Ton capacity long ram hydraulic jack helps you convert your existing hoist to a convenient and fast one. A quick way to raise loads without the backache. A must-have for hydraulic cranes, engine hoists, and a wide variety of applications..
  • 26" -45.7" Lifting Range: Minimum height: 26 in/66 cm. Maximum height: 45.7 in/116 cm. The long ram hydraulic round bottom jack provides an ample 19.7 in/50 cm stroke for the optimal lift of objects up to 3 ton/6600 lb. in weight. And the slow release function for reliability and security..
  • Reliable & Durable Jack: Large diameter hydraulic steel cylinder unit results in lower oil pressure needed to move the load, which helps to reduce wear and extend service life. The piston-ram is treated and polished to resist skiving and utilizes a Y-Style polyurethane sealing ring with a backup ring, preventing the load from falling slowly or bypassing oil drift..
  • Labor-saving Long Ram: Long ram jack features a convenient handle with a rubberized comfort grip. Clevis style base allows the jack mounts directly onto most shop cranes. And the glide-action pressure pump is designed to lift with minimal muscle and effort..
  • Sturdy Steel Construction: Durable frame is constructed of high-grade steel an....
Check Stock

The Terminator

  • Hydraulic bottle jack designed for residential and commercial use.
  • Serrated, heat treated saddle provides generous lifting area and secure grip.
  • Features a lifting range of 11" to 17-3/4" with a 50 ton (100,000 lb) capacity.
  • Engineered using a drop forged alloyed steel construction for quality and durability.
  • Inner/outer welded structure delivers leak-free performance.
  • Glide-action pressure pump is designed to lift with minimal effort.
  • Integrated built-in oil-bypass and overload valve that protects the hydraulic system from extending beyond limits.
  • Meets ASME PASE safety standards and includes a limited 1 year manufacturer warranty.
Check Stock

10000 psi Hydraulic Hand Pump 2 Speed Power Pack Hydraulic Lifting Pump

  • Maximum operating pressure of 10,000 pounds per square inch (psi)，Two-speed Plunger Improves Pump Efficiency By 70%.
  • Advances and releases design for applications with a constantly applied load Pressure relief valve (Oil return knob)helps prevent pump overload, switch( venting nut) on the tail of it avoid sealed of oil box.
  • Oil capacity: 700cc, 2M high pressure hose ，oil pipe coupling with PT3/8 thread.
  • Manual Hydraulic Pump is durable, smooth surface and good sealing performance. Integral Casting Pump Body, Durable, Stable And Reliable.
  • High-pressure hydraulic hand pump for 5 ton to 200 ton hydraulic ram cylinders or split unit hydraulic puller and other hydraulic applications.
Check Stock

5 Gallon Bubble Magic Washing Machine + Ice Hash Extraction 5 Bags Kit GROW1

  • THE MONSTER PRESS - The Best 8-Ton / 16,000 Pound Hydraulic Ram Press in the Market - Capacity Out of: 5" x 7" Inch Bricks with up to 3" Inches Deep in Thickness,.
  • High Tech Hydraulic Presses Are Recommanded & Used by Professionals. High Tech Innovative Original & Proven Desgined Presses are fully machined presses built from aircraft aluminum. All of our Presses are a precision state-of-the-art piece of equipment,.
  • Made in USA - HighTech Hydraulic Press Has Been America's Premeir Brand of The Most Outstanding Presses in the World. Such as, the best selling 4-Ton Brick Press, the 8-Ton Monster Press & the new, 10-Ton, The Big Bastard Press,.
  • Easy to Clean. Does Not Get Hot. Durable. Can be used repeatedly many times for a long time. Does not contain any harmful objects or materials,.
  • Capable of Getting Heated. Monster Press has no Limits. When heated, the aircraft aluminum transfers and retains heat much more efficiently and effectively than steel. (Other Presses are made out of steel not aircraft aluminum). Utilizing machined aluminum (instead of welded steel) allows Hightech Presses to be constructed from one solid piece of material so there are no seams or gaps and everything fits together perfectly for the life of the Press..
Check Stock

5 Gallon Bubble Magic Washing Machine + Ice Hash Extraction 5 Bags Kit

  • The machine is made of 6061 aluminum, 4-piece of chrome steel and 12 ton hydraulic cylinder..
  • Dual heating rods for each 4x7" heated platen - 300 watts per rod, 1,200 watts in total..
  • Recommend pairing it with 12 ton hydraulic hand pump (dp-cp590g) or other pump with NPT 1/4" male coupler..
  • Both PID temp controller and hydraulic cylinder allow replacing for a long service life..
  • Dual 15mm thick insulation wood to protect the equipment from overheating..
Check Stock