Top 5 sided Milling Reviews

AUTOTOOLHOME 3/16' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/16 in)

  • AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • Carbide milling bits Diameter: 3/16'', Shank Diameter: 3/16'', Flute length: 5/8'', Overall Length: 2", 4 Flutes.
  • This 3/16 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
  • End Mill router bits are used for side milling, end milling, finish machining, etc..
Check Stock

OSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box

  • APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
  • Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
  • Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
  • Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
  • These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.
Check Stock

NutriMill Plus Grain/Flour Mill Electric High Speed Grinder

  • 24 Cup Bowl Capacity with Collapsable Hopper and Clever Nesting Design for Easy Storage.
  • Flour Canister Sits Side by Side During Operation. The Patent Pending 4 Stage Filtration System for Ultra Clean Milling.
  • 1200 Watt, 2 Speed Motor uses Stainless Steel Microburst Milling Heads with a Limited Lifetime Warranty.
  • Patent Pending "Whisper Quiet" Technology for Lowest Decibel Milling Experience (15% Quieter than the NutriMill Classic).
  • Mill Fresh Flour Directly Into the Canister or Into Freezer Safe Bags. Flour Bagger Accessory and Extra Bags are Included..
Check Stock

Milling Cutter, 3.175x2x17mm Straight Shank Engraving Good Durability Spiral Milling Cutter Tungsten Steel Milling Cutter Milling Cutter Single for Repair Tool

  • Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
  • The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
  • The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
  • The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
  • The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..
Check Stock

Kodiak Cutting Tools KCT133263 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/8\ Shank, 1/2\ Length of Cut, 1-1/2\ Overall Length, 1/8\ Diameter

  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Mega Mini R8 Milling Machine, the only True Inch machine on the market, .50 inch-per-turn table feed screw, a powerful brushless 500W motor

  • X-Axis Power Feed: The X-Axis power table feed is made of sturdy aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. Voltage: 110V, 60Hz. Revolution Speed: 0-200 RPM. High quality and efficiency to handle all your milling needs..
  • Long Service Life: The power feed for the milling machine features a smooth and strengthened polished surface, which is waterproof, dustproof, and oilproof. That ensures a long service life in harsh working conditions..
  • High Efficiency & Precision: The x-axis power feed is equipped with spiral bevel gears for rapid control. There are bearings to achieve high efficiency and precision as well..
  • Low Noise & Easy Operation: The milling machine power feed features 9 levels of moving speeds, set by the rotary knob on the side. Moreover, it makes little noise when used, an essential piece of equipment for every workshop..
  • Wide Compatibility: This milling table power feed fits multiple vertical knee-type mills with the same mounting pattern and a 5/8" diameter shaft on the end. Such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc..
Check Stock

AUTOTOOLHOME 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ 1/2\ high Speed Steel HSS 4 Flute Straight End Mill Cutter 5/32\ 1/16\ Set of 8

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

OREI eARC 4K 60Hz Audio Extractor Converter 18G HDMI 2.0 ARC Support - HDCP 2.2 - Dolby Digital/DTS Passthrough CEC, HDR, Dolby Vision HDR10 Support (HDA-927)

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

SpeTool 5Pcs 2-Flute Square Nose Carbide End Mill 1/8 Inch Router Bit with 1/8 inch Shank CNC Machine Tools, TiAlN Coated

  • ENDMILL SIZE. 1/8" shank, 1/8" cutting diameter, 1/2" cutting length, 1-1/2" over all length.
  • SPECIFICATION. Flat top, 2-flute, HRC55 with tialn coated, use 1/8" collet.
  • PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology.
  • excellent cutting results and enhanced productivity.
  • WIDE APPLICATION. For cnc, engraving machine, carbon steel, mould steel, inconel, stainless steel, titanium alloy etc.
  • suitable for side milling, end milling, finish machining, etc..
  • PACKAGE INCLUDE. 5 pieces high quality end mill pack in a individual plastic box.
Check Stock

SpeTool 5Pcs/Set Flat Nose Double Flute Carbide End Mill 1/32' Cutting Dia Router Bits Cutter CNC Machine Tools for Carbon Steel Soft Alloy Steel Die Steel Tool Steel Cast Iron Wood

  • SIZE. 1/8" shank, 1/32" cutting diameter, 5/64" cutting length, 1-1/2" over all length.
  • SPECIFICATION. Flat top, 2-flute, HRC55 with tialn coated, use 1/8" collet.
  • PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology.
  • excellent cutting results and enhanced productivity.
  • WIDE APPLICATION. For cnc, engraving machine, carbon steel, mould steel, inconel, stainless steel, titanium alloy etc.
  • suitable for side milling, end milling, finish machining, etc..
  • PACKAGE INCLUDE. 5 pieces high quality end mill pack in a individual plastic box.
Check Stock

Accusize Industrial Tools 3'' by 1'' 90 Deg. Square Shoulder Indexable Face Mill with 17 Pcs Apkt1604 Inserts, 4508-0018b+0056-1604

  • All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
Check Stock

Milling on the Drill Press (DVD, 4 Hours)

  • 【Much More Powerful】The motor power of RCOG-25V milling drilling machine has a 1100W brushless spindle drive motor providing tremendous torque and variable speeds from 50-22250 RPM continuously, with overload and overheating protection fuction.The noise of this motor is very low and it is very easy to maintain.So much power will make your work much more efficient..
  • 【Parameters】Metric Scale MT3 Milling Machine adopts high precision grinding all steel spindle with excellent strength grinding gear,X axis:18.9",Y axis:6.9",Z axis:11",it has own DRO for 3 axis.Headstock swivels 360 degrees.Max drilling diameter:0.9",Max Face screening capacity:2.5",Max vertical milling capacity:0.79",Distance from spindle to table:13.8",Spindle taper:MT3,Table size:27.5"x7.1".The speed display shows inch..
  • 【Micro-Feed Precision】Benchtop Milling Drilling Machine has a micro-feed function,the accuracy is up to 0.01'', only need to tighten the middle nut of the right hand wheel to achieve the micro-feed function, loosen the nut to achieve the manual up and down movement function.Integrated cross worktable,width is widened,with high pr....
Check Stock

HHIP 3900-1005 5-Piece R8 End Mill Holder Set, 3/16-3/4'

  • 5 PC SET 3/16, 3/8, 1/2, 5/8, 3/4" DRAWBAR END THREAD: 7/16" -20.
  • Hardened and ground For Bridgeport type milling machines.
  • Hardened and ground. For double and single end mills (single end mils only for sizes over 5/8").
  • 5 PC SET For Bridgeport type milling machines. DRAWBAR END THREAD: 7/16" -20.
  • For double and single end mills (single end mils only for sizes over 5/8").
Check Stock