Top 4ch Stereo Amplifier Reviews

Memphis MXA850.5M 5-Channel Marine Amplifier

  • RMS Power/CH @ 4Ω: 60W x 4Ch + 175W x 1CH RMS Power/CH @ 2Ω: 100W x 4CH + 300W x 1CH RMS Power/CH @ 1Ω: 450W x 1CH RMS Power/Bridged 4Ω: 235W x 2CH THD.
  • Frequency Response: 20Hz – 20KHz/20Hz – 250Hz.
Check Stock

(2)Rockville RSG12 12 3Way 1000 Watt 8Ohm Passive DJ PA Speaker +Stands +Cables

  • What's in the Box: Amplifier, PA microphone, Birth sheet with Dyno-tested power, Mounting Screw Kit, Owner’s manual, Warranty..
  • Features: Rockville ATOM S20 1600 Watt Peak/440 Watt Dyno-Certified RMS 4 Channel Class AB Marine Stereo Amplifier With Bluetooth, Digital Voltage Display on Amp, Microphone input and PA microphone included, Adjustable Low Pass Filter: 50Hz - 250Hz, Adjustable High Pass Filter: 50Hz - 250Hz, Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue), Rustproof Aluminum heat sink with silver hairline finish, Stainless steel end panels are rustproof, Bottom panel is aluminum and rustproof..
  • Dyno Certified RMS Power Ratings - 2 Ohm: 110 Watts x 4 Channel 003c1% THD+N @ 14.4 Volts. 4 Ohm: 70 Watts x 4 Channel 003c1% THD+N @ 14.4 Volts. 4 Ohm Bridged: 220 Watts x 2 Channel 003c1% THD+N @ 14.4 Volts..
  • Peak: 2 Ohm: 400 Watts x 4 Channel. 4 Ohm: 260 Watts x 4 Channel. 4 Ohm Bridged: 800 Watts x 2 Channel. (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc).
  • 25 Amp x 2 ATC Fuse, Frequency Response: 10Hz - 50KHz, Bluetooth On Mode LED Indicator, Status Mode LED Indicator, 8 Volt Preamp Circuitry, RCA Line Output, Bluetooth On and Off Mode Switch, 2CH/4CH Input Mode Switch, Mute and Delay ....
Check Stock

SHCA Colored BASS KNOB with Leads (Blue)

  • Simple Connection: the Rca Volume Control RCA output connector to the car stereo and the input RCA connector to the device, no additional wires are required. With RCA composite cables,this amplifier controller offers high-quality signal transmission.Adds subwoof level control to any head unit or balances a multiple amplifier installation.
  • This RCA amplifier controller offers high-quality signal transmission with RCA composite cables.Made from high quality materials and metal for optimal signal transfer.Adds subwoof level control to any head unit. Perfect for balancing the system to change music style.
  • Perfect for balancing the system to change music styles, control your sub-woofer output, you can set the subwoofer on maximum gain and then vary the knob to taste as per genre or media good fit for Car, Motorcycle, Speakers, Home.Stereo RCA input and output. Simple in and out connections,no additional wiring needed.Mini size easy to installation by DIY without manuals.
  • RCA amplifier is control the gain level / volume of devices connected to the car stereo, such as speaker, amplifier, bass, etc. Dash Mount Amplifier Level Control for Volume Adjustment. dash mount rca amplifier level control is used to adjust amplifier gain, power level, stereo, equalizer or....
Check Stock

Fifine Headphone Amplifier 4 Channels Metal Stereo Audio Amplifier,Mini Earphone Splitter with Power Adapter-4x Quarter Inch Balanced TRS Headphones Output and TRS Audio Input for Sound Mixer-N6

  • 【Share A Single Stereo Source】Amplifier 4 channel with separate volume knob for each of up to four outputs: No audio crackle, minimal distortion at highest volumes. No loss of signal when all four headphones are connected. Headphone amplifier 4 channel would be excellent for up to four people monitoring the mix for tracking, live uses and listen to the TV with earbuds while working out..
  • 【Fantastic Stereo Audio Quality】Mini stereo amplifier with 4X 1/4'' Stereo Headphone TRS Output Connector Jacks, 1/4'' TRS Source Input Connector Jack. ◆Stereo ◆: You must use the 1/4” TRS stereo audio cable male to male connectors for input and output connection. ◆Mono◆: 1/4” TS male to male connectors for input and output connection. ■■TRS/TS cable is not included in package■■.
  • 【Compact and Portable】Solid metal build construction headphone splitter, tight connections, smoothly operating knobs. Quality components and exceptionally rugged construction ensure long life. Ultra-compact headphone distribution amplifier for studio and stage applications..
  • 【Used for Applications】Features a durable and compact design headset amplifier perfect for both on-stage and in-studio performances or application that requires multiple headphone connect....
Check Stock

LANZAR HTG447 2000W Bridgeable 4 Channel MOSFET Car Audio Amplifier Power Amp

  • lanzar - htg447 - lanzar htg447 2000 watt 4 channel car digital amplifier amp 4ch 2000w.
Check Stock

ST4.500D - Soundstream 4-Channel 500W Max Class-D Amplifier

  • Premium High-Efficiency Class D Amplifier.
  • Hybrid Aluminum Alloy Heatsink for Optimum Dissipation.
  • Full Variable 12dB High Pass, Low Pass Crossovers.
Check Stock

LZSIG Home Audio Amplifier Stereo Receivers with Phono Inputs,Bluetooth,RMS 240W,2.1-CH FM for Power Amplifier Stereo System,UPG for Active Subwoofer,Turntable,Vinyl Record Player

  • 240 WATTS TOSHIBA POWER TUBE - LZSIG home stereo amplifier receiver is driven by 4 Toshiba large power tubes to achieve 120W(L) channel+120W(R) 2.1 channel combination. Frequency response range:20-15000Hz,signal-to-noise ratio is as high as 82dB. Recommended to match a pair of dual 6.5-inch to 10-inch floor-standing front passive speakers to amplify and enjoy your home audio experience in the comfort of your home.
  • UPGRADED VERSION for PHONOGRAPH - The sound amplification mixer device can perfect match the MM or MC type phonograph.When using the MC type, please press the rear switch button.Furthermore,this home audio receiver is compatible with vinyl record player, active subwoofer, passive bookshelf speaker, front speaker, surround speaker, outdoor speaker, smartphones, iPads, iPhones and computers, which is widely used in home audio, bedroom, conference, karaoke, bar, etc.
  • 2.1 channel design - In addition to the left and right stereo design, the dual-channel multifunction digital stereo amplifier receiver also adds a bass output channel to form a 2.1 channel stereo + subwoofer wall of sound effect with various active subwoofers, allowing you to enjoy extraordinary professional sound quality. With Auto FM radio, digital LED display, RCA line in and lin....
Check Stock

Herdio 5.25 Inch Ceiling Speakers 600W 2-Way Flush Mount with Bluetooth Wall Mount Amplifier Receiver Perfect for Home Theater Bathroom Living Room Kitchen Office 4 Speakers

  • 【Bluetooth Connection 】Independent 4-channel wall-mounted Bluetooth amplifier designed for one set of 4 in ceiling speakers so that bring you....
  • 【150 Watts Each 】The Herdio Blutooth Ceiling Speakers Max Power up to 600 Watts ,and the highlight of this 5.25" speakers' design is the rich....
  • 【More Functions with Amplifier】MIC IN /USB /AUX IN Function: The in wall amplifier features USB flash memory reader for media playback which also....
  • 【Easy Install & Dimension】The HCS528-16BT-4CH-US use flush mount design allow for easy in-wall/in-ceiling installation.Stylish white appearance is....
  • 【Package Include & Service】5.25" speakers x 4 , Speakers Connection Wires x 2, in-wall bluetooth audio receiver wall plateX1,Power adapater X 1 In....
Check Stock

Universal RCA Level Controller Car Amplifier Audio RCA Amplifier Gain Level Bass Amplifier Volume Control Knob Sub Amp Volume Control Cable for Car, Motorcycle, Speakers, Home Theater(2022 Version)

  • This RCA amplifier controller offers high-quality signal transmission with RCA composite cables.Made from high quality materials and metal for optimal signal transfer.Adds subwoof level control to any head unit. Perfect for balancing the system to change music style.
  • Simple Connection: the Rca Volume Control RCA output connector to the car stereo and the input RCA connector to the device, no additional wires are required. With RCA composite cables,this amplifier controller offers high-quality signal transmission.Adds subwoof level control to any head unit or balances a multiple amplifier installation.
  • RCA amplifier is control the gain level / volume of devices connected to the car stereo, such as speaker, amplifier, bass, etc. Dash Mount Amplifier Level Control for Volume Adjustment. dash mount rca amplifier level control is used to adjust amplifier gain, power level, stereo, equalizer or crossover volume when you driving.
  • Perfect for balancing the system to change music styles, control your sub-woofer output, you can set the subwoofer on maximum gain and then vary the knob to taste as per genre or media good fit for Car, Motorcycle, Speakers, Home.Stereo RCA input and output. Simple in and out connections,no additional wiring needed.Mini size easy to i....
Check Stock

Bluetooth HiFi Mini Audio Amplifier - Class D Digital Desktop PC Stereo Amplifier Receiver (2 x 100 Watt MAX) Aluminum Diecast- Pyle PDA20BT, Micro Amp

  • DESKTOP AUDIO AMPLIFIER: Take control of your sound with hi-powered, mini-style component stereo amplifier performance - enjoy wireless streaming ability with the Mini Blue Series Home Amplifiers.
  • COMPACT SOUND CONTROL: Multi-channel amplifier design paired with convenient audio configuration unlocks home theater stereo system ability right on your computer desktop - gain access to digital sound control with compact amplifier receiver power.
  • BLUETOOTH STREAMING RECEIVER: Simple & hassle-free Bluetooth amplifier pairing allows you to connect and play your music to connected speakers and radio systems.
  • 2x100 WATT POWER: The 2 Channel Pyle Bluetooth Stereo Amplifier Receiver is perfect for your karaoke and home theater acoustic sound system. Gives you 200W power w/ 100W RMS, accommodates 2 sets of speakers, lets you enjoy high quality amplified audio.
  • VERSATILE MINI COMPONENT AMPLIFIER: Connect to external devices like radios, speakers and microphones - or use the 1/4’’ headphone jack for private listening from your home PC desk - features rear panel quick connect push-type speaker terminals.
Check Stock

HiFi Headphone Amplifier Portable 3.5mm Stereo Earphone Audio Amplifier 200Mah Lithium Battery Mobile Phone

  • HIFI SOUNDThe HIFI sound make noise reduction and dynamic enhanced distortion, is perfect pure stereo effect and high definition music sound quality optimization..
  • MINI HIFI POWER AMPLIFIERThe mini HiFi power amplifier is delicate, small, and portable. The enhanced output can enjoy high definition and the high level sound effects at all times..
  • WIDE COMPATIBILITYThe stereo amplifier ia specially designed for mobile phones, can also be used for car audio, outdoor speakers, etc. The 3.5 mm AUX input and output, 95DB SNR and THD + N < 0.006%, not only can output louder voice, but also can output a clearer, more real stereo.
  • 200MAH LITHIUMThe headphone amplifier use rechargeable lithium battery, it adopts 200mah capacity rechargeable lithium battery that can work for a long time..
  • HIGH DEFINITION STEREO SOUNDYou can improve the sound quality of your smartphone so that you can enjoy high definition pure stereo sound without losing the truth.DescriptionDescription:.
  • Are you still worried about this? Every time you listen to a song on your cell phone, the sound is stiff, dry and cold. Low frequency reduction is insufficient, listening is weak, audio output has digital flavor bias. From now on, you won't be troubled by these problems any more. This sound amplifi....
Check Stock

Pyle Car Stereo Wiring Kit - Audio Amplifier & Subwoofer Speaker Installation Cables (4 Gauge), Blue (PLAM40) & PAC SNI-35 Variable LOC Line Out Converter

  • Product 1: CAR AUDIO WIRING: Universal car stereo audio system cable and wire kit. Includes all necessary pieces to set up your amplifier and subwoofer speakers.
  • Product 1: INCLUDED AUDIO CABLES: 20’ ft. 4 gauge red power wire, 4’ ft. 4 gauge black ground wire, 20’ ft. 16 gauge blue remote turn-on, 20’ ft. 12 gauge stereo speaker wire.
  • Product 1: MORE AUDIO CONNECTION: 20’ ft. stereo RCA audio cable, 6’ ft. black split loom cable conduit - enables connection for amplifier and subwoofer speakers.
  • Product 1: CAR STEREO SOUND: Also includes (2) ring terminals 8G, (2) spade terminals: 8G, (5) spade terminals: 14-16G, (3) butt connector, (20) cable ties, (1) black grommet.
  • Product 2: Adjustable Line Output Converter.
  • Product 2: Use the SNI-35 when adding an amplifier to a factory radio to convert the radio's speaker level output to the lower amplifier (RCA) level input.
  • Product 2: Utilize Audio Transformer for Noise Isolation.
Check Stock

Moukey Headphone Amp Amplifier 4 Channels Metal Stereo Audio Amplifier,Mini Headphone Splitter-4x Quarter Inch Balanced TRS Headphone Output and TRS Audio Input, DC5V Power Supply-MHAMP1

  • 【Stereo sound source】Amplifier 4 channels, with independent volume knob, can be used for up to four outputs: no sound burst, minimum distortion at maximum volume. When all four headphones are connected, the signal is not lost. The 4-channel headphone amplifier will be excellent, allowing up to four people to monitor the mix simultaneously for tracking..
  • 【Stereo independent control】 Independent MONO/STEREO control buttons is easy to control mono and stereo audio source, when your audio source is mono input, you can press the stereo button to simulate the stereo effect..
  • 【Stereo quality】Mini stereo amplifier with 4X 1/4 "stereo headphones TRS output connector jack, 1/4" TRS source input connector jack. ◆ Stereo ◆: You must use 1/4 ”TRS stereo audio cable for male-to-male connector for input and output connection. ◆ Mono ◆: 1/4” TS for male-to-male connector for input and output connection Device. ■■ TRS / TS cable is not included in the packaging.
  • 【DC 5V power supply】DC 5V power supply-This product uses the latest DC 5V power supply mode, so no longer restricts the application scenarios. Adapter included..
  • 【Lightweight and simple】Sturdy metal structure headphone mixer, tight connection, smooth operation knob. Ideal for s....
Check Stock