Maikrt Embedded QR Code Scanning Module USB and UART Serial Port Barcode Scanner Identification Module Bar Code Reader for Access Control, Locker Scan Code Payment etc
A small 1D/2D codes reader,Can be embedded in any device for scanning code to identify other items, by using the intelligent image recognition algorithm.Configurable via scanning 'configuration code',Module matching light source, Can work in the dark..
Embedded QR code scanning module is used for access control, channel gate, locker, scan code payment, etc. And other industry equipment to achieve smart project,The performance is stable and the decoding speed is very fast..
2D/QR code scanning module support linux,Android, windows and other systems, Can easily capture bar codes 1D, 2D on labels, paper, and mobile phone or computer displays,Sensitive and accurately..
USB and TTL dual interface, equipped with 9pin terminal line and USB cable, which is convenient for you to convert between UART TTL serial port and USB interface. No need to worry about the use of interface types..
After receiving our products, connect to the line, after power-on That can scan the code.
The module scans the code directly and sends the result to your host computer automatically. After receiving the data, the host computer can proceed to the next step..
Baluue 10pcs Vibration Sensor Module Normally Closed Alarm Switch Module High Sensitive Efficient Vibration Switch Module for Car Truck Auto Vehicle
TCRT5000 infrared emitting diode constantly launch infrared sensor, the infrared ray is emitted when reflected back were not reflected or but strength is not big enough, the infrared receiving tube has been in the off state, the output end of the module at this time as the low level, indicating diode has been put out state.
Tested objects appear within the scope of testing, infrared light is reflected back and strength is enough big, infrared receiving tube saturation, at this time the output of the module for the high level, indicating diode lit up..
Abovehill 12V Wireless RF Remote Control Relay Switch Universal 1-Channel 315MHz Receiver with 1 Transmitters for Garage Door Openers, Cars, LED Lights & More
[Wireless Remote Control Module] Its coding type is fixed code and learning code. The control mode is three modes: jog, self-lock and interlock. Delivery defaults to jog mode. If you need to switch to self-locking or interlock mode. You need to change the contacts labeled “L” and “T” on the back of the receiving module..
[Wireless Remote Control Module] It also has learning and deletion capabilities. The operation is very simple and detailed in the product description..
[Wireless Remote Control Module] A wide range of applications, from simple home remote control to autonomous control, such as windows, entrances, garage doors, alarm systems, lifting equipment, etc. Note: If you encounter any problems, please send us an email and we will be here to help you. Thank you..
【One-year after-sale warranty】The PWM to voltage module converts PWM digital signals to 0 to 10V analog signals. It can be used to switch the signal interface of PLC or other industrial control board. Adjust the output voltage by adjusting the PWM duty cycle. The module is small in size and easy to apply in different places.003cbr003e.
Using MCU embedded technology. Easy to operate, can be fine-tuned by potentiometer.003cbr003e.
Select the PWM signal input level range by short circuit. The module is small, easy to carry and easy to use.003cbr003e.
(current greater than 100mA),PWM signal receiving frequency range: 1KHZ-3KHZ.
When power on for the first time, it is best to do a calibration and debugging: find a signal with a 50% duty cycle and connect it to PWM and GND. Jumper caps set the corresponding voltage range. When the frequency is 1KHZ-3KHZ, use a multimeter to measure the two ports of VOUT and GND. At this time, the meter displays about 5V. Adjust the potentiometer on the board so that the multimeter displays 5.00v.003cbr003e.
Onyehn 1set Wireless Bluetooth WiFi card Module Board with Antenna Cable Part for Xbox One Replacement Pulled
If you have any questions after receiving the goods, please contact the after-sales service. If it doesn't work, we will provide a full refund. Please....
Original and Pulled From Microsoft Xbox One Coonosle.(Note: Because it is removed in the original machine, the Bluetooth module scratches are....
Replace the WIFI Module, it Can Solve the Wireless Controller Disconnected (Broken) Problem..
If Your Controllers Don't Sync, Or If Wifi Access Points No Longer Show Up Then This Could Be the Part You Need..
Package Includes: 1 x Card Module, 1 x Antenna Cable..
Replacement for OEM: Cool Toner Compatible for Brother TN433 TN-433 TN 433 TN433BK TN433C TN433M TN433Y High Yield Toner Cartridges also Available in Standard Yield TN431 TN-431 TN 431 TN431BK TN-431C TN-431M TN-431Y Toner Cartridges.
Compatible for Printer: for Brother MFC-L8900CDW toner, MFC-L8610CDW, HL-L8360CDW, HL-L8260CDW, HL-L8360CDWT Color Laser All-in-One Printer.
High Yield: 4,500 Pages (Black) and 4,000 Pages (Color) Based on 5% coverage (Letter/A4).
Package Contents: ColorKing TN433 Toner Cartridge including 1 x TN433BK, 1 x TN433M, 1 x TN433C, 1 x TN433Y (Total 4 Pack With Chip) Compatible for....
Page Yield: TN433 TN431 is 4500 Pages Per Black Toner Cartridge, TN433 TN431 is 4000 Pages Per Color Toner Cartridge at 5 Percent Coverage of A4 Paper.
Compatible for Printers: Brother Color Laser HL-L8260CDW HL-L8360CDWHL-L8360CDWT HL-L9310CDW MFC-L8690CDW MFC-L8900CDW MFC-L8610CDW MFC-L8905CDW....
High Performance: ColorKing TN433BK/C/M/Y, TN431BK/C/M/Y High Yield Toner Cartridge Delivers Sharp Texts, Crisp Images and Stable Compatibility, No....