Top 40 130db Meter Reviews

Digital Sound Level Meter,Sound Meter for Classroom Home Street,30-130dBA dB Meter to Measure Noise,Noise Decibel Reader,Audio Sound Tester,Sound Testing equipmetent,Sound Measurement Device

  • 【Widely Used】The noise meter is the use of environmental sound level instrument, can be widely used in such as factories, workshops, schools, residential, office areas, traffic roads, audio and other occasions of sound level measurement. Also suitable for noise engineering, product quality control, health,prevention and control..
  • 【Accurate Measurement】Measuring Range:30~130dB.
  • 【A Weighted Measurement】 A Weighted network (automatic switching range display).
  • 【Fast/Slow mode selection】Press the MODE key, you can convert the response speed of the noise meter, FAST fast, SLOW slow.
  • 【MAX/MIN Measurement】Press RANGE key to measure the maximum value of MAX and minimum value of MIN.
  • 【Result Hold】The measurement result (HOLD) function.
  • Press the HOLD key to hold the measured sound level value.
  • 【Sound level OVER or UNDER indicates】If the display displays “UNDER” or “OVER” characters, the sound level is lower than 30dB or higher than 130dB..
  • 【LCD with backlight】After power-on, the backlight will automatically light up and turn off after 30 seconds. Press the backlight button to turn on the backlight..
  • 【Automatic SHUTDOWN】3 minutes after the stop button, the meter....
Check Stock

Cadrim Decibel Meter - Digital Sound Level Meter, Self-Calibration Decibel Reader, Noise Meter with LCD Display Measurement Range 40-130 dB spl Meter (Battery Included)…

  • 【Max / Min / Hold Function】Cadrim decibel meter can record the current maximum or minimum decibel value.
  • the hold function freezes the reading on the display without worrying that the reading is too fast to record..
  • 【Accurate and Sensitive 】0.5s response time, no contact. Can measure noise level under any circumstances, quickly display accurate measurement result.Measuring Range 40~130dBA.
  • +/-3.5dB Accuracy with 0.1dB Resolution.Frequency range from 31.5 to 4Khz.(When the range is exceeded, this decible meter will display "OL".).
  • 【Digital LCD Display& Backlight Function 】The Digital Sound Level Meter has a large clear LCD backlight display that can show the measurement clearly. Long press "Hold" to turn on the backlight to get the easy reading during the night and reduce the damage to the eyes..
  • 【Auto Power-off Function 】When the decibel reader is not used, it will automatically turn off after 15 minutes to save battery life. (With a 1x 9v battery, a single 9v battery can last for 30 hours.).
  • 【Convenient and Lightweight 】Cadrim sound pressure level (SPL) meter is lightweight and easy to carry. With a mounting hole for the tripod,which can be placed on the stand and is easier to measure when your hands are busy. It's widely used in ....
Check Stock

Decibel Meter, LONVOX Digital Sound Level Meter with 30 to 130 dBA Measuring Range, Backlit LCD Display, MAX/MIN Noise Measurement, Data Hold, SPL Meter for Classroom, Noisy Neighbor, Office, Factory

  • [Broad Measuring Range & High Precision] – LONVOX Decibel Meter features a highly sensitive and precise condenser microphone that is capable to measure noise levels from 30 to 130 dB with an accuracy of ±1.5 dB. The dB meter is A-weighted, which is ideal for the measurement of environmental noise, such as traffic noise, baby room noise, classroom noise, home theater noise, industrial noise, and so forth. The sampling rate is 2 times per second, which is ideal for dB tests in various contexts..
  • [Backlit LCD Display & Versatile Uses] – LONVOX sound level meter features a large backlit LCD display with 4 digits and 0.1 dB resolution, ensuring readouts are clearly visible, and easy operation in a low-light environment. When sound levels exceed the setup value, the backlit display will keep flashing as a visual alarm. Maximum or minimum dB level can be assessed by the sound meter. The data hold function can freeze the current readout of sound measurement based on personal needs..
  • [Ergonomic & Lightweight Design] – The sound pressure level (SPL) meter is light in weight and compact in size, which is easy to carry. The lightweight design allows long-time operation with less muscle fatigue. The compact design ensures the noise meter fits into your hand ....
Check Stock

Decibel Meter, CURCONSA SPL Meter, Portable Sound Level Meter, 30dB to 130dB, LCD Display, can be Used in Homes, Factories and Streets(Blue)

  • ❤【Widely Used】 A decibel meter is an instrument used to measure ambient sound levels. Decibel meter can be used in homes, factories, workshops, schools, residential areas, offices, streets, hotels, hospitals, laboratories, theaters and sound systems, the scope of application is very wide and an indispensable tool in life.
  • ❤【High Precision】 The measuring range of the sound level meter is 30dB to 130dB with fast response speed and stable and reliable performance. Sound level meter is a high-precision noise meter with an accuracy of ± 2.0 dB. Real-time monitoring can give you accurate data on the sound level in the area.
  • ❤【A / C Double-weighting Measurement】 The A-weighting simulates the frequency characteristics of low-intensity human ear noise, which is suitable for the detection of ambient noise. The C-weighting simulates the frequency properties of high-intensity noises of the human ear, which are suitable for the sound pressure analysis of machine motors and machines. More professional measurement methods provide users with a more perfect user experience.
  • ❤【Fast and Slow Response Rate Conversion】 The spl meter has the function of converting the fast and slow response rate. The fast response rate uses a time constant of 125 mil....
Check Stock

ennoLogic Decibel Meter and Recorder eS528L with Updated 2023 Software – Digital Sound Level Meter Noise Logger and Tester – Max/Min/Hold Range 30-130 dBA

  • THE ENNOLOGIC DECIBEL METER provides accurate sound level (decibels or loudness) readings from 30 to 130 dB with ±1.5 dB accuracy. It is the ideal tool to discover if something at your workplace or in your neighborhood is too loud, potentially causing hearing damage. Loudness is highly subjective and difficult to determine without proper equipment. Use this Type 2 decibel meter to get convincing data for any situation..
  • AVOID OR RESOLVE DISPUTES WITH YOUR NEIGHBORS: Monitor and record noise levels in your neighborhood and outdoor traffic in your area. Check how loud your car audio is. Make sure your aftermarket exhaust is below the noise ordinance limits. Check the decibel level of leaf blowers, weed eaters, lawn mowers, and tractors. Know the actual sound level in decibels before talking to your neighbors..
  • DETERMINE IF YOUR WORKPLACE IS SAFE: Do you need to prove to your coworkers that a noise source at your workplace is too loud and causes hearing damage? Monitor sound levels on a construction site? Now you can monitor and record sound levels of machines or equipment, or perform area noise monitoring anywhere. Unlike other meters, the ennoLogic eS528L can record noise levels for hours or days for later review and to provide supporting data..
Check Stock

Protmex Sound Level Meter, Dual Mode db Meter Decibel Meter Noise Level Meter 30-130dB Measure with Fast/Slow Selection, Backlight, Max and Data Hold Function, A/C Mode PT6708(Batteries Included)

  • 【ACCURATE AND SENSITIVE SOUND METER】The Protmex SPL meter complies with International Committee IEC651 Type 2 and American National Standard ANSI S1.4 Type2. It has a 0.5s response time, can measure noise level, and quickly display accurate measurement results.Measuring Range 30~130dB.
  • +/-1.5dB Accuracy with 0.1dB Resolution. Frequency ranges from 30Hz to 8KHz..
  • 【MAX/MIN/HOLD FUNCTION DECIBEL METER】The Protmex sound level meter with a data logger can record the current maximum or minimum decibel value.
  • the decibel reader and recorder can freeze the reading on the display without worrying that the reading is too fast to record..
  • 【DIGITAL LCD DISPLAY & BACKLIGHT FUNCTION 】The Digital Sound Level Meter has a large clear LCD backlight display that can show the measurement clearly. Turn on the backlight to get the reading easily during the night and reduce the damage to the eyes..
  • 【WIDELY APPLICATION SOUND DECIBEL METER】The decibel meter can be used in many environments and is also suitable for noise engineering, product quality control, health prevention, and treatment, etc. This audio noise measurement equipment is an excellent tool to check, monitor or control and test any environmental sound level. Widely applicable to individuals, famili....
Check Stock

JBL VMA1120 Commercial/Restaurant 70v Bluetooth Mixer/Amplifier+6 Wall Speakers

  • ...ls: 5. Output Channels: 1. Tone Control: Bass and Treble non-detented potentiometers on each channel Bass: 14 dB @ 50 Hz Treble: 14 dB @ 10 kHz. Bass: 14 dB @ 50 Hz. Treble: 14 dB @ 10 kHz.
  • Input Sensitivity: Mic Input: 5.5 mVrms Line Input: 1.3 Vrms RCA Input (Stereo In): 130 mVrms. Mic Input: 5.5 mVrms. Line Input: 1.3 Vrms. RCA Input (Stereo In): 130 mVrms. Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output 4/8 Ohms Output: 20 Hz to 20 kHz, 2 dB 70 V/100 V Outputs: 80 Hz to 15 kHz 3 dB. 4/8 Ohms Output: 20 Hz to 20 kHz, 2 dB. 70 V/100 V Outputs: 80 Hz to 15 kHz 3 dB. Total Harmonic Distortion (THD): Power Amp Output:.
  • Signal to Noise Ratio: >76 dB. Input Impedance: Mic: 400 Ohms Line: 20k Ohms RCA: 50k Ohms. Mic: 400 Ohms. Line: 20k Ohms. RCA: 50k Ohms. Phantom Power: 27 VDC. Crosstalk: -70 dB. Nominal Input Voltages: Nominal AC Line Voltages: 100, 120, 220, 220 to 240 VAC, 50/60 Hz. Minimum Load Impedance: Low Impedance Output: 4 Ohms 70 V Output: 40 Ohms 100 V Output: 80 Ohms. Low Impedance Output: 4 Ohms. 70 V Output: 40 Ohms. 100 V Output: 80 Ohms. Operating Temperature: 32F to 95F. Humidity: 95% RH.
Check Stock

Handheld Sound Level Meter,LCD Decibel Meter,Mini Digital Noise Meter,Decibel Tester,Decibel Alarm,with Red Black Light Alarm and Sound Alarm,Range 30-130dBA

  • This instrument is high precision sound level meter, accuracy up to ±1.5dB,resolution: 0.1dB.Temperature measurement function and Temperature unit selection(℃/℉)..
  • Red back light alarm and sound alarm function. This digital sound level meter with stable and reliable performance.Wide measurement range from 30dB to 130dBA.There will be a alarm warning when the measurement data exceeds the standard..
  • Data hold function, maximum and minimum value measurement. LCD display with backlight, convenient to use at night..
  • Low battery indication, automatic & manual power off function. Compact and light, convenient to hold and carry..
  • Equipped with sponge ball for sensor protection. Applications includes: Environmental measurement, law enforcement, work place design, sound level analysis of machinery and engines..
Check Stock

Decibel Meter RISEPRO® Digital Sound Level Meter 30 – 130 dB Audio Noise Measure Device Backlight MAX/MIN Data Hold Auto Power Off Dual Ranges HT-80A

  • USEFUL TOOL IN YOUR WORK & LIFE – This sound level meter is a great tool for checking, monitoring or controlling the sound level of any environments. It is widely applicable for personal, families, business, studies, industrial and etc..
  • WIDE RANGES & ACCURATE MEASUREMENT – It measures range from 30 – 130 dB with frequency range from 31.5 to 4Khz. Highly accurate with +/-1.5dB..
  • TIME WEIGHTING & FREQUENCY WEIGHTING – FAST(125mS) for time weighting. TYPE A for frequency weighting..
  • HOLD , MAX & MIN, AUTO POWER OFF, BACKLIT – Including all useful features such as data hold, max recorded reading and min recorded reading as well as auto power off. Backlit feature allows use of this meter in the dark..
  • GIFT BOX PACKAGE - Black carrying pouch and premium color gift box are come with the meter..
Check Stock

VLIKE Noise Sound Level Meter, Digital Decibel Meter with LCD, Audio Measurement 30 dB to 130 dB, DB Meter with A and C Frequency Weighting for Sound Level Testing

  • The Mini Handhold Digital Sound Level Reader is compact, lightweight,easy to use,it is not only extremely wear-resisting, but also elegant.
  • Features with backlight feature,it is appropriate for gathering the sound date at night. And backlight auto power off function is provided, high-reliability and well-designed high-efficiency power supply circuit make the battery more durable.
  • This Audio DB Meter complies with IEC651 Type 2 and ANSI S1.4 Type 2,with the measuring scope from 30 to 130 dB and automatic shifting function, A and C Frequency Weighting mode selection. With Maximum(MAX) locking function and High speed(FAST)/Low speed(SLOW) response rate selection.
  • It could be called as DB reader, phonometer or SPL meter,accumulate sound level value data for noise dosimeter, can be used as a noise monitor testing sound intensity to reduce Noise pollution,avoiding the risk to hearing damage.
  • The Noise Level Meter is an instrument used to measure the ambient sound level,such as sound level around factories, workshops, schools, residential, offices, road, audio etc.It also can be appropriate for noise engineering,product quality control,health prevention and treatment,etc.
Check Stock

Protmex PT6708 Sound Level Meter Digital Sound Level Meter Reader Measurement Range 30-130 dBA Accuracy 1.5dB Noise Meter with Large LCD Screen Display Fast and Slow Selection

  • This uses to measure the sound level of sound equipment in Work and Life: such as factories, workshops, schools, residential, office areas, traffic roads, audio and other occasions. Also applies to noise engineering, product quality control, health control and so on..
  • The Protmex Noise Meter With the backlight feature, it is appropriate for gathering the sound data at night. To save power, backlight auto power off function is provided..
  • The Sound level meter utilize a electrics condenser microphone to monitor sound levels from 30 to 130 decibels at an accuracy of +/-1.5 dB with a 0.1 dB resolution. A and C weighting network selection..
  • Digital display, good anti-interference performance, power saving.
  • The Protmex sound meter weighs less than 7 ounces, and is designed to fit comfortably in the palm of your hand..
Check Stock

Decibel Meter, Tadeto Digital Sound Level Meter Portable SPL Meter 30dB to 130dB MAX Data Hold with LCD Display Backlight A/C Weighted for Home Factories

  • 【Accurate Measurement】 The measuring range of the sound level meter is 30dB to 130dB . Highly accurate with ± 2.0 dB. Real-time monitoring can give you accurate data on the sound level in the area..
  • 【A/C Weighted Measurement】 The A weighted simulates the frequency characteristics of low-intensity human ear noise, which is suitable for the detection of ambient noise. The C weighted simulates the frequency properties of high-intensity noises of the human ear, which are suitable for the sound pressure analysis of machine motors and machines. More professional measurement methods provide users with a more perfect user experience..
  • 【Fast and Slow Measurement】 The sound level meter has the function of converting the fast and slow response rate. The fast response rate uses a time constant of 0.125s/time for general environmental measurement. The slow response rate uses a 1s/time constant, which is used for environmental measurements with relatively large changes in noise levels..
  • 【Digital LCD Display 】 The digital display is a 4-digit LCD display with a resolution of 0.1 dB. Large backlit LCD digital display, the reading effect is clearer in dark places. When the battery is low, the LCD display will display a low voltage icon, indicating that ....
Check Stock

High Accuracy Data Hold Logger CD Software Decibel Sound Level Meter Monitor Indicator LCD Backlight MAX/MIN Display Audio Noise Measure 30dB~130dB Instrument Compact Professional

  • Decibel Meter with PC Interface is compact and easy to use while providing you an accurate readings in a greater range than similar inexpensive sound meters on the market..
  • Frequency weighting: A/C,High Accuracy,AC/DC function.
  • Windows Compatibility: Windows 10, 8, 7, Vista and XP (Do not run in Mac OS).
  • Sound meter can read between 30dB~130dB, and capture data to a PC using the compatible software (included in the set)..
  • Applications includes: Environmental measurement, law enforcement, work place design, sound level analysis of machinery and engines..
Check Stock