Top 4 pin Pwm Fan Controller Reviews

Endlesss PWM Fan Splitter Cable 4 Pin Black Sleeved Case Fan Splitter Cable 1 to 3 Converter Braided Y Splitter Computer PC Fan Extension Power Cable 10.5 Inches (2 Pack)

  • HIGH QUALITY: The fan PWM splitter Y-cable for PC motherboard cooling fans are constructed using high-quality material, measures 10.5 inches in length and cable is strongly braided, sleeved and wrapped to provide long-lasting performance as well as to avoid dust and breakage..
  • 2-WAY MOTHERBOARD: The PWM fan cable is designed with a 4-pin female connector on the one end and on the other end it splits into two 3-pin & one 4-pin connector.
  • the ergonomic design of the extension cord offers you a greater flexibility to position your PWM or fans inside your internal case..
  • MANY FUNCTIONS: The PWM case fan splitter provides better power supply for motherboard fans, supports PWM function, increases airflow, reduces the accumulation of heat within the frame and satisfies all your control needs to increase the lifespan of the motherboard..
  • For 3-PIN & 4-PIN FAN: The 2-way PC PWM fan splitter power cable is mostly compatible with many brands of 3-pin and 4-pin PC case motherboard cooling fans.
  • this PWM fan splitter hub connects 3 computer case fans to a single motherboard fan header..
  • CPU FAN EXTENSION: The pc fan extension cable 3-pin & 4-pin compatible is designed for enthusiasts with need for controlling numerous system fans..
Check Stock

FBHDZVV 4 Pin PWM Fan Splitter Cable, Black Sleeved Case Fan Braided Adapter Cable 1 to 3 Converter Y Splitter for Computer PC CPU Cooling Fan ATX Case 4-Pin/3-Pin Extension Power Cable 10 Inches

  • The pwm fan splitter cable is designed with a 4-pin female connector on the one end and on the other end it splits into two 3-pin male & one 4-pin male connector, 1-to-3 splitter fan power supply extension cables, male to female connector plug..
  • The black sleeved case fan braided adapter cable is mostly compatible with many brands of 3-pin and 4-pin PC case motherboard cooling fans, this PWM fan splitter hub connects 3 computer case fans to a single motherboard fan header..
  • Easily realize 4 pin PWM temperature control fan parallel connection, make full use of the limited number of motherboard 4 pin interface, can be extended to connect three 4 pin /3 pin fans, the fan splitter cable provide additional fan to increase airflow in your computer case..
  • 4-pin PWM 1 to 3 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case. support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans..
  • Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans, the ergonomic design of the extension cord offers you a greater flexibility to position your PWM or fans inside your internal case..
Check Stock

Cable Matters 2-Pack 2 Way 4 Pin PWM Fan Splitter Cable - 4 Inches

  • PC fan splitter Y cable connects 2 computer case fans to a single motherboard fan header.
  • 1 to 2 case fan splitter connects an additional fan to increase airflow in your computer case.
  • Mobo 4 pin fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using software from a motherboard equipped with PWM control.
  • Master / slave PWM splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
  • The computer fan splitter omits the RPM signal pin for tandem fan speeds with both fans.
  • Double CPU fan splitter adds 4 fans with the Cost-effective 2-pack of fan header splitter.
  • Sleeved and wrapped black 4-inch PWM Y cable provides a tidy look in an open computer case.
  • 3-pin & 4-pin fan compatible with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler Master Blade Master 80 / Master 92, Cooler Master Hyper 212 EVO 120mm, Cooler Master JetFlo 120mm, Cooler Master SickleFlow 120mm, Cooler Master MegaFlow 200mm, Noctua NF-F12, Thermaltake WATER 3.0 Dual 240.
Check Stock

Airgoo PWM ARGB Fan Hub, 8 Fan Ports with pwm Temperature Control sync with Motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Powered

  • 【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Check Stock

Noctua NA-FC1 4-Pin PWM Fan Controller Black

  • Compact, highly flexible controller for 4-pin PWM fans.
  • Works as a manual speed reducer or in tandem with the automatic motherboard fan control: achieve truly quiet operation, even with high-speed PWM fans....
  • “No stop” mode: prevents the fan from falling below a speed of 300rpm in order to avoid BIOS fan errors.
  • Includes a 3-way splitter cable for controlling up to 3 fans simultaneously.
Check Stock

PWM Fan Splitter Extension Cable - 1 to 5 Computer Fan Splitter Cable Compatible with 3 & 4 Pin PC Cooling Fans, 13 inch Black Braided Nylon Cable

  • Manages Multiple Fans - Our PWM fan cable expands one motherboard PWM fan header to support up to five internal cooling fans at the same time to reduce the load on the motherboard.
  • Easy Installation - Simply plug the PWM case fan splitter into the motherboard and attach the other end to the chassis with the double-sided adhesive.
  • Flexible Use - The PWM 5 way PC fan splitter can be used as a 4 pin fan splitter for most motherboard cooling fans. Our pc fan extension cable offers greater flexibility between motherboard and CPU cooling fans.
  • Designed for Performance - The connector types of the PWM fan extension cable includes 1 TX4 4-pin Female, 1 TX4 4-pin Male for CPU fan (including Detect tach pin), and 4 TX4 4-pin Male for case fan.
  • Money-back Guarantee - Backed by our manufacturer’s warranty, if your fan splitter extension cable falls short of your expectations for any reason, contact us for a full refund.
Check Stock

Airgoo PWM ARGB Fan Hub, 2022 New Upgrade 8 Fan Ports with pwm control sync with motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Power

  • 【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Check Stock

3 Pack PWM Fan Splitter Cable 1 to 3 (4 Pin+3 Pin)

  • PC fan splitter cable：these 27 cm extension cables allow you more choice in where you want to position your PWM or fans inside your case, good for your daily use.
  • This Y-type splitter cables is convenient for running three fans on one fan header.
  • 4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header ；Every Pack Compatible With 1 pcs 4 Pin + 2 pcs 3 Pin PMW Fan Connector.
  • CPU fan splitter cable Product function:provide two additional fan to increase airflow in your computer case, reduce the accumulation of heat within the chassis.
  • The 4-pin connector supports 3-pin and 4-pin fans.
  • Temperature control: the pwn fan splitter cable provide additional fans to increase airflow in the computer case, reduce the temperature and ensure the operational speed of CPU.
  • Supports 3 PWM fans from a single motherboard PWM header.
  • Compatible with 4pin PMW fan connector and 3pin fan connector.
Check Stock

FBHDZVV 4Pin PMW Fan Splitter Cable to 3Pin/4Pin PC Case Fan Sleeved Adapter Cable 1 to 3 PMW Fan Splitter Extension Power Cable Splitter Y Power Adapter Cable PC Computer Cooling Fan Wire Connector

  • The PWM molex fan extension cable for PC motherboard cooling fans are constructed using high-quality material, 10.5 inches cable is strongly braided, sleeved and wrapped to provide long-lasting performance as well as to avoid dust..
  • The PC case fan sleeved adapter cable is designed with a 4-pin (Actual 2-Pin) mol-ex connector on the one end and on the other end it splits into 3 X 3/4-pin connector, the ergonomic design of the extension cord offers you a greater flexibility to position your PWM or fans inside your internal case..
  • The molex fan connector types of PWM fan extension cable includes one 4-pin(Actual 2-Pin) molx connector and 3/4-pin male plug connector. Please note this 4-Pin Molex is actual 2-Pin but it still works fine on your computer..
  • Motherboard 4-pin interface, PWM speed control, can be used for multiple cooling fans, expand and expand motherboard 4-pin interface suitable for CPU or computer chassis fan..
  • Molex fan splitter easy to plug, the fan extension cable offers greater flexibility between motherboard and CPU cooling fans.Easily realize the parallel connection of 4-pin PWM temperature-controlled fans, so that the fans can achieve a quieter effect and better heat dissipation..
Check Stock

LoveRPi Compact PoE HAT with PWM Fan Controller for Raspberry Pi 4

  • GROUND LOOPS WARNING: Do not use this device with grounded USB peripherals, HDMI displays, and attachments. Please use the professional PoE model with isolation transformer to prevent electrical loops. In non-controlled PoE applications, ALWAYS use the professional PoE model..
  • INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
  • VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 4 Model B ensures performance and stable operation..
  • EASY INSTALLATION AND BACKWARDS COMPATIBLE: Please remove all non-essential heatsinks including RAM/USB/Ethernet heatsink before seating the HAT! Supports the latest Raspberry Pi 4 as well as the Raspberry Pi 3 Model B+. Align HAT with GPIO and PoE pins and push down. Make sure to fully seat the HAT by checking and removing any obstructions..
Check Stock

Winncon PWM Fan Splitter Cable 1 to 2 Converter, Black Case Fan Splitter Cable, Case Fan Power Duplicator Converter, Dual Case Fan Power Adapter, 10.6 inch (1 Pack)

  • ❤One Divinded into Two: one 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
  • and one 3 pin fan connector omits the RPM signal pin for tandem fan speeds with both fans.
  • ❤Keep Same Speed: 4-Pin receptacle connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using software from a motherboard equipped with PWM control.The fan adapter is compatible with 3-pin and 4-pin PC fans..
  • ❤Increase Airflow: This PWM fan splitter cable connects 2 computer case fans to a single motherboard fan header to increase airflow in your computer case, adding ventilation and regulating the fan speed in a computer case ..
  • ❤High quality: The cooling fan cable is covered with fine plastic for long-term years’ use. High quality high density black sleeved able, 24AWG, and the length is about 10.6 inch (27cm)..
  • ❤This Dual Case Fan Power Adapter is compatible with popular brands of computer case cooling fans, and can be used for a motherboard 4pin interface powering for multiple cooling fans and PWM speed control, lengthen and extend the motherboard 4-pin interface..
Check Stock

EK-CoolStream Classic PE 360 Combo Pack with Free Tape Measure Tool

  • Combo kit comes with: 1 Radiator, 3 RGB fans, 1 fan splitter, 1 radiator gasket AND a FREE Tape Measure Tool!!.
  • EK-Vardar RGB fans is its simplicity as it uses standard 4-pin 12V RGB connectivity.
  • Dimensions: 393 x 120 x 45mm (L x W x H).
  • EK-Cable Y-Splitter 3-Fan PWM is a simple adapter used to hook two DC or PWM fans to one motherboard 4-pin PWM or 3-pin DC FAN connector..
  • Connect three (PWM) fans from one (PWM) fan header.
Check Stock

2PCS 4-Pin PWM Fan Splitter Cable, FBHDZVV Sleeved Braided Adapter Computer PC Fan Extension Power Supply Cable Converter Cord Wire Compatible with Computer ATX Case 4-Pin/3-Pin Cooling Fan Cable

  • High quality PWM fan extension cable, offers greater flexibility to position Motherboard and CPU Fans for optimal cooling, for extending fan cables in your case..
  • 4 pin PWM fan power supply extension cable for PC computer motherboard fans, make you easier diy CPU or PC computer case..
  • The pwm cable extension cord is sleeved in flexible and sturdy braided black nylon to provide long-lasting performance as well as to avoid dust and breakage..
  • Widely Compatible with : The cable is one 4-pin female connector to 4-pin male connector, each extension cable supports PWM function and speed regulation with a 4-pin female and 4-pin male port, which can also be used for 3-pin cpu fans..
  • Easy to plug, the fan extension cable gives you greater flexibility between your motherboard and CPU cooling fan by lengthening the pwm fan cable, perfect for larger enclosures..
Check Stock