Top 4 Output Relay Reviews

Opto 22 DC60MP MP Model DC Control Solid State Relay, 60 VDC, 3 Amps, 4000 VRMS Isolation Voltage

  • Special attention: the current of this product is 10A for a long time.A large heat sink or fan need to be added.Model: SSR-40DA Solid State Relay 40A DC to AC.
  • Input voltage: 3-32V DC Output voltage: 24-380V AC.
  • Item size: 6.2 x 4.5 x 2.3cm/ 2.4 x 1.8 x 0.9inch(L*W*H).
Check Stock

12 Volt Timer Relay, DROK 0.1s to 999min 50mA 4-Mode On-Off Automotive Digital Delay Relay, Electric Delay Timer Switch, Cycle Time Delay Module with LED Display

  • 4 MODE TIME DELAY RELAY: DROK 12V relay is provided with 4 different settings and supports various triggering signal source, like positive side of power supply triggering, Button, PNP sensor, PLC signal, which is available for most of applications..
  • WIDE ADJUSTABLE TIMING RANGE: This off delay relay supports widest timing range, 0.1 seconds to 999 minutes adjustable, which can fulfilled your various need..
  • STRONG ANTI-INTERFERENCE ABILITY: The output of digital timer relay adopts optocoupler isolation, which enhances the capacity of resisting disturbance power consumption..
  • SUPER SIMPLE OPERATION: Our relay board is operated by buttons and the delay module is equipped with LED digital display which is convenient for you to check the set value..
  • AUTOMATIC SAVING FUNCTION: After you finish the setting, you can cut off the power and then the parameters will be saved automatically, handy and convenient..
Check Stock

10 Pack 30/40 AMP Waterproof 5-Pin 12V Relay Switch （SPDT）for 12 Volt Automotive Marine Relays for Boats Auto Fan Cars

  • 12V waterproof 5-Pin SPDT Relay Excellent waterproof and dustproof ability, high quality in any weather conditions.
  • 12V 5-Pin SPDT Relay Pin Specifications: Ground (85), VDC (30), Trigger (86), Output N/C (87a), and Output N/O (87)..
  • SPDT Relay with 40A/30A High Switching Capability,it has both normally open and normally closed terminals, terminal 87A is powered when the relay is inactive and switches the power to terminal 87 when the relay is activated..
  • 12v relays can operate with anywhere between 9v and 14v,Very suitable for 12V automotive, marine, and machine circuits..
  • These 12V 5-pin relays are rated to handle 30A on normally closed pin 87a and 40A on normally open pin 87..
Check Stock

CNAODUN PID Temperature Controller Kit 100-240 VAC Voltage with 40DA Solid State Relay，K Type Thermocouple Probe and Heat Sink

  • ♥【One Way SSR output】3,4 port output to SSR,a 40da solid state relay is included in the package.The power supply voltage for this Pid temperature controller is 100-240VAC..
  • ♥【One Alarm Output】6,7 ports are alarm outputs, AC220V/DC30V 3A (Resistive load) ON/NC, also can be used to connect relay..
  • ♥【Supports 2 Wire Sensor Input】Support two-wire thermocouple input, K, E, J, N, W3-25, W5-26 type thermocouple input are available, the default setting is K type thermocouple input.
  • ♥【℉ and ℃ Adjustable】Fahrenheit and Celsius adjustable, default is Fahrenheit, with PID function.
  • ♥【Temperature Digital Display】PV is the current measured temperature, SV is the set temperature, both are displayed simultaneously..
Check Stock

TWTADE 2PCS SSR-25 DA 25A 3-32V DC / 24-380V AC SSR Single Phase Solid State Relay ssr-25da

  • Special attention: The current of this product is 10A for a long time.A large heat sink or fan need to be added.Model: SSR-25DA Solid State Relay 25A DC to AC.
  • Input voltage: 3-32V DC Output voltage: 24-380V AC.
  • Item size: 6.2 x 4.5 x 2.3cm/ 2.4 x 1.8 x 0.9inch(L*W*H).
Check Stock

Solid State Relay, 90 to 280VAC, 25A

  • Solid state relay module, long service life and high reliability, low drive voltage and current, widely used in many automatic control systems..
  • Model: XRE-1D4840 Solid State Relay 40A DC to AC..
  • Input voltage: 3-32V DC Output voltage: 24-480V AC.
  • Note: The current of this product is 40A for a long time. A large heat sink or fan need to be added..
  • Package Content: 2 x 40A Solid State Relay, ideal for automatic process control application, a must component for temperature controller and other machinery control system..
Check Stock

Relay 12V DC 5-PIN Waterproof with Harness 40/30 AMP & Inline Fuse Holder - Heavy Duty 12 AWG Tinned Copper Wires 6

  • 12 in 1 SET: Include 6x 12v 40/30a Automobile Relay, 6x 12Volt Inline Fuse Holder..
  • Wire Specifications: Yellow - Ground (85), Black- VDC (30), White- Trigger (86), Blue- Output N/C (87a), and Red- Output N/O (87).
  • Easy Wiring - The waterproof relay sockets come with color-labeled wires for loads/accessories convenient wiring..
  • High quality materials: The 5 pin relay made of High quality nylon flame retardancy shell, silver contact, pure copper coil.
  • Wide Application - The 12 volt Relay Wide range of use, greatly used for car lights, fog lamps, wiper, starter, fans, speakers, traction control....
Check Stock

Inkbird PID Temperature Controller Kit High Voltage 100ACV to 240ACV Comes with SSR 40DA Solid State Relay K Type Thermocouple and White Heat Sink

  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer..
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller.
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included.
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading.
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time.
Check Stock

TWTADE 2PCS SSR-40 DA 40A DC 3-32V to AC 24-380V SSR Single Phase Solid State Relay ssr-40da

  • Special attention: the current of this product is 10A for a long time.A large heat sink or fan need to be added.Model: SSR-40DA Solid State Relay 40A DC to AC.
  • Input voltage: 3-32V DC Output voltage: 24-380V AC.
  • Item size: 6.2 x 4.5 x 2.3cm/ 2.4 x 1.8 x 0.9inch(L*W*H).
Check Stock

Inkbird SSR Solid State Relay SSR 40DA for PID Thermostat Temperature Controller

  • Model No.: SSR-80DA；If you want to reach 80A, you need to add a large heat sink and fan.
  • output Voltage : 24-480vac；Special attention:This relay cannot be used for more than 30A for a long time.If that actual use current exceeds 15A，It is necessary to separately configure the heat sink..
  • Total size (approximate) : 58 x 45 x 32Mm/2.3" x 1.8" x 1.26" (l*w*t).
  • material : metal, plastic, electronic parts.
Check Stock

Adafruit 1918 Analog UV Light Sensor Breakout - GUVA-S12SD

  • photosensitive resistance module's most sensitive to ambient light, commonly used to detect environment around the brightness of the light, or MCU trigger relay module, etc..
  • module in the environment light intensity than set threshold, output high level DO end, when the environment light intensity more than set threshold, the DO output low level.
  • the DO output can be directly connected to microcontroller, through single chip microcomputer to detect the high and low level, thus to detect the environment light intensity change.
  • the DO output can be directly driven our relay module, which can form a light-operated switch..
Check Stock

DPST 1NO 1NC 8Amp Power Relay Module, Briidea 24V AC/DC Power Relay Control Voltage, White

  • INPUT CONTROL SIGNAL: Voltage AC or DC 24V, Current 17mA..
  • OUTPUT CURRENT: Output switch DPST 1NO 1NC(Double Pole Single Throw, 1 Normally Open and 1 Normally Close ), rated current 8A/250VAC or 8A/30VDC (one switch)..
  • SIMPLE & PRACTICAL: This passive power relay module is simple and practical, which is very convenient to use. It can support both Normally Open and Normally Close..
  • EASY MOUNT: The power relay is of compact plastic case and wires connects for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw..
  • LED INDICATION: This power relay has a led indicator for relay action indication. It is obvious to know the status of the switch at a glance..
Check Stock

MICTUNING 12V Fuse Relay Switch Harness Set - 30A ATO ATC Blade Fuse, 5 Pin SPST Automotive Electrical Relays with Heavy Duty 14 AWG Wires - 6 Pack

  • Upgraded Version - Automotive relays built in fuse socket with included 30A blade fuse, no need of a separate fuse holder, saving space and money. Heavy duty 14AWG wires for main contact.
  • Easy Wiring - The relay sockets come with color-labeled wires for loads/accessories convenient wiring. Black - Ground (85), Red - VDC (30), White - Trigger (86), Blue - Output N/O (87),Green-87a Output Closed Contact.
  • Neat Mounting Design - The interlocking design of unique male-female slot on each socket edge, easy to connect all relays together, offering clean and neat installationNeat Mounting Design - The interlocking design of unique male-female slot on each socket edge, easy to connect all relays together, offering clean and neat installation.
  • Good Construction - 12V DC (Max@14V DC) and 30A High Switching Capability. Bosch style 4-Pin SPST (Single Pole Single Throw) Relay. Metal mounting bracket on the electrical relay promotes easy installation.
  • Wide Application - Wide range of use, greatly used for car lights, fog lamps, wiper, starter, fans, speakers, traction control systems, etc.
Check Stock