Top 4 Inch Tip Reviews

Snap-On 7 Piece Combination Screwdriver Set, 4-Flats and 3 Phillips, Part #SDDX70AR

  • These screwdrivers are a general-purpose selection of the most frequently used screwdriver tips and sizes.
  • Screwdriver Set with 8 Cushion-Grip Screwdrivers, 1/4-Inch (6.4 mm) , 5/16-Inch (7.9 mm) Keystone, 5/16-Inch (7.9 mm) and 3/16-Inch (4.8 mm) Cabinet Tip, #1, #2, #3 Phillips, #2 Phillips Stubby.
  • Tip-Ident quickly identifies the screwdriver type and tip orientation.
  • Premium chrome-plated for smooth feel and corrosion resistance and precision-machined tip for exact fit.
Check Stock

Klein Tools 33734INS 1000V Slim Tip Insulated Screwdriver Set, Phillips, Cabinet, Square Slim-Tip, Cushion Grip Handle, 4-Piece

  • Slim-Tip Insulated Screwdriver Set includes: 4-Inch round shank in a #2 Phillips and 1/4-Inch Cabinet tips.
  • 6-Inch round shank in a #2 Square and 3/16-Inch Cabinet tips.
  • 1000-Volt rated insulated screwdrivers with slim-tips that allow for greater access into tight spaces.
  • Insulated blade is flush with the tip to help reduce nicking the insulation.
  • Layer of orange impact and flame-resistant insulation protects from energized sources.
  • Cushion-grip handles for greater torque and comfort.
  • Tip-Ident quickly identifies the type of screwdriver tip orientation so you can easily engage the screwdriver tip with the screw.
Check Stock

JWGJW 120025 Spray Guide Accessory Tool for All Airless Paint Sprayer 7/8" w/ 517 Tip with 10 Inch Extension Pole

  • Material: the reversible spray tip is consisted of 304 stainless steel handle and tungsten carbide orifice. The tip seal is made of stainless steel tip gasket and nylon, leakproof and wearproof, odorless and non-toxic, easy to clean, sturdy and durable to use for a long time..
  • Package includes: You will get 4 reversible airless sprayer tips in 4 sizes, each of which comes with an airless spray tip and a tip seal. These 4 models are 215, 315, 417, 523 respectively, sufficient for your use and replacement in daily life..
  • Compatibility: The airless sprayer tips are perfectly compatible with most airless paint sprayers, models: 215, 315, 417, 523, the corresponding diameter of nozzles are 0.015 inch, 0.017 inch, 0.017 inch, 0.023 inch, and the spray range is 4-12 inches/ 10-30 cm..
  • Easy to Use: The Paint Sprayer Nozzle tips are easy to install on spray guns without tools, fast and easy to clean, simply rotate the nozzle to wash..
  • Widely Use: The switch tips compatible with most major airless spray guns, can be applied for home decoration, painting and industrial fine painting and decoration, etc.They make the preparation of the surface, painting and other coatings and cleaning after painting more easier..
Check Stock

4 Pieces Reversible Spray Tips Reversible Airless Paint Sprayer Nozzle Tips Airless Paint Spray Guns Airless Sprayer Spraying Machine Parts for Homes Buildings Decks or Fences (215, 315, 417, 523)

  • ...ess sprayer tips in 4 sizes, each of which comes with an airless spray tip and a tip seal.
  • These 4 models are 215, 315, 417, 523 respectively, sufficient for your use and replacement in daily life.
  • Wide compatibility: there are 4 models, namely 215, 315, 417, 523, the corresponding diameter of nozzles are 0.015 inch, 0.017 inch, 0.017 inch, 0.023 inch, and the spray range is 4-12 inches/ 10-30 cm.
  • The airless sprayer tips are compatible with most airless sprayers.
  • The spray range will vary from the size of the aperture.
  • Quality material: the reversible airless spray tip is consisted of 304 stainless steel handle and tungsten carbide orifice.
  • The tip seal is made of stainless steel tip gasket and nylon, leakproof and wearproof, odorless and non-toxic, easy to clean, sturdy and durable to use for a long time.
  • Easy to install: the airless sprayer nozzles are easy to install without extra tools.
  • First insert the tip seal into the guard base, and then put the spray tips into the guard base, finally rotate to fix it.
  • The cleaning is simple and fast, and you just need to rotate the nozzle and wash.
  • Wide application: the switch spray tips work well with most major airless spray guns, suitable for painting, furniture, fences, home decor and industrial fine p....
Check Stock

Klein Tools 85078 Screwdriver Set, All-Purpose Screwdriver Kit has 4 Phillips and 4 Flat Head Tips, Non-Slip Cushion Grip, 8-Piece

  • These screwdrivers are a general-purpose selection of the most frequently used screwdriver tips and sizes.
  • Screwdriver Set includes 8 Cushion Grip Screwdrivers, 1/4-Inch (6.4 mm) , 5/16-Inch (7.9 mm) Keystone, 5/16-Inch (7.9 mm) and 3/16-Inch (4.8 mm) Cabinet Tip, #1 Phillips, #2 Phillips Stubby, #2 Phillips, #3 Phillips.
  • Tip-Ident quickly identifies the screwdriver type and tip orientation.
  • Premium chrome-plated for smooth feel and corrosion resistance and precision-machined tip for exact fit.
  • Cushion-Grip handles for greater torque and comfort.
  • Internal flanges inside handle provide solid, twist-resistant blade anchor.
Check Stock

Klein Tools 85074 Screwdriver Set 6-Piece Includes 3 All-Purpose Flathead, 3 Phillips, Cushion Grip Comfort, Precision Machined Screwdrivers

  • These screwdrivers are a general-purpose selection of the most frequently used screwdriver tips and sizes.
  • Screwdriver Set includes 3/16-Inch cabinet tip (Cat. No. 601-3), 1/4-Inch and 5/16-Inch keystone tip (Cat. Nos. 600-4 and 600-6), and #1, #2 and #3 Phillips tip (Cat. Nos. 603-3, 603-4 and 603-6) screwdrivers.
  • Cushion-Grip handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance.
  • Internal flanges inside handle provide solid, twist-resistant blade anchor.
Check Stock

Graco Inc. Graco 221211 Reversible Airless Spray Tip, RAC IV, 211,

  • 4-6 inch spray pattern ideal for narrower surfaces such as deck railings, interior trim or outdoor furniture.
  • .011 inch tip size (orifice) optimal for spraying thinner materials like semi transparent stains, water sealers, stains or polyurethanes.
  • Reverse-A-Clean feature quickly clears tip clogs by simply twisting the tip and spraying in the reverse position.
  • Easily installs on spray guns without tools.
  • Consult your sprayer manual to determine the maximum tips size your sprayer can support.
Check Stock

Felo 07157 18071 PH3 X 6\ Phillips Screwdriver Series 330 PH3

  • Precision-machined tip provides accurate fit and torque without slippage.
  • Cushion-Grip handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance.
  • Tip-Ident quickly identifies the screwdriver type and tip orientation.
  • Internal flanges inside handle provide solid, twist-resistant blade anchor.
  • Overall length: 6-3/4-Inch, shank length: 3-Inch.
  • Tip is precision-machined to provide a more consistent geometric symmetry than conventional Phillips-tip screwdrivers.
  • Provides accurate fit and torque without slippage.
  • Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product.
Check Stock

XOOL Magnetic Screwdriver Set 10PCS, 5 Phillips and 5 Flat Head Tips Professional Cushion Grip Screwdriver Non-Slip for Repair Home Improvement Craft

  • Screwdriver Set is a general purpose selection of the most frequently used screwdrivers.
  • Includes a 3/16-Inch Cabinet tip, 1/4-Inch and 5/16-Inch Keystone tips (Cat. Nos. 601-3, 600-4 and 600-6), #1, #2, #3 Phillips tips (Cat. Nos. 603-3, 603-4. and 603-6), and a Magnetizer/Demagnetizer.
  • Tip-Ident quickly identifies the screwdriver type and tip orientation.
  • Premium chrome-plating for smooth feel and corrosion resistance.
Check Stock

2Pcs Screwdriver Set, Chrome-vanadium Steel, Magnetic Screwdriver with Non-Slip Rubber Handle for Furniture/Car/Computer/Equipment Repair (Black&Orange)

  • Screwdriver Set is a general purpose selection of the most frequently used screwdrivers.
  • Includes a 3/16-Inch Cabinet tip, 1/4-Inch and 5/16-Inch Keystone tips (Cat. Nos. 601-3, 600-4 and 600-6), #1, #2, #3 Phillips tips (Cat. Nos. 603-3, 603-4. and 603-6), and a Magnetizer/Demagnetizer.
  • Tip-Ident quickly identifies the screwdriver type and tip orientation.
  • Premium chrome-plating for smooth feel and corrosion resistance.
Check Stock

Klein Tools 80141 Hand Tools Kit includes Pliers, Screwdrivers, Nut Drivers, Backpack, and More Jobsite Tools, 41-Piece

  • 41-PIECE TOOL KIT for the professiol with 39 Pocket Tool Backpack, canvas zipper back and clear standard safety glasses.
  • PLIERS: 10-Inch Pump Pliers, 9-Inch New England Lineman's, 8-Inch Diagol Cutting, and 8-Inch Long Nose.
  • SCREWDRIVERS: 3/16-Inch (3- and 6-Inch Shank), 1/4-Inch Cabinet Tip, 1/4- and 5/16-Inch Keystone Tip, No. 1 and No. 2 Phillips, No. 2 Square, 6-in-1 Stubby, 14-in-1 Precision, No. 2 Square Conduit Reamer, Scratch Awl.
  • NUT DRIVERS: 3/16, 1/4, 5/16, 11/32, 3/8, 7/16, and 1/2-Inch with Hollow Shaft.
  • STRIPPING AND CUTTING TOOLS: High-Leverage Cable Cutter, Crimping/Cutting Tool – 10-22 AWG Non-Insulated and Insulated Connectors, Klein-Kurve Wire Stripper/Cutter – 10-18 AWG Solid & 12-20 AWG Stranded and Klein-Kurve Dual NM Cable Stripper/Cutter.
Check Stock

Milwaukee 48-22-2706 6Piece Phillips and Slotted Head Screwdriv Ing Set W/Magnetic Tips and Trilobe Handles

  • INCLUDES: 3 x Phillips Head (#1 – 3 Inch, #2 – 4 Inch, #3 – 6 Inch) 3 x Slotted Head (1/4 Inch x 4 Inch, 3/16 Inch x 6 Inch, 5/16 Inch x 6 Inch.
  • ERGONOMIC: Each handle is outfitted with a comfortable, form-fitting design and a lanyard hole for easy storage.
  • MAGNETIC TIP: Each screwdriver has a magnetic tip to help out with holding on to fasteners for maximum control in any job situation.
  • WRENCH-READY HEX SHANK: If you need extra torque for a particularly tough fastener, you can easily apply it with a wrench with the help of these screwdrivers’ uniquely-designed shanks.
  • ID MARKINGS: When in storage, you can easily identify each of these screwdrivers with the help of the simple, bold markings found on their handles and endcaps.
Check Stock

LCGP 4" to 5" Diesel Exhaust Tip, 12" Overall Length Bolt On Design Truck Tail Tip, Black Powder Coated,Rolled Angle Cut Design

  • 4" Diesel Exhaust tip, 5 inch Outlet 12 inch Overall Length Universal Tail Tip..
  • Surface Finished: Black Powder Coated. Style: Angled Cut - Rolled Edge.
  • Have a small hole on bottom of tip to drain water..
  • Easy Slip On 4" Tailpipe. However, Welding Is Recommend..
  • High quality stainless steel infused with anti-corrosive agents that prevent your exhaust tip from rusting..
Check Stock