Top 3r12 4 5v Dry Battery Reviews

AEDIKO 10pcs 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 18650 Lithium Battery Charging Boost Mobile Power Protection PCB Board

2A 5V Lithium Battery Charging Protection Module:Output Voltage: 5V.
Charging Voltage: DC 4.5V-5.5V (DC 5V Recommended).
MCU Users: if You Accept a Small Load KEY Can be Connected to the Microcontroller about 20s to Provide a Low Level Allows the Module to Continue Working. Trigger Mode: Low Level Trigger (Ground).
Protection Functions: 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module.Lithium Battery Protection Function:Over-Current Protection,Over-Voltage Protection, Over-Temperature Protection, Short Circuit Protection.
NOTE:The First Time the Load is Connected, Output is Automatically Turned On. If the Load is Less than 50MA, the Output will be Automatically Turned Off after 30s.
if the Load is Greater than 50MA, the Output Will be Automatically Turned On.
Application:2A 5V Module Widely Used for Mobile Power, Car Charging Retrofit,Driving Recorder Power Supply and Portable Devices Such As Mobile Phones and Tablets.

Check Stock

SunFounder Raspberry Pi UPS Power Supply Module V2.0 Supports Pass Through Charging, 5V/3A Lithium Battery Power Pack Expansion Board Compatible with Raspberry Pi 4, 3 and All Model B/B+

➢Raspberry Pi UPS - A Power Supply Module designed for Raspberry Pi UPS compatible with Raspberry Pi 4, 3 and all Model B/B+ series. Also suitable for other boards powered by USB (5V/3A) such as Banana Pi/ODROID-C4..
➢Pass Through Charging - Requires two 18650 Batteries (not included), with Pass through Charging function, it can power to the Raspberry Pi while charging ..
➢Over Charge/Discharge Protection - Charging ends when the total battery voltage reaches 8.4V. When the single battery voltage is below 3.2V, the battery protection activates and the battery is no longer discharged..
➢Balance Charging & Over Heating Protection - The battery charging current will be reduced or even discharged if the voltage of a single battery exceeds 4.2V. If the temperature reaches 75 degrees Celsius, the DC-DC will shut down to prevent overheating damage..
➢UPS Output: 5V/3A, UPS Input: 5V/2A, Dimension: 90mm x 56mm x 24mm.

Check Stock

Huilier Mini Small Fan Cooling Portable Desktop Dual Bladeless Air Conditioner USB New

❤Electrical plug:USB 5V and power shifter(The current of USB interface of general mobile should be lower than 500MA).
❤Battery: 1.5V, 3 * AA batteries.(Package not include the battery).
❤How to use: Use the 3 * AA Battery Or the USB..
❤Outer size:115mm x 110mm x 135mm/4.49” x 4.29” x 5.27”(approx).

Check Stock

Crank 2.0 (Radio Edit)

...Adapter Compatible with ETON FR-300 FR300 FR-250 FR-350 FR-400 FR-405 American Red Cross ARC Emergency Radio AM/FM/SW 1-7 FR200 FR200G Emergency Crank Radio ARCFR300W DC4.5V - DC5V 100mA 200mA 4.5VDC - 5VDC 0.1A 0.2A - 1A 4.5V - 5.0V 4.5 V - 5 V 4.5 VDC - 5 VDC Switching Class 2 Power Supply Cord Cable PS Wall Home Battery Charger Mains PSU (✅ with a middle negative pin. with ✅ DO: 3.5mm small barrel tip. ❌NOT OD: 5.5mm big barrel tip.).
Compatible with: Eton FR300 FR-300 Multi Purpose Radio Re-Inventing Radio LL Bean AM/FM/TV1/TV2/Weather Receiver.
ETON Adapter Part Number GPU3504 4.5 volts with the center pin negative with a maximum current of 100 milliamps (0.1 amps).
ETON Model: SY-05014 SY05014 4.5VDC 100mA Class 2 Power Supply.
Compatible with: Eton Grundig ETON FR200 FR200G FR-200 G FR-200G FR-250 FR-300 FR-350 FR-400 American Red Cross EMERGENCY RADIO Traveler II Digital G8 Radio G8-ACA-US.
ETON FR250 FR300 FR350 FR400 FR405 American Red Cross EMERGENCY RADIO AM/FM/SW 1-7 World Receiver FR300 Emergency Crank Radio ARCFR300W.
Eton FR-405 FR405 American Red Cross Emergency Radio Receiver.
(❌!!! Note: This item is NOT for: Eton / GRUNDIG FR360 FR500 FR600 FD35UD-6-300 FR500-ACA-US. ❌!!! NOT for Red Cross lantern. Please Check For Compatib....

Check Stock

Mini Small Fan Cooling Portable Desktop Dual Bladeless Air Conditioner USB NEW

Electrical plug:USB 5V and power shifter(The current of USB interface of general mobile should be lower than 500MA).
Parameter：5V / 500MA Power:2.5W Battery: 1.5V, 3 * AA batteries.(Package not include the battery).
How to use: Use the 3 * AA Battery Or the USB. Material: ABS Outer size:115mm x 110mm x 135mm/4.49” x 4.29” x 5.27”(approx).
5 Colors for choose:Green/Hot pink/Blue/Purple/Orange Quantity: 1 pc Note:CHOCKING HAZARD – small Parts. Not for children under 3 years..

Check Stock

Mini UPS Battery Backup 37Wh Uninterruptible Power Supply for Router, Modem, Security Camera with Input 5V DC Output 5V DC Max.3A Support Micro USB

Mini uninterruptible power supply for power outage, compatible with router, modem, security camera, DSL, and other 5V DC and Micro USB devices, and can still use WiFi in case of power outage..
Compact 5V DC backup battery, built-in 10000mAh 37Wh Li-polymer battery, offers a long backup time for the loading device..
Input: DC 5V or Micro USB 5V Max.3A, Output: DC 5V or Micro USB 5V Max.3A, support 0.5A, 1A, 1.5A, 2A, 2.5A and any current below 3A. No charger included, please use the original charger of the loading device..
Including 1×DC cable 5.5×2.5mm, 3×DC jacks 5.5×2.1mm, 4.0×1.7mm, 3.5×1.35mm and 1×Micro USB jacks..
Multiple smart protections: short circuit protection, voltage fluctuation protection, overcharge protection, over discharge protection, temperature protection, safe to use..

Check Stock

DC Converter with Battery Clip 12V 24V to 5V 8A USB Power Adapter Buck Regulator Charger 4 Ports Automatically Identify shunt Charging Suitable for iPhone Android Samsung Galaxy S10 s9 Plus

Input voltage: DC 8-35V, (12V/24V lead-acid battery or lithium-ion battery can be changed to 5V).
4 USB charging ports can charge 4 devices at the same time. With integrated switch ultra-thin regulator module, the conversion rate is as high as 96%..
With reverse polarity、over current、over temperature、short circuit、low voltage、over charge protection to provide better protection for your device..
Battery + converter = super power bank, perfect for home and outdoor travelers, can replenish the power of cell phones and other 5V electronic devices.

Check Stock

Audewdirect Car Jump Starter Portable Auto Battery Booster 1000A Peak Up to 6.0L Gas or 4.5L Diesel Engine 12V Car Jumper Power Bank Power Pack with Dual USB Ports and Flashlight Epower-146b

?Compact and Powerful?With 10800mAh battery,1000A jump starter can start 12v vehicles(up to 6.0L petrol or 4.5L....
?Safety Technology?UL2743 Certified. Works properly at -4 degree F - 140 degree F(-20?-60?).Equipped with upgraded intelligent clamps, the Jump....
?Quick-charge output?Battery booster has dual USB output port(output 1:5V/2.4A,9V/2A,12V/1.5A QucikCharge 3.0.
?LED Flashlight?Battery jump starter comes with 4 modes of LED light(normal, strobe, SOS, off), which is a great help for outdoor activities and car....
?Your Attention?The device does NOT come with a wall charger. It's compatible with most 5V 3A home chargers. We offers a lifetime of friendly customer....

Check Stock

Audewdirect Jump Starter 1500A Peak Current 18000mAh 8.0L Gas Engine and up to 6 L Diesel Engine Portable Car Jump Starter 12V Car Battery with Quick Charge Epower-172

【Compact and Powerful】Car jump starter with 18000mAh battery,1500A jump starter can start 12v vehicles(up to 8.0L petrol or 6L....
【Safety Technology】UL2743 Certified. Works properly at -4°F ~ 140°F（-20℃~60℃）. Equipped with upgraded intelligent clamps, the Jump....
【Quick-charge output】Battery booster has dual USB output port(output 1:5V/2.4A,9V/2A,12V/1.5A QucikCharge 3.0.
【LED Flashlight】Battery jump starter comes with 4 modes of LED light(normal, strobe, SOS, off), which is a great help for outdoor activities and....
【Your Attention】The device come with a wall charger. It's compatible with most 5V 3A home chargers. We offer a lifetime of friendly customer....

Check Stock

Rattlesnake Wireless Rotary Tattoo Machine Pen 1850mAh Power Supply LED Digital Display Japan Motor(matte black)

☆【ROTARY PEN ENGINE】-9V 9000PRM Japan Motor and Advanced Gear System,with Low Energy Consumption But More Power.The Diameter of the Machine is 32mm,Length is 124mm,Net Weight is 179g.
☆【WIRELSS TATTOO MACINE PEN CAPACITY】-1850MAh Polymer Battery,Takes 2-3 Hours for Fully Charge,Work for 4-6 Hours.But USB C Charger Avaliable for Input:100-240V 50/60HZ,Output Voltage:5V/1A,5V/1.5A,5V/3A.
the Battery is Easy Broken by Fast Charger,PLEASE BE CAREFULL.
☆【TATTOO PEN STROK LENGTH】-Stroke Length:3.5mm,Needle Protrusion:0-4.5mm,Continious operation Smooth,Soft,and Quiet,it is Best for Shader,New School and Old School Style.Suit for the Universal Tattoo Cartridge Needles On the Market,More Applicable Brands,More Choices.
☆【TATTOO MACHINE WITH LED DISPLAY】Digital LED Screen Display and Records the Working Voltage and Time.It is Easy to Adjust the Voltage by Pressing the "+" or "-" key with 0.5V Each Time.The Minimum Voltage is 5V,the Maximum Voltage is 11V.Recommended Voltage:7V-10V for Lining,and 6V-9V for Shading.
☆【PACKAGE】-1pc Rattlesnake Tattoo Machine Pen,1pc USB Power Cord, 1pc USB-C Charger.

Check Stock

Battery Charger for Wii & Wii U Remote Controller,4pcs 2800mAh NiMH Rechargeable Battery Packs with 4-in-1 Charging Station for Wii & Wii U Game Remote [ Latest Upgrade Version]-White

【Compatible with Wii Remote】Designed for Wii and Wii U Nintendo Remote Controller / Length of USB cord : 4.1 IN / Station Input voltage:DC 5V / Battery capacity : 2800mAh (Power source requires 5V/1A input).
【4 Port Controller Charger】Come with 4 high-capacity 2800mAh Ni-MH rechargeable battery packs. Charges 4 Wii Remote NiMH rechargeable batteries at once.Charge the batteries directly,no need to charge the remote with battery.Extend your game time after having 4pcs rechargeable battery for Wii & Wii U Remote Controller..
【LED Charging Indicator】The charging station for Wii & Wii U Controller that gives a red or green light for each battery pack to let you know when the charge is ready. Green means Fully charged, Red means Charging..
【Safe Charging】 With over-charged/Over-Current/Over-Heated/Short-Circuit protection to extend the battery life and make battery to be recharged up to 1000 times. No need to change the regular AA battery. Save money and protect the environment by using the rechargeable battery..
【Package inculded】 1xCharger Dock + 4x2800mah Rechargeable Batteries + 1xCable(Controller NOT included.).

Check Stock

Solar Power Bank, Portable Charger 26800mAh with 5V 3.1A Output 2 Inputs, Outdoor Battery Pack with Flashlight IP66 Waterproof Battery Bank for iPhone Android Cell Phones

Power Bank 26800mAh: This solar charger power bank can charge 6 times for iPhone 13 Pro, 8 times for iPhone 12 mini, 4 times for Galaxy S21 ultra, 3.5 times for mini 4. The battery bank is over 1000 times recharging, good for camping hiking..
15W Fast Charge: charging bank’s 2 USB port support 5V 3.1A output, can full charge an iPhone 12 with in one hour, Type-C support 5V 3.1A output/ output, the micro USB is 5V 2.1A input, needs 10.5 hours to full charge the portable phone charger..
Ultra Bright Flashlight: 18 led light on the portable battery back side, great illumination, long press the power button to turn on, the flashlight includes bright, soft, SOS, flashing four modes, widely for outdoor adventure, car repairing and more..
Durable Battery Pack: The solar phone charger is made of premium silicone, PC, ABS materials and large capacity Li-ion battery, IPX6 waterproof, dust proof, shockproof, anti slip for firmly hand held, overcome different environments..
1.65W Solar Charger: 5.5V/300mA 15x7.5cm solar panel is a backup charger when other sources run out, solar charging is affected by many factors such as weather, season, geographic latitude, altitude, atmospheric mass, please full charging the external battery before outdoor..

Check Stock

MakerFocus Raspberry Pi 4 Battery Pack UPS, RPI Pack Standard 10000mAh Raspberry Pi Battery USB Pack Raspberry Pi Latest Version V3Plus Expansion Board Power Supply Type-C for RPI 4B 3B+ 3B 2B+

...mended use: 3V 2.5A power supply★ The document link is obtained in the product description.
The link to the assembly video is available on the product page, Two power supply modes: outdoor portable type and indoor UPS power supply mode: 1) As an outdoor portable power supply, the main board is powered by a lithium battery. The maximum external power supply capacity is: 5.1V. 2.5A. 2) As an indoor UPS power supply mode: the UPS power supply interface is connected to an external 5V power supply, the power supply requires 5V 2A-3A, and the maximum output current can reach 5V 3A..
4+2LED are designed to show the status of battery power, charge or discharge:1) 4 Battery power LEDs: Used to show the current battery voltage and power. 2)The function of the Power LED is to display whether the UPS is supplying power to the Pi, and the LED is on: it means the output is 5V. LED off: Indicates that there is no voltage at the output. 3) Charge charging indicator LED: When the UPS is externally charged via the TYPE-C USB interface, the Charge LED starts to work.
The UPS has overcharge and overcurrent protection functions: When the UPS externally outputs about 4A, the UPS will consider the external circuit to be in a short-circuit state and automatically cut off the....

Check Stock