Top 3d Printer Motherboard Reviews

BIQU Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer

  • A general add-on heated bed power expansion module for 3D printer.
  • Completely solve the hot bed power is too large and the load current issue. It can work with the Anet A8.
  • With this addon module to your 3D printer motherboard you can lead the maximum current up to 15A.
  • Under the premise of normal heat dissipation, this module can work steadily under the condition of I(Max)=15A. Don't exceed 15A during the process.).
  • If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive....
Check Stock

Creality CR Touch 8-Bit Auto-Leveling Accessory Kit, Compatible with CR-10S/V2/V3/S4/S5, CR 20/20Pro, Etc, Can Be Used for All 8-bit Motherboards V1.1.4 / V1.1.5 (Without CR Touch)

  • 【Creality professional design】compatible with all Creality 8-bit motherboard 3D printers. (Only upgrade accessories included).
  • 【Easy to use】The 3D printer with 8-bit motherboard can also perfectly upgrade the CR Touch&BL Touch automatic bed sensor. Collecting information and setting firmware will be easy, 100% brand new and high quality..
  • 【Firmware installation】The firmware can be downloaded from the official website of CREALITY. Use the USB cable to connect the 3D printer of the 8-bit motherboard and the computer to flash the firmware. If you have any questions, please feel free to contact us, Service and support from CREALITY experts..
  • 【Durable】The workmanship ensures good performance, high precision, simplicity, high quality, dexterity and precision, fine workmanship, and outstanding performance..
  • 【After-sales Service】 Life-time professional technical supports,If you encounter unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours..
Check Stock

Official Creality CR-10 Smart 3D Printer Large 3D Printers with Intelligent Auto-Leveling Silent WiFi Remote Control DIY 3D Printers Kits Low Noise Power Supply,300x300x400mm

  • 【Built-in WIFI Function】: The Creality CR-10 Smart 3D printer has two networking modes: WIFI wireless/RJ45 wired. You can use your mobile phone to....
  • 【Intelligent Auto-leveling】The V2.0 upgraded version of the automatic leveling system allows you to print after the first automatic leveling, bid....
  • 【ULTRA-SILENT DESIGN】: CR-10 Smart 3D printer has developed a 32-bit patented mute motherboard, customized low-noise power supply, bid farewell to....
  • 【AUTOMATIC SHUTDOWN】: The 3D printer comes with a screen protector, and it will automatically shut down after printing. The screen will....
  • 【Tips】: The unique design of 3D printer gives us more storage space. The printer base has a magnetic drawer. Inside the drawer, there are some....
Check Stock

TENLOG Hands 2 Pro Independent Dual Extruder 3D Printer,300 Degree high Temperature Nozzle,Upgrade Borosilicate Glass Bed and Silent Mainboards TMC2208 Drive Support PVA TPU PLA ABS 8.6 x8.6 x9.8

  • 【Independent Dual Extruder Design】Our Hands 2 Pro Dual Extruder 3D Printer has double nozzles that are independent of each other, allowing you to....
  • 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the....
  • 【Self-developed Silent Motherboard 】The Hands 2 Pro built-in self-developed silent motherboard tmc2208 driver, which has stronger....
  • 【Easy to Assemble】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5....
  • 【Metal scraper】 when using dual-material mode, the metal scraper is afraid that it will wipe the remaining filament on the nozzle, so there is no....
Check Stock

3D Printer Creality Ender 3 v2 Neo New Upgrade Version with Auto-Leveling CR-Touch Stainless Platform Full-Metal Extruder 95% Pre-Installed Resume Printing 220x220x250mm

  • 【Upgraded Version】Pre-installed Ender-3 V2 Neo printer only 3 steps assembly requires. Friendly to users in the first step. 4.3 Inch UI user....
  • 【CR Touch Auto Bed Leveling】Upgraded CR Touch 16-point automatic bed leveling technology is more stable than the traditional BL touch leveling....
  • 【Full-metal Extruder】Different from Creality Ender 3 V2 3d printer, Ender-3 V2 Neo comes with the upgrade metal Bowden extruder, more durable,....
  • 【PC Spring Steel Platform】Different from ender 3, ender 3 pro, and ender 3 v2, this new-released FDM Ender 3 v2 Neo 3d printer comes with a....
  • 【Silent Motherboard】Ender-3 V2 Neo is equipped with the silent motherboard, which has stronger anti-interference, faster and more stable motion....
Check Stock

Creality CR-6 SE 3D Printer Auto Leveling 3D Printer with Silent Motherboard MeanWell Power Supply and Dual Z-axis Print Size 235x235x250mm for Toys Arts Architecture Medical

  • ...with an innovative leveling-free device, the CR-6 SE 3D Printer is designed with a smart pressure sensor to truly achieve hassle-free and intelligently automatic platform leveling, greatly improving bed adhesion and print quality. CR-6 SE is factory pre-leveled, making the printing much easier..
  • Upgraded 2208 Silent Motherboard: This Creality CR-6 SE 3D Printer comes with Advanced Built-in 2208 Silent Motherboard. The printer won’t disturb your work or rest during printing, no noise with great printing effect..
  • Working Temperature: It only takes 1 Minutes to heat up the nozzle ( 200-250 degree ) and the hot bed ( 50-60 degree ) before you start printing..
  • 24V & 350W Power Supply: CR-6 SE is matched with MeanWell power supply, produced by the listed company with mature technology, meeting all the needs of fast heating and long-time printing. In addition, the power supply is concealed in the machine, making it much safer and neater..
  • Official Creality 3D Amazon Shop: All of our printers are delivered from official creality 3D Amazon shop with considerate 24 Hours After-Sales Services including original part replacement For Free and technology consult, ensuring remarkable user experience! Pls Contact us At Any Time if you need any help here!.
Check Stock

HICTOP Al13-310 3D Printer with Linear Guide Rail on All Axis Auto Leveling Filament Sensor Metal Large Print Size 300*300*290mm

  • 1. There is a linear guide rail and a screw rod in each axis of the HICTOP Al13-310 3D printer which can greatly improve the printing accuracy..
  • 2.One X axis, double Y axis, and double Z axis of this metal 3d printer are exactly the same with each other if any axis is damaged, it can be replaced directly, which improves the convenience of maintenance..
  • 3. Al13-310 3D printer supports high-speed printing of 300mm/s, we suggest you to print at normal speed for the first layer and add the speed to 300mm/s after the first layer finishes. Special PLA for fast speed 3D printer prints better and normal PLA can also print very well..
  • 4. This printer is reallly easy to use for beginners as leveling the bed is supper easy, you can auto level or manual level the bed and changing the Z offset and no need to roll the wheels under the bed..
  • 5. 32-bit silent motherboard and TMC2209 stepper driver effectively reduce working noise,it is about 55 decibel when printing, not exclusive ultra-quiet but still quite quiet for printer with this structure..
Check Stock

GIANTARM Upgraded 3D Touch 3.2V Auto Bed-leveing Sensor Kit Accessories for 3D Printers Improve Printing Precision

  • 【Best Beginner Printer】Ender 3 V2 is an ideal Printers for Beginners,It's easy to Install and Operate.It's good upgrade for the DIY 3D Printer.....
  • 【Upgrade Mainboard】Self-developed Silent Motherboard: The Ender-3 V2 built-in self-developed silent motherboard, which has stronger....
  • 【Premium Quality 】UL Certified MeanWell Power Supply: Equipped with MeanWell power supply, produced by the listed company with mature technology,....
  • 【Resume Printing Function】: Can resume printing from the last recorded extruder position after suffering unexpected power outages, saving your....
  • 【Customer Service】The Ender 3 v2 is Ceality Original,If you have any question for the printer, Pls feel free to contact us at any time,We will....
Check Stock

Prusa Specific Thermistor (MK2, MK3) (PRUSA-THERMISTOR)

  • The Original Prusa i3 MK3S+ is the latest version of our award-winning 3D printers, equipped with US Power Supply and 8GB SD card.
  • This listing is a DIY KIT for self-assembly.
  • We also offer a fully built and tested 3D printer.
  • Fully automatic Mesh Bed Leveling process, IR filament sensor built-in, supports filament auto-loading.
  • Genuine Gates belts, Bondtech drive gears, EINSY RAMBo motherboard, and many other features are the reason why the MK3S+ is the perfect 3D printing workhorse.
  • The kit includes a free 1kg filament spool of Silver PLA.
  • Prusa Research offers lifetime technical assistance and 24 hours professional customer service. This printer is sold directly from Prusa Research.
Check Stock

Comgrow Creality 3D Printer CR-10 V3 New Version and Firmware Upgrade Silent Mainboard Resume Printing 300x300x400mm with Meanwell Power Supply Support DIY Ex

  • ...o avoid filament stringing and oozing during printing..
  • 【DUAL PART COOLING FANS EXTRUDER】✔️Two part cooling fans of Creality large 3D printer are installed on the two sides of the hotend. This can promote to dissipate heat and cool down immediately, thus reducing jamming and poor-spillage..
  • 【UPGRADED SILENT MOTHERBOARD】✔️ CR-10 v3 3D printer has adopted industrial self-developed motherboard backed by TMC2208 ultra silent driver. It demonstrates firm properties as well as reduces noise. 1.1.6 Version firmware, theminal runaway protection and resume printing function are pre-installed in the motherboard..
  • 【ALL METAL FRAME AND TRIANGLE STABLE STRUCTURE】✔️ Creality FDM 3D printer adopts all metal frame and the high quality V-profile structure , forms a firm golden triangle that effectively reduces errors caused by vibrations and makes CR-10 V3 more Likely to print out with high accuracy prints..
  • 【WARRANTY】✔️ Our experienced 3D printing engineers are available 24/7 to offer you lifetime technical support as well as our 1-Year limited manufacturers replacement part. If you are not satisfied with the results of your prints, contact us and we will work with you to provide assistance until you are printing like a pro!.
Check Stock

Creality Ender 5 Pro 3D Printer Upgrade Silent Motherboard and Metal Feeder Extruder with Capricorn Bowden PTFE Tube

  • 【Upgraded V4.2.2 silent Mainboard】Ender 5 pro Upgrade Motherboard Silent Mainboard with TMC2208 Driver.
  • 【Metal Extruder Frame】Creality Ender 5 Pro 3D Printer is a highly durable metal extruder . This feature provides stronger pressure while pushing filament through the 3D Printer's nozzle.
  • 【Premium PTFE Tube-High】The Capricorn Bowden PTFE Tubing has a 1.9mm ± 0.05mm inner diameter, reducing any excess wiggle room and preventing the filament from buckling inside of the tube.
  • 【Cube Frame 3D Printer】Ender 5 Pro has a rigid extruded aluminum cube frame, making it very sturdy when assembled properly, which goes a long way to increasing print quality.
  • 【1-year warranty】We have equality warranty and provide after-sale customer service for the product. If any quality issue, Please feel free to contact us via Amazon, we will offer professional instructions and solutions timely..
Check Stock

Sindoh 3DWOX 1 Education Curriculum Bundle – Includes a 3DWOX 1 3D Printer and a Sindoh Success Pack Lesson Plans 18 Month Access to Online Resources

  • Fully assembled: The 3D printer is fully assembled and can be used out of the box without any assembly steps. Build Volume:120 x120x120(mm). And it....
  • Application: suitable for education, animation design, film props and other fields. Especially suitable for beginners, kids. It can be used as....
  • Silent Printing: It uses silent driver chip TMC2208 motherboard and prints with a low decibel, the science education, home use, personal office are....
  • Dual Optical Axis: Professional small 3D printer supported by dual optical axis, which greatly improves the stability of 3D printer frame....
  • After Sale:Technical support and professional customer service(Chinese time,Monday to Friday 8:30-17:00).
Check Stock

ANYCUBIC Vyper 3D Printer Auto Leveling Upgrade Fast FDM Printer Integrated Structure Design with TMC2209 32-bit Silent Mainboard Removable Magnetic Platform 9.6 x 9.6 x 10.2 Printing Size

  • Large Print Size & Auto Leveling, Small body but Large printing volume of 9.6"(L) x 9.6"(W) x 10.2"(H) / 245 x 245 x 260mm, ANYCUBIC Vyper 3D printer....
  • Accurate & Silent Printing, Vyper FDM 3D printer Equipped with new 32-bit motherboard and high-performance Cortex -M3 architecture main control chip,....
  • PEI Spring Steel Magnetic Platform, Vyper 3D printer adopted a new platform of a special coating combined with spring steel,....
  • Fast Printing, Vyper printing head adopts a double fan two-way heat dissipation system, helping to cool down models rapidly. Compared with ordinary 3D....
  • More Function, A, Fast Assembly, integrated structure and modular design. B, 4.3 inch large-size touch screen, easy to operate. C, Double-gear....
Check Stock