Top 316 Stainless Steel Screws Reviews

#10 x 3 Inch 316 Marine Grade Stainless Steel Wood Screws 350 Pack T25 Star Drive Type 17 Point for Docks Decks Jetties Fences or Any Coastal Marine Construction by Eagle Claw Fasteners

TYPE 316 MARINE GRADE STAINLESS STEEL WOOD SCREWS - ideal for all exterior woodwork and construction projects..
FOR USE IN HIGHLY CORROSIVE APPLICATIONS - Eagle Claw Fasteners 316 grade stainless steel wood screws are recommended for use in highly corrosive coastal, wet and outdoor applications including for docks, decks, balustrades, boat building, fences, jetties, walkways, saltwater pools and general timber construction..
EXTREMELY HIGH MARINE GRADE 316 STAINLESS STEEL - Marine grade stainless steel wood screws prevent ugly rust stains on your beautiful outdoor timber structures, and give you a quality fastener that will outlast the timber in saltwater or high corrosion environments..
STAR DRIVE HEAD (TORX DRIVER INCLUDED) AND TYPE 17 POINT - Eagle Claw Fasteners stainless steel wood screws have a star drive head (torx driver included) and type 17 point for easy driving (pilot holes recommended). Nibs under the head help seat the screw. Note that these are not self drilling screws..
SUITABLE FOR VARIOUS WOOD TYPES - Eagle Claw Fasteners stainless steel wood screws are suitable for use with all hardwood, softwoods and pressure treated lumber including redwood and cedar..

Check Stock

Marine VHF Antenna Mounts, Adjustable Base VHF Antenna Mount for Boat, 316 Stainless Steel, Heavy Duty, Include Installation Accessories Screws

【Size】: Fits all standard 1-inch marine antennas. Base measures 3.62x 2.52 inch..
【316 Stainless Steel】:TINGZHIGO Marine VHF Antenna Mounts are made of 316 stainless steel. In humid air or high-temperature weather, compared with 304 stainless steel or iron material, 316 stainless steel has stronger anti-rust, abrasion resistance..
【Dual Swiveling Ratchet Design】Dual swiveling ratchet design, the marine VHF antenna mounts have two adjustable ratchets that can be easy to adjust mounting on slanted or level surfaces..
【Easy for installation】Upper ratchet: When the handle is set upright, you can adjust upper ratchet, it has an adjustable angle of 270 degrees. Once you have determined the angle you want, pull the handle down to hold it in place. Lower ratchet: First, you loosen the screw in lower ratchet and you can adjust it to the angle you want. The lower ratchet has an adjustable angle of 180 degrees. Finally, you have determined the angle you want, tighten the screws in lower ratchet..
【Packaging】: 1x Marine VHF Antenna Mount,4x Screws,4 xBolts,4x Nuts . We provide screws for you to install. You can choose the screws according to your actual situation. (Screws are made of 316 stainless steel). Before delivery, we will carefully check ....

Check Stock

Yanyu 2 Pcs 2\ x 2\ Boat Hinge Heavy Duty Flush Mount Hatch Hinge Cabinet Butt Strap Hinges Marine Stainless Steel 316 with Screws

Heavy duty stainless steel hinges for boat deck flush hatch cabinet..
Boat Door Hinge L x W :2" x 2" (50 x 50 mm). Thickness:Approx.0.2 inch (5 mm) Door Hinge.(Please see the left picture for specific size)..
Stainless steel 316 silica sol precision casting, resistant to seawater corrosion .Mirror polished Stainless Steel Door Hinges are built to last and will stand up to the elements..
Boat hinge uses 4.8 x 19mm screws, can be flush mounted, easy to install,Mounting for home/marine boat/yacht door or window, locker, cabinet, deck, tool box and so on..
Package Includes:2 pieces of 2" x 2" Strap Hinge Door Hinge (stainless steel 316) ,8 pieces 4.8 x 19 mm screws (stainless steel 316)..

Check Stock

ZOMCHAIN Marine Flag Pole with Base, Flag Pole Holder, 316 Stainless Steel Flag Pole Set for Boat, Yacht, Truck and Yard - Flag Pole 23.62inch/60cm

✔Anti-Corrosion Materials: Flag Pole, Mount and All Installation Accessories are made of precision cast 316 marine grade stainless steel, highly polished to a beautiful mirror-like finish..
✔ 316 Stainless steel: Marine grade 316 stainless steel, Excellent seawater corrosion resistance and durable, which can stand up to kinds of weather. Suit for installation on Boat, Yacht, Truck and RV..
✔ Size：The mount diameter is 2.75in / 7cm, Flagpole length 23.62in/60cm, the diameter of screw hole is 0.24in / 6mm, best use 0.24in / 6mm diameter drill..
✔ It allows mounting at 80-degree angles.Both screws and bolts are designed to be lengthened to make the installation more stable and firm..
✔ Packaging: There are a kinds of screw fittings for your choice, Screws x3, Bolts x3, Nuts x3, hexagon bar wrench x1, all 316 Stainless Steel..

Check Stock

YaeMarine 4-Pack Stainless Steel Fishing Rod Holder Slide Mount Removable Rod Holders for Marine Boat Yacht

【Material】: 316 stainless steel, Mirror Polished Finished,.
【Feature】: Vertical mount removable rod holder can easily be removed when not in use, 8mm diameter drain hole at base of rod holder to drain any captured water. Rubber insert to protect your fishing rod from any wear against the stainless surface..
【Easy To Install】: Vertical mount removable rod holder can easily be removed. Rod holder protrudes at a 30 degree angle when mounted. mounting bracket requires 4 countersunk screws (screws not included)..
【Save Space】: When rod holder is removed, only the low profile mounting bracket will remain mounted, Ideal for small tinnies when space is limited, or boats that aren't constantly used for fishing..
【Package Included】: 4 x 316 stainless steel rod holder, 4 x 316 stainless steel mounting bracket, 4 x Rubber insert (fitted).

Check Stock

#14 x 4 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 500 Type 17 Wood Cutting Point 2-3/4 of Thread Length 14 Screw Diameter 4 Screw Length

HIGH QUALITY STAINLESS STEEL: These #14 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
Type 17 Point - This thread cutting screw is ideal for use with wood.
it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
Size Number: #14 / Length of Screw is 4" inches with 2-3/4" inches of thread.

Check Stock

#14 x 5 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 100 Type 17 Wood Cutting Point 3-1/4 of Thread Length 14 Screw Diameter 5 Screw Length

HIGH QUALITY STAINLESS STEEL: These #14 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
Type 17 Point - This thread cutting screw is ideal for use with wood.
it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
Size Number: #14 / Length of Screw is 5" inches with 3-1/4" inches of thread.

Check Stock

#10 x 3-1/2 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 100 Type 17 Wood Cutting Point 2 1/4 of Thread Length 10 Screw Diameter 3 1/2 Screw Length

HIGH QUALITY STAINLESS STEEL: These #10 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
Type 17 Point - This thread cutting screw is ideal for use with wood.
it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
Features a Bugle Head, and a Square drive to be used with a #2 Square Drive.
Size Number: #10 / Length of Screw is 3-1/2" inches with 2-1/4" inches of thread.

Check Stock

Marine Docking Lights Boat LED Light 2pcs 6300K IP66 Waterproof Marine Boat Navigational Side Bow Tear Drop Lights Stainless Steel Flush Mount

☼High-quality materials: The lampshade of the ship's side light is made of SS stainless steel polished shell (corrosion-resistant 316 stainless steel), high-quality LED light source, service life of more than 30,000 hours, and low energy consumption..
☼ Perfect mosaic surface: LED light has a smooth shape and corrosion-resistant 316 stainless steel shell, which can perfectly integrate the surrounding environment. At the same time, the product list is 2 lights, 2 x installation screw package (4 x screws, 1 x bolt), easy to install..
☼Waterproof design: IP66 waterproof design, with stainless steel polishing shell to prevent water from flowing into the wick, and the working voltage is lower, 12V, making the water area healthyr..
☼ Standard: This waterproof spotlight meets or exceeds ABYC, UL, NMMA72 COLOREGS US Inland Navigation Rules and Coast Guard Supervision.
☼Unique optical design: small curved holes are reserved on the side of the lamp body, which can be used as an indicator to beautify the atmosphere. Using high-efficiency light source, the lamp body can emit 300LM brightness..
☼ Perfect mosaic surface: LED light has a smooth shape and corrosion-resistant 316 stainless steel shell, which can perfectly integrate the surrounding environment.....

Check Stock

YYST Boat Cooler Tie-Down Strap Tie-Down Kit Tackle Box Tie-Down Strap kit SS 316 Cam Buckle and Deck Loop for for RVS, Boats, Trailer and Truck Beds to Keep Your Cooler Secured - No Cooler

The kit includes two nylon straps with stainless steel 316 cam buckles, two stainless steel 316 deck loops, and 4 stainless steel screws..
Tough Material - straps are made of durable and UV-resistant nylon webbing. Cam buckles and pad eyes are made of stainless steel 316, marine grade stainless steel..
Longer Length – 54 Inches (140CM) is long enough for most coolers on the market . If you think it is too long ,Please cut it and flame it.Easy to use - wrap the strap through the deck loops, and pull the buckle..
Secure your cooler in a boat, truck bed, trailer etc. Prevent your cooler from moving around on a boat deck..
Stainless Steel 316 Cam Buckle and Stainless Steel Deck Loop - No Rust ..

Check Stock

Ferraycle 6 Pieces Surfing Accessories No Tool Stainless Steel Fin Screw Thumb Fin Screw for Men Women Surfboard Surf Longboard Paddleboard and SUP

Package contents: the package comes with 6 pieces of fin screws and plates, which can meet your demands of application and replacement daily life as....
Reliable material: these no tool fin screws are made of a quality material called 316 stainless steel, solid and stable, not easy to broken, deform or....
Portable and lightweight: the stainless steel fin screws are compact in size so that they are easy to store and will not take up so much space as well....
Simple to operate: this thumb fin screw is easy to install, you don't need other tools, suitable and friendly for beginners and those who like....
Applicable occasions: our 316 stainless steel fin screw and plate are suitable for many types of surfboard, such as long board, single board, single....

Check Stock

VEITHI 8 inch 316 Stainless Steel Boat Cleat Boat Cleats 8inch Open Base 4Pack ,Boat Dock Cleats Include Stainless Steel Screws

316 Stainless Steel Cleats 8 inch- Investment casting 316 stainless steel construction, durable in saltwater environment and good performance,Include 4 boat cleats with 16 stainless steel screws,Rope cleat work for dock lines ,mooring and etc..
Multi Purpose- These 8 inch stainless steel cleats is high polished surface for mirror-like appearance to match marine uses watercraft/boat/yacht,boat docks, decks, piers for tying up boats, kayaks, jet ski's,etc..
Dock cleat open base- These stainless boat cleat easy line tie-off for any Boat have four holes for attachment..
Size&Hardware- 8-inch L x 1-1/2-inch H ,Base measures 2.05-inch x 3/4-inch.
Mounting holes 2.95-inch center to center, stainless boat cleat with hardware, M6x40mm (1.57in) stainless steel screws, perfect size to fit any use..
Home Nautical Decor- These cleats for boats make your home stand out.
perfect for maritime, beach, garden, pool, coastal decorations.
use them as cabinet pulls, boat cleat towel rack, rustic coat hanger, curtain tie-backs, nautical coat hooks..

Check Stock

YYST 54' Battery Tie Down Strap Kit Battery Hold Down Strap with Stainless Steel 316 Buckle, Stainless Steel 316 Deck Mounts, 4 SS Screws -1/PK

The kit includes : One 54 inch nylon webbing. and one stainless steel 316 buckle , 2 stainless steel 316 deck mounts , 4 SS screws . Only one kit..
Material : The webbing is made of heavy duty nylon , UV - resistant . The buckle and the deck mounts are made of stainless steel 316. Last for years..
Suitable for Boat Marine RV auto trainer use..
Ideal for securing battery boxes and other equipment..

Check Stock