Top 3 port Manifold Reviews

PHITUODA 1\\/2 3 Ways 6 Ports Air Hose Inline Manifold Block Splitter, Pneumatic Air Compressor Manifold Fitting with Pipe Sealant Tape - Pack of 2

  • *Package Included: 2 x Air Hose Manifold Block, 2 x Pipe Sealant Tape. Position: 3 Ways. The number of Threaded Ports: 6 Ports. Threaded Port Dia: 1/2" BSPT..
  • *Premium Material: The manifold body is made of high corrosion-resistant anodized aluminum with a sky blue brushed nickel finish, which makes it not easy to deform, more durable, and 50% lighter than standard fittings..
  • *Practical Design: The operating pressure is 0 to 1MPa / 145 PSI. Guaranteed pressure resistance is 1.2MPa / 175 PSI. The max working pressure is 2MPa / 300 PSI. The working Temperature is 32 - 140 ℉ / 0 - 60 ℃..
  • *Ideal Application: Manifold Block takes one line of air from a pump, air cylinder, compressor, vacuum engine, or other such system and splits it into many of them. All ports are in the same size so that you can use it as a 1 in 5 out, 2 in 4 out, 3 in 3 out, and so on to meet your own requirement..
  • *Hassle-Free Guarantee: PHITUODA's products can only be packed and shipped after strict quality inspection. If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. We're so confident you will love our products like our other 5-star reviewers! You will be amazed at the customer service you receive after the sale!.
Check Stock

Remflex 2006 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-3/8 inch width x 1-1/2 inch width Square Port - Matches the Stock cast iron Head Port.
  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Stock Port, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1404.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

Universal Air Conditioning HA10458C Manifold And Tube Assembly

  • Air Locker Manifold Kit enables the installation of Air Locker solenoids to an ARB Twin Compressor.
  • Complete manifold kit to suit Air Locker solenoid mounting on the ARB On-Board Twin Air Compressor Kits..
  • This kit includes a manifold body with mounting bracket, BSPP ports, NPT ports, high temperature resistant braided hose, NPT connection nipples and M6 hex head bolts and nylon lock-nuts which secure this kit..
  • This manifold permits you to lock the front and rear air lockers without needing a compressor for each..
Check Stock

EFIELD Pex Manifold 3 Outlets Poly PPSU Barb Crimp Closed 3/4 Trunk 1/2 Port 3 Ports F2159

  • Directly from One of the Biggest Plumbing Systems Manufacturers.
  • 1 Piece Closed Manifold: 3/4 Trunk, 1/2" Port (3 Ports) Poly PPSU Barb Crimp Pex Fittings, Lead Free.
  • This Efield Product Suits with all Types and Brands of Pex Tubing.
  • Made of Poly(PPSU), Better Performance than Brass Manifold in RO, Chlorinated Water Application.
  • Compatible with Stainless Steel Clamp & Copper Crimp Ring Systems.
  • ASTM F2159 NSF/ANSI 61 NSF 372 Certified.
Check Stock

Magic&shell Pneumatic Manifold Block Splitter 2PCS 1\\/2Inch 3 Way 6 Port Aluminum Air Hose Coupler Distribution Block Bar Line Splitter Manifolds

  • Including packaging: 2PCS air hoses. Location: 3 ways. Number of threaded ports: 6 ports. Thread port diameter: 1/2" BSPT..
  • The main body is made of highly corrosion resistant anodized aluminum and has a sky blue brushed nickel coating, making it less deformable, more durable, and 50% lighter than standard accessories..
  • The working pressure is 0 to 1MPa / 145 PSI. The guaranteed pressure resistance is 1.2MPa / 175PSI. The maximum working pressure is 2MPa / 300 PSI. The operating temperature is 32-140 degrees Fahrenheit / 0-60 degrees Celsius..
  • The manifold block takes a piece of air from a pump, cylinder, compressor, vacuum engine or other similar system and divides it into many parts. All ports are the same size, so you can use it as 1 in 5 out, 2 in 4 out, 3 in 3 out, and so on to meet your own requirements..
  • The cylinder manifold is the starting point of the cylinder system..
Check Stock

Air Outlet Kit for 3\\/4 Inch Tubing System with 1\\/2 Inch NPT Outlet Port (Base Kit)

  • Material: 6061 anodized Aluminum for the manifold.
  • Brass material with Nickel plating for fitting and drain valve.
  • Working Pressure: 200 psi maximum working pressure.
  • Thread Size: 1/2 NPT threads at on the front, top and bottom of the manifold( 3 ports).
  • Kit includes: Aluminum manifold, Drain ball valve, 1/2 inch NPT straight fitting and PTFE Tape.
  • Installation: Easy installation and the tubing also can be removed if needed.
Check Stock

JIFETOR 3 Way AC Manifold Gauge Set, HVAC Diagnostic Refrigerant Charging Tool for Auto Household R404A R134A Refrigerant, Quick Couplers Adapter Valve Core Tool (3FT Hose, Can Tap, Blue Case)

  • AC MANIFOLD GAUGE: 3 way double movement brass manifold auto AC gauge, durable and anti-corrosion. Blue low pressure gauge with range -30inHg~250PSI, and red high pressure 0~500PSI, Celsius unit. 2-3/4″ easy to read large dial with color coded scale, and sight window on the manifold help to monitor refrigerant charging and recovery better and easily. Built in calibration screw and no-flutter pointer ensure measurement accuracy. Perfect for R404A R134A.
  • 3 3FT COLOR CODED HOSES: Refrigerant charging kit uses rubber nylon resin hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is 2500PSI. Each side is loaded with 1/4″ female brass fittings for easy connection. Red hose connects red gauge side 1/4″ male flare to red quick coupler, blue to blue, and yellow hose connects AC gauge middle charging port to can tap or vacuum pump.
  • AC R134A QUICK COUPLERS: Premium brass and aluminum, quick interface design with accurate snap lock and anti-slip knurled grip ring, easy to connect and disconnect, compatible with all models with R134A service port. Connect the blue coupler to AC suction service port and the red one to AC discharge service po....
Check Stock

6 Way 8 Port Air Manifold, G1\\/2 Supply Port, G1\\/4-Inch Output Port, Pneumatic Air Manifold Distribution Block, Industrial Aluminum Alloy Air Compressor Manifold

  • 【High Pressure Resistant & Better Sealing】 Acrux7 air distributor block has high pressure resistance and strong sealing. Air manifold for distributing pneumatic power to multiple locations from a single source..
  • 【Precision Air Distributor】Total Size: 20.3x3x3cm/8"x1.2"x1.2"(L*W*H).
  • Ports Diameter:11mm (0.4 in). Two G1/2" inlet ports and six G1/4" outlet ports.
  • 【Easy & Fast to Connect】The air compressor is equipped with quick connection couplers which is easy to connect and disconnect. Simply thread pneumatic fittings into the ports of the distribution block to produce an organized method of supplying multiple lines from a single source..
  • 【Industrial Aluminum Alloy】Manifold block is made of aluminum for less weight than brass and resistance to corrosion. Efficient and stable performance, easy to install and sustainable..
  • 【Excellent Air Manifold】Air manifold is suitable for air compressor or storage gas equipment branch outlet, or used as supporting parts of machine equipment, generally installed in the gas terminal branch interface or engineering wiring pipeline branch..
Check Stock

SMC KM11-07-11-6 PBT Push-To-Connect Tubing Manifold, 2 Inlets-3/8\

  • Port A One-touch Fitting, Port B One-touch Fitting.
  • One-touch fittings give the most efficient operation.
Check Stock

Value Plastic 4PX210-6 Four-port Cross Style Manifold w/Barbed Fittings 1/16\ (1.6 mm) Tube ID Natural Polypropylene (pack of 25)

  • Allows individual hot and cold lines to be connected directly to each fixture.
  • Creates a single point shutoff for all home fixtures.
  • Each manifold has an equal number of hot and cold outlets - Outlets are 1/2" PEX barb shut-off valves.
  • Inlet sizes are 1" MPT - Each manifold comes with a reducing adapter to 3/4" PEX barb.
Check Stock

3 Way Air Hose Coupler Distribution Block Bar Line Splitter Manifold 1\\/4 NPT

  • 3 Way Air Hose Coupler Distribution Block Bar Line Splitter Manifold 1/4" NPT.
  • Five- 1/4" Female NPT Ports (End Ports Come with Removable Plugs).
  • Solid Aluminum Black Finish Use To Run Mulitple Tools / Air Lines Measures: 3-3/4" Long x 3/4" Thick.
  • **1/4" NPT Ports Measure Approx. 1/2" Diameter** Couplers and plugs are NOT included with this purchase..
Check Stock

MIXC 2023 Newest 12-Port Manifold Drip Irrigation Kit,114FT Garden Irrigation System for Outdoor Plants, Automatic Watering Sprinkler System DIY Greenhouses Kits for Lawn, Raise Bed, Patio, Yard

  • ✔Ideal Drip Irrigation System：A set of drip irrigation kit that satisfy all your functions.garden irrigation system kit include: 100 ft flexible & durable 1/4 irrigation tubing+14FT 1/2 Main irrigation tubing+2 *quick connectors（Connect 1/2 tubing and 12-Port Manifold)+2*12-Port Manifold (2*Support Stake+2*3/4''Output Adapter+4*Samll and Big End Plug)+15*360 Degree Drip Emitter+15*Fan Shape Drip Emitter+1*"Y" Fanucet Connector+10*1/4" end plug..
  • ✔2023 Newest Irrigation Accessories : 12-port manifold can evenly distribute the water flow distributed by the main pipe, so that each outlet hole water volume and pressure are the same, to help you solve the problem of water shortage at the end, instead of cumbersome accessories, DIY garden watering system at the same time to save the installation time, can be reused in each season..
  • ✔Precision Irrigation: Some plants need a slow trickle that seeps through the soil to keep the roots moist while others may thrive with a fine mist. Each drip irrigator is adjustable to different irrigation modes (microdroplets, sprays, watering) to help precisely irrigate plants in different locations and save up t....
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • Brand New Holley Modular Lo-Ram EFI Manifold Kit, Top-Feed Plenum, Black Finish, Compatible with LS1, LS2 & LS 6 Gen III & IV Engines (Part #300-620BK).
  • The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 ....
Check Stock