Top 3 piece Tap Sets Reviews

Blue Shell Tread Design 3 Piece Comforter Quilt Bedspeads Sets Queen Cotton White&Blue

  • ❤️ Dimension: The quilt sets available in Twin, Queen and King Size. The Queen Size Quilted Bedspread Sets 3 Pieces includes 1 quilt 90" x 98" (230cm x 250cm), and 2 matching pillowcase 19" x 27" (50cm x 70cm)..
  • ❤️ Good Material: Top Layer & Bottom Layer is Cotton fabric, and filling is 100% Cotton. Lightweight and not too thick to keep you comfortable, and from breaking out in sweat..
  • ❤️ Design And Features: Coastal ocean themed quilt bedspread set, The front is blue seashell conch starfish pattern, and the Reverse is solid blue color. The design add a feeling of beach sunshine holiday to your bedroom..
  • ❤️ Service: Vacuum Packaging. Recommended to wash the quilt and hang it out in the sun and tap it gently for fluffy blooms. ⛱ If you have quality problem, plesae contact us for free exchange..
  • ❤️ Washing Method: Machine Washing, Gentle Cycle. Water Temperature Should Not Exceed 30°C. Tumble dry low heat. Do Not Bleach..
Check Stock

3 Pieces Set A/C R134A Refrigerant Charging Hose R134A Charging Hose Quick Couple, 1/2 in Male 1/4 in SAE Female Can Tap Valve, BPV31 Bullet Piercing Tap Valve Compatible with GPV14 GPV31 GPV38 GPV56

  • Package information: 3 pieces set in total, come with 1 piece R134A charging hose with gauge and 2 pieces BPV31 bullet piercing tap valve kit, each kit includes 1 piece piercing valve, 1 piece hex key and 2 pieces adapters.
  • R134A refrigerant charging hose: the length of charging hose is approx. 59 inch/ 149.8 cm, charging hose comes with pressure gauge for easily viewing during use, pressure gauge scale is 0 – 200 PSI, the 1/2 inch end fits R12, R22, R502 fittings,the R134a can tap is only suitable for R134A refrigerant of vehicle or home air-conditioning.
  • BPV31 bullet piercing tap valve: it can replace part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31, it is compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
  • About material: the bullet piercing tap valve is made of corrosion-resistant metal mainly, not easily worn out or rust, the refrigerant charging hose is made of rubber material mainly, it is resistant to high pressure.
  • Easy to install: you just need to install bullet piercing tap valve by the hex key in the package, the installation process will not take up too much space, easy and convenient, using bullet piercing tap valve can effectively avoid accidental discharge of refrigerant.
Check Stock

4 Sets Garden Expandable Hose Repair Kit Faucet Adapter Hose Female Male Connectors with 4 Pieces Hose Shut Off Valve and 8 Pieces 3/4 Inch Rubber Gaskets

  • What you get: 4 sets of garden expandable hose repair kit, 4 pieces of shut off valve and 8 pieces of rubber gaskets, which can fit with garden expandable hose, enough quantity for you to use and replace in garden work.
  • Practical design: this garden expandable hose repair kit with hose shut off valve features the thread design, which can be tightly connected without the help of other tools, and the rubber gasket can be applied together to well prevent water leakage.
  • Quality material: faucet adapter hose female male connectors and shut off values are made of quality plastic, sturdy and durable to use, which won’t break or deform easily, the gasket is made of reliable rubber, both materials can be applied for a long time.
  • Convenient to use: just insert a hose into the faucet adapter hose connector by hand, then tighten the connector to use it, easy to open or close the water source through the shut-off valve without returning to the tap, convenient to use in daily life.
  • Various applications: this garden hose connector set fits for most 3/4 inch garden hose thread watering equipment, including spray nozzles, water tap, also nice fittings to repair your garden hose, meeting your different needs in different occasions.
Check Stock

Hanson 12008 1\ Rd Hex Plain Die Stock for Tap Die Extraction

  • CUT AND RENEW THREADS: The ABN Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads is a comprehensive set for cutting and renewing external and internal threads to exact standards.
  • SIZES: Metric taps 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF taps 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • Metric dies 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC dies 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF dies 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • BUILT TO LAST: Constructed from hardened alloy steel for maximum strength and longevity.
  • Can cut materials such as cast iron, steel, aluminum, copper.
  • EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes coarse and fine threads numbered taps and dies from #4-40 to #12-24 and fractional taps and dies from 1/4"-28 to 1/2"-20, 1/8"-27 NPT tap and die, metric tap and dies from M3x0.5 to M12x1.75, thread gauge, tap handle, die h....
Check Stock

6 Pieces 6015 R134A Brass Refrigerant Tank Adapter to R12 Fitting Adapter 1/2 Female to 1/4 Male Flare Adaptor Valve Core and 6014 Vacuum Pump Adapter 1/4 Inch Flare Female to 1/2 Inch Male

  • You will receive: 3 sets are total of 6 pieces, including 3 pieces 6014 vacuum pump adapter and 3 pieces 6015 R134A refrigerant tank adapter, more....
  • Practical adapters: these tank adapters are as charging and service tools, can be applied to vacuum pump, can tap or oil injector to adapt between....
  • Function feature: these tank adapters provide a tight, secure, leak-free connection that allows you to quickly and easily connect and disconnect high....
  • Solid brass construction: these tank adapters are made of solid brass, sturdy to use, corrosion resistant, not easy to rust, you can use them for a....
  • Size details: the size of 6014 vacuum pump adapter is approx. 2.6 x 1.6 x 4.4 inches, the size of 6015 R134A refrigerant tank adapter is approx. 2.6 x....
Check Stock

Segomo Tools 110 Piece Hardened Alloy Steel SAE Tap And Die Threading Tool Set With Storage Case | SAE Tap and Die Set | Rethreading Kit | Tap Set | Tap and Die Kit - TD110SAE

  • ... Performance ] This tap and die set is ideal for cutting and renewing external and internal threads on most metals to exact standards. The tapered teeth of these threading tools are specially designed to start threading easily and smoothly and prevent overthreading..
  • [ Durable Design & Easy Storage ] Our tap and die sets are constructed from hardened alloy steel for maximum strength and durability. They also come in heavy-duty plastic blow-molded carrying case for easy transport, safe storage & quick organization..
  • [ Handy Accessories] This large tap and die set comes also with two tap wrenches (x2): M3-M12, M6-M20, two die wrenches : 25mm, 38mm O/D adn one T-Type tap wrench: M3-M6..
  • SAE Tap Sizes: 4-40 UNC, 6-32 UNC, 8-32 UNC, 10-24 UNC, 10-32 UNC, 12-24 UNC, 1/4-20 UNC, 1/4-28 UNF, 1/4-24 UNS, 1/4-32 UNS, 5/16-18 UNC, 5/16-24 UNF, 3/8-16 UNC, 3/8-24 UNF, 7/16-14 UNC, 7/16-20 UNF, 1/2-13 UNC, 1/2-20 UNF, 9/16-12 UNC, 9/16-18 UNF, 5/8-11 UNC, 5/8-18 UNF, 3/4-10 UNC, 3/4-16 UNF, M6x1.0, M8x1.25, M10x1, M10x1.5, M11x1.5, M12x1.25, M12x1.75, M14x1.25, M18x1.5, 1/8-27NPT, 1/4-18NPT..
  • SAE Die Sizes: 4-40 UNC, 6-32 UNC, 8-32 UNC, 10-24 UNC, 10-32 UNF, 12-24 UNC, 1/4-20 UNC, 1/4-24 UNS, 1/4-28 UNF, 1/4-32 UNS, 5/16-18 UNC, 5/16-24 UNF, 3/8-16 UNC, 3/8-24 UNF, 7....
Check Stock

BSP/BSPP British Standard Pipe Tap and Die Set - 18 Piece

  • BSP/BSPP (British Standard Pipe) Tap and Die Set - 18 Piece.
  • 1 taper tap, 1 bottom tap and 1 die in each size below:.
  • Taps are 1/8" - 28, 1/4" - 19, 3/8" -19, 1/2" -14, 5/8" - 14, 3/4" - 14.
  • Dies are 1", 1-1/2" and 2" OD Round Dies..
Check Stock

TEMO 2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit

  • 2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit.
  • Made of high speed M2 steel. For use with: steel, copper, brass, aluminum. drill, tap and deburr in one operation..
  • Drill, tap and deburr in one operation. Tapered tap design prevents thread damage from over-drilling..
  • One piece construction guarantees proper drill for tap size. | 135 self-centering split point tip. 10 gauge (3.5mm) capacity. Usage suggestions: use of cutting coil recommended. clean tap of metal chips to extend life. reverse drill to back out after completing tap..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

BSP BRITISH STANDARD PIPE BSPP PARALLEL TAP AND DIE SET - 8 SIZE 1/8 TO 1

  • BSP/BSPP (British Standard Pipe) Tap and Die Set - 24 Piece.
  • 1 taper tap, 1 bottom tap and 1 die in each size below:.
  • Taps are 1/8" - 28, 1/4" - 19, 3/8" -19, 1/2" -14, 5/8" - 14, 3/4" - 14, 7/8" - 14, 1" - 11 TPI.
  • Dies are 1", 1-1/2" and 2" OD Round Dies..
Check Stock

RIDGID 44923 Model 690-I Hand-Held Power Drive Kit, Pipe Threading Machine and 1/2-Inch to 2-Inch 11-R NPT Pipe Threading Die Heads with Carrying Case for Threading Pipe

  • CUT AND RENEW THREADS: The ABN Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads is a comprehensive set for cutting and renewing external and internal threads to exact standards.
  • SIZES: Metric taps 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF taps 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • Metric dies 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC dies 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF dies 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • BUILT TO LAST: Constructed from hardened alloy steel for maximum strength and longevity.
  • Can cut materials such as cast iron, steel, aluminum, copper.
  • EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes coarse and fine threads numbered taps and dies from #4-40 to #12-24 and fractional taps and dies from 1/4"-28 to 1/2"-20, 1/8"-27 NPT tap and die, metric tap and dies from M3x0.5 to M12x1.75, thread gauge, tap handle, die h....
Check Stock

Happybuy 110Pcs Tap & Die Set Tungsten Steel Titanium Tap & Die Metric Tool Tap & Die Combination Set For Cutting External & Internal Threads

  • Premium Quality: High-duty heat-treated Tungsten steel construction,  high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
  • Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
  • Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
  • Adjustable Tap Wrench: Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
  • Most Popular Sizes Included: This tap and die set comes with 110 pieces in total: 35 pcs plug taps, 35 pieces taper taps, 35 pcs dies, 2 tap holders(M2 - M12 (1/16" - 1/2"& M6 - M20 (1/4" - 3/4")), 2 die holders (200mm (1" diameter bore)& 270 mm (1 1/2" diameter bore) and 1 T-bar tap wrench, most popular sizes included.
Check Stock

Segomo Tools 110 Piece Hardened Alloy Steel Metric Tap And Die Threading Tool Set With Storage Case | Metric Tap and Die Set | Rethreading Kit | Tap Set | Tap and Die Kit - TD110MM

  • ... Performance ] This tap and die set is ideal for cutting and renewing external and internal threads on most metals to exact standards. The tapered teeth of these threading tools are specially designed to start threading easily and smoothly and prevent overthreading..
  • [ Durable Design & Easy Storage ] Our tap and die sets are constructed from hardened alloy steel for maximum strength and durability. They also come in heavy-duty plastic blow-molded carrying case for easy transport, safe storage & quick organization..
  • [ Handy Accessories] This large tap and die set comes also with two tap wrenches : M3-M12, M6-M20, two die wrenches : 25mm, 38mm O/D and one T-Type tap wrench : M3-M6..
  • Metric Tap Sizes: 2x0.4 , 3x0.5 , 4x0.7 , 5x0.8 , 6x0.75 , 6x1 , 7x0.75 , 7x1 , 8x0.75 , 8x1 , 8x1.25 , 9x0.75 , 9x1 , 9x1.25 , 10x0.75 , 10x1 , 10x1.25 , 10x1.5 , 11x0.75 , 11x1 , 11x1.25 , 11x1.5 , 12x0.75 , 12x1 , 12x1.25 , 12x1.5 , 12x1.75 , 14x1 , 14x1.25 , 14x1.5 , 14x2 (x2), 16x1 , 16x1.5 , 16x2 , 18x1.5 ..
  • Metric Die Sizes: 2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x0.75, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, ....
Check Stock

DressYOU Women's 3 Piece Sweatsuit Lounge Set Cardigan Outfits Open Front Kimono Tank Top Palazzo Pants PJ Casual Loungewear Tracksuit

  • [3 piece lounge sets for Women]: the cozy loungewear is made of 95% Polyester and 5% Spandex. Soft, light, elastic and warm. No fading, no shrinking.
  • [Comfy sets for Women 2 piece]: consists of sexy tank top, high waist loose sweatpants and open front kimono overcoat. Pull on closure with drawstring. Oversized and friendly to any body type..
  • [Pants and kimono set]: the fashion cardigan outfit has long overcoat and wide leg palazzo pants with pocket in multiple colors including green, black gray and khaki..
  • [Plus size 3 piece outfits for women]: 3 piece pajama set, tracksuit, jumpsuit, 2 piece outfits, yoga clothes, sportswear, sleepwear, outwear kimono, athleisure outfit… this casual 3 piece set can be any one of them. Perfect for home, sports, yoga and club in Spring, Summer, Fall and Winter..
  • [Womens 3 piece loungewear sets]: Garment Care of the matching sets for Women: Hand wash(recommended) or machine wash.
Check Stock