Top 3 Spindle Drilling Machine Reviews

480W Electric Bench Top Drill Press Bench Drill Drilling Machine Electric Mini Drill Press Stand for Metals, Wood, Plastic, Aluminum Plate (480W)

【Product Parameter】This is electric bench drill press machine, rated power: 480w, rated current: 0.55a, table size: 17 cm x 17cm, drilling diameter: 1-10mm, max spindle travel: 40mm. The spindle is about 110mm away from the drill bit center..
【Long Life】480-watt motor construction adopts imported bearings, high temperature, and full copper wire processing, shell adopts nylon plastic processing. Which extends the life of the machine..
【High Quality】Bench drill drilling machine with high quality drilling, easy operation, good stability. Great speed, low noise, long life drilling no swing, drill breakage rate is very low, high efficiency..
【High Efficiency】The motor has increased power, which is to increase the life of the motor. High-power miniature portable bench drill precision drilling machine motor. No-load speed：i: 0-5000r/min, ii:0-11000r/min. Drill capacity: woods:φ25mm, iron：φ7mm..
【Wide Application】Bench top drill press is suitable for drilling, expanding and reaming operations on metals and other materials. It can be widely used in a single-piece or mass-produced instrument industry, machinery manufacturing, and repair parts..

Check Stock

42mm Er11 CNC Spindle Transmission Shaft with Holder, High Accuracy Engraving Milling Grind Tool

The spindle has high accuracy ground tapered holes for easy operation..
With ER11 fixture, stable and not easy to loose.
The front end of the spindle can be shaken slightly, which makes it easy to retract the tool when drilling.
High quality material can make sure the durability and stability of the product.
Widely used in engraving machine drilling.

Check Stock

Shop Fox M1018 Combo Lathe/Mill

14 Spindle speeds at 117, 150, 220, 276, 290, 345, 360, 440, 450, 575, 640, 836, 1000, 1300 RPM.

Check Stock

CNC Spindle CNC Motor 220V 7.5KW 7500W Square Air Cooled Spindle Motor 4 Bearings ER32 18000RPM 300HZ for CNC Router Machine

【BASIC INFORMATION】-This spindle motor should work with 220v,300HZ vfd . 2 Poles, Collet ER32-6mm,Voltage: 220V ,Power: 7.5KW, Frequency: 300 Hz,....
【EASY AND FAST TO ASSEMBLE 】-We offer pre-soldered aviation wire , The appearance design of square spindle motor have 2 sides mounting holes to....
【SPINDLE ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
【WIDE APPLICATION】-Kinds of engraving and drilling material :Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass,....
【WARRANTY ASSURANCE】-We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing....

Check Stock

CNC Spindle CNC Motor 110V 1.5KW Air Cooled Spindle Motor 65mm 4 Bearings 24000RPM 400HZ for CNC Router Machine

【BASIC INFORMATION】-This spindle motor should work with VFD 110V,400HZ. 2 Poles, Collet ER11-6mm(compatible with bits between 1mm and 7mm....
【SPINDLE ADVANTAGE 】-It made less noise when working, Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than....
【EASY AND FAST TO ASSEMBLE 】-We offer pre-soldered aviation wire , You will take 2 minutes to connect spindle motor with VFD..
【WIDE APPLICATION】-Kinds of engraving and drilling material :Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass,....
【WARRANTY ASSURANCE】-We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing....

Check Stock

CO-Z 8.7\x29.5\ Mini Metal Lathe with 1100W Brushless Motor 5 Turning Tools, Benchtop Metal Lathe with LCD Display 2250rpm Max Variable Speed for Home Machinists Workshop DIY Metalworking Crafts

...-way tool post allows you to easily change your cutting tools and angles, permitting easy bevelling. This machine includes a large through-hole shaft to avoid inconvenience while working long pieces..
WIDE APPLICATION: Driven by DC motor, this mini metal lathe is suitable for many processing tasks including turning, drilling, threading and cutting. The adjustment dials on the saddle, tailstock, and center let you work with exact accuracy and precision..

Check Stock

VFD 220V 0.75KW 1hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor Speed Control HUANYANG HY-Series(0.75KW, 220V)

IMPORTANT NOTE: this VFD is applicable to THREE phase motor and NOT support external resistor.Fan runs all the time even though the motor isn't (fan functions need to be customized)..
This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.Work with 220V single phase input and 220V three phase input.you can just connected L1/L2 to any two of VFD input R/S/T.
This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter.This item use Sine wave PWN(SPWM) for the control system.It is designed which also could use USA 60hz single phase input.Can work well with the Mach 3 controller.
Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines.
If there are problems in use after you receive,please don't give us negative or natural feedback.Please contact us as soon as possible, we will help you solve problems or help you replace new one ..

Check Stock

SHOP FOX M1036 Micro Milling Machine, Small

Item may ship in more than one box and may arrive separately.
Motor: 0.2 HP, 2A, 110 Volt, single-phase.
Table size: 3-1/2-Inch by 8-Inch.Low speed range:0-3600,High speed range: 0-500.

Check Stock

PROXXON Bench Drill Press TBM 115, 38128 , Green

Competent drilling of micro holes down to1/64" (0.5 mm) with extremely high rotational accuracy.
High quality machined work table of ribbed die-cast aluminum (work table size 8 1/2" x 4 3/4" (220 x 120mm)).
3 spindle speeds of 1,800, 4,700 and 8,500rpm allowing triple torque at lower speeds.
Quill diameter 1 1/4" (32mm) with return spring, throat depth (column to drill spindle) 5 1/2" (140mm).
Scope of delivery: 1x PROXXON Bench Drill Press TBM 115 including MICROMOT Steel Collet Set. Part number: 38128.

Check Stock

Grizzly Industrial T10816 - Benchtop Hollow-Chisel Mortiser

Powerful Performance: The mortising machine is equipped with a 3/4 HP all-copper motor for long cool-running operation. The spindle turns at 3400 RPM, allowing you to power through a range of both hard & softwoods with ease..
Labor-Saving Design: The extra-long steel handle conveniently adjusts to different indexed positions to provide leverage. It is offset to put your wrist in a comfortable position for maximum power and control..
Secure & Flexible: Our square tenon machine has a security switch, which can be quickly started and used to ensure secure operation. The movable table is flexible and easy to control. The handwheel can also be pressed to quickly move the workpiece back and forth, from left to right, and cut accurately..
Complete Accessories: The accessories of this product include a 13 mm drill chuck, a 3/8 tenon cutter, a 19 mm chisel holder, and four hex wrenches, which provide more possibilities for this tenon machine..
All-purpose Use: This multifunctional mortise and tenon machine don't only cut wooden mortises into shapes such as circles, squares, and special squares but also can be used for circular grooves, internal grinding, and metal drilling, etc. Create intricate designs and detail like never before..

Check Stock

Shop Fox M1099 10 by 26" Bench athe, Metal, Large

...l featured mini lathe with professional capabilities at an incredible price. An indispensable workhouse in workshops for many years and featuring a small footprint suitable for home, commercial and educational use. Ideal for all kinds of precision metal work including: turning, facing, grooving, parting, threading, drilling, boring, knurling, and tapping. A true metalworking tool for professional outcomes vs. a look-a-like toy..
Machine features - The LittleMachineShop.com exclusive version of this machine includes a full 14" bed length for longer work pieces, a 1/3 HP variable speed spindle motor (with spindle speeds from 100 - 2500 RPM) and 2 speed ranges for low speed torque, Zero-settable hand wheels graduated in 0.001" on cross slide and compound rest, 4-way indexing tool post set for 5/16" (8 mm) tools, E-stop safety power switch, Rear apron shield, and backsplash..
Extended threading capability - A 16 TPI reversible lead screw for right-hand and left-hand threads, standard threading dial, and real top and bottom half-nuts, allow you to create every American Standard Unified inch screw thread from 4 to 80 threads per inch. With the extra 21 tooth change gear (included) you can create every American Standard Metric thread from 0.3 to 8.0 mm pitch.....

Check Stock

ER32 Collet Chuck Wrench Carbon Steel ER32 Collet MT4 Collet Chuck Holder Milling CNC Lathe Tool with ER32 Wrench

☀ [FEATURE] --- ER straight extension rod, long shaft, suitable for deep hole machining. Straight-type handle body for holding small drilling, milling tools..
☀ [PRACTICALITY] --- You can reduce the use of longer tools, which can reduce costs and improve efficiency. Stable diameter, other parts have been accurate ground to eliminate imbalance..
☀ [HIGH STRENGTH] --- ER32 Collet Holder is made of durable carbon steel, high accurate, tighten the nut straight, high rigidity, strong clamping..
☀ [APPLICATION] --- Mainly used for various types of drilling and milling machine, spindle Morse taper machine..
☀ [QUALITY ASSURENCE] --- If you have any question or need some suggestion about the products we sold, please feel free to contact us, we will provide you with quality after-sales service..

Check Stock

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

Includes: (1) Barracuda2 chuck body, (4) self-centering jaw sets, (1) woodworm screw chuck, (1) spindle adapter, (1) gear key, (1) Allen wrench, (8) screws, (1) storage case.
Barracuda2 chuck body is 3. 5" Diameter and weighs 2.60 lbs..
pre-threaded to 1" X 8TPI and includes 3/4" X 16TPI spindle adapter.
#1 step jaws: 3/32" To 1-3/8" & 11/16" To 2-3/8".
#2 round jaws: 7/8" To 1-1/2" &1-1/4" To 2".
With the variety of included jaws, The CSC3000C will mount most turning projects onto your Lathe.
including bowls, spindles, pens, other small turning projects, and much more.
Compatible with all additional C-Series Jaws and accessories: 7-3/4" Jumbo Flat Jaws (CJAWFJ2), 5" Small Flat Jaws (CJAWFJ1), Set of 2 Alligator Jaws (LCALJAWS), Pen Blank Drilling Jaws (CJAWPEN), 8-1/4" Super Finishing Jaws (CJAWXL), and more!.

Check Stock